Products

For the repair of normal and tubeless bicycle tires from 12 to 29 inches. Can be used for all common bicycle valves (Schrader, Presta valve and Dunlop valves). Also suitable for e-bikes.

Special combination of active agents for first aid in the event of punctured tires. Repairs flat tires without the need for removal. Not suitable for use on tubes that ripped or cut at the side, or if the tire has slipped off the rim.

PRODUCT VARIANTS

Description

An outstanding product for quickly sprucing up paintwork. Ideally seals paint surfaces against the weather. Also suitable for e-bikes.

Cleans and preserves bicycles. Gives all paint and color finishes a smooth surface with a brilliant shine and outstanding depth of color after easily polishing. The protective layer left behind smooths out scratches and protects the paint from the weather. Light road grime and greasy contaminants can be removed quickly and easily without making scratches.

Surfaces which are heavily contaminated must be thoroughly cleaned with Bike Cleaner (part no. 6053) and dried before treatment. Then spray on a thin coat of Gloss Spray Wax, let dry and polish with a soft rag or microfiber cloth. Shake can before use.

• Increased shock absorption and excellent durability
• Includes 2: Bar Tape, Finish Strips, Clamp Covers, and Screw In Plugs
• 1.8 mm – Weight: 66 g/2.32 oz | Length: 82 in/208 cm
• 2.5 mm – Weight: 74 g/2.61 oz | Length: 82 in/208 cm
• 3.2 mm – Weight: 86 g/3.03 oz | Length: 89 in/226 cm
• 4.6 mm – Weight: 102 g/3.59 oz | Length: 91 in/231 cm

• SKU: LOGRA300
• Weight: 115 grams / 4.06 ounces
• Length: 136 millimeters / 5.35 inches
• Diameter: 30.5 - 36.5 millimeters / 1.2 - 1.44 inches
• Right & left specific grips
• Multi-directional grip surface for superior traction
• Unique ergonomic shape for grip comfort
• Varied thickness for superior damping
• Compatible with MTB, BMX, ATV, and PWC

• Weight: 108 grams / 3.80 ounces
• Length: 140 millimeters / 5.51 inches
• Diameter: Medium (32 millimeters / 1.26 inches)

Specifications:

Application: Road (beginner to advanced)
Type: clipless pedals
Pedal System: Look Road

Technical Information:

Body Material: composite
Axle Material: Chromoly
Bearings: ball, needle
Height: 15.7 mm

Contact Area: 400 mm2
Release Angle: 0°, 4.5° or 9°, depending on the cleats
Release Force: 8 to 12 Nm
Recommended Cleats: Kéo Grip cleats
Pedal Centre to Crankarm Distance: 53 mm (extendable up to 55 mm)

Features:

Q-Factor Adjustment
Thanks to the 14 mm threading the new Look axle allows for Q-factor adjustment with the help of a washer that is sold separately. The Q-factor can be adjusted from 53 to 55 mm.

Chromoly Spindle for More Reliability
The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place. A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation).

Adjustable Release Force
The pedal release force can be adjusted between 8 and 12 Nm so that beginners and advanced riders can find the right amount of force for them.

Contents:

- 1 pair of Look Kéo Classic 3 clipless pedals
- 1 pair of Look Kéo Grip cleats, grey

Look KéO 2 Max Carbon

LOOK Kéo 2 Max Pedal - black

DESCRIPTION

• Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out.
• Its large and wide contact surface provides excellent pedaling stability.
• The Keo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.
• A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation (creating a shock on each rotation).
• LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by Andre GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

SPECIFICATIONS:

- Position memory: the new block clips onto the memory position to use exactly the same position as the old dock.
- Large support area
- Cleat float: 4,5 ° (grey)
- Weight: 68g (pair with bolt)
- Supplied with screws (6 screws 5x11mm and 6 slices)

What a great light. This is my go to bar light for my night rides and racing."

-Steve.✔ Verified Purchase ★ ★ ★ ★ ★

Max Output2600 lumens

Max Runtime15 hours

Battery6700mAh

ChargerUSB-C

WaterproofIPX6

Weight190 g

• Two high-power LEDs provide a maximum output of 2600 lumens.
• Unique combination of close-range floodlight and far-reaching spotlight beam.
• Customize lighting settings for different cycling scenarios through Magicshine App.
• Wireless remote control, straight forward to activate maximum output.
• Built-in light/vibration sensor, can be turned on/off through the App.
• Powered by two 18650 integrated batteries with a capacity of up to 6700mAh.
• USB-C fast charging and discharging.
• Up-down brightness control with accurate battery display.
• Aluminum housing and internal thermal management system ensure efficient heatdissipation and optimum performance.
• IPX6 waterproof rating, able to withstand all weather conditions.
• Universal Garmin quarter-turn mount allows for quick installation and removal.
• Fit 28mm, 31.8mm and 35mm handlebars, including aero options.

The TTA Out-Front Mount is designed for more than just lights - it holds two devices at a time securely, and comes with an array of fittings for cycle computers and accessories from multiple manufacturers. It provides easy access to your devices and is perfect for road cycling, mountain biking and daily commuting.

• Computer compatibility: Garmin™, Wahoo™, Bryton™, Polar™.
  (1) Garmin™: Edge 1030/Edge 1000/Edge 830/Edge 820/Edge 810/Edge 800/Edge 530/Edge 520/Edge 510/Edge 500/Edge 200/Edge 25/Edge 20/Edge Touring;
  (2) Wahoo™: Elemnt/Elemnt Mini/Elemnt Bolt/Elemnt Roam; (3) Bryton™: Rider 750/Rider 420/Rider 410/Rider one/Rider 530/Rider 330/Rider 310;
  (4) Polar™: V650/M460/M450;
• Accessory compatibility: GoPro™ Hero series /DJI™ action/insta360™ ONE/Cellphone ,etc.
• Supports handlebar sizes 31.8mm and 35mm.
• Fully Machined CNC Aluminum body with a hard-wearing plastic resin insert.
• Extremely lightweight at only 41 grams (excluding GoPro adaptor, bolts and shims)

WHAT IS TTA-C?

The TTA-C integrated out-front mount, with a variety of bonus accessories such as computer mounts, GoPro adapters, and more, allows you to easily mount two devices on the handlebar and keeps the cockpit tidy, perfect for road cycling, urban riding, and daily commuting.

Manufacturer:

Adapter to use Magura brake calipers with 203 mm rotors.

Technical Information:

Adapter Material:

aluminium

Bolt Material:

steel

Rotor Size:

203 mm

Models:

black / front IS to PM:

Fork Mount:

international standard

Caliper Mount:

post mount

Manufacturer Number:

0722321

black / rear IS to PM:

Frame Mount:

international standard

Caliper Mount:

post mount

Manufacturer Number:

0722325

black / Fox 40 to PM:

Fork Mount:

International Standard (Fox 40)

Caliper Mount:

post mount

Compatibility:

only for Fox Racing Shox 40 up to 2013

Manufacturer Number:

2700518

black / PM 6" to PM:

Frame Mount:

post mount 6"

Fork Mount:

post mount 6"

Caliper Mount:

post mount

Increased Height:

43 mm

Manufacturer Number:

2700517

black / PM 7" to PM:

Frame Mount:

post mount 7"

Fork Mount:

post mount 7"

Caliper Mount:

post mount

Increased Height:

23 mm

Manufacturer Number:

0724131

Contents:

• 1 x Magura disc brake adapter
• 2 x screw
• 2 x washers