Description

- Use: MTB
- Material: Butyl
- Dimensions: 27.5x2.50-3.00
- Valve: Schrader
- Valve length: 48 mm
- Weight (manufacturer): 303 gr.

DESCRIPTION

- Use: MTB
- Material: Butyl
- Dimensions: 29x2.50-3.00
- Valve: Presta
- Valve length: 48 mm
- Weight (manufacturer): 318 gr.

DESCRIPTION

Description

General purpose butyl inner tubes for everyday use. Standard inner tubes are made with high quality synthetic rubber with a wall thickness of 0.9 mm. Standard tubes offer good puncture resistance and a solid airtight performance in every instance.

Size: 27.5 x 1.5/2.0

Valve: Presta 48mm

DESCRIPTION 

VITTORIA tube 28 "standard butyl | 700 x 20 / 28C SV 80mm

The Vittoria Standard is an all-purpose butyl hose for everyday use.
It consists of high-quality, synthetic rubber with a wall thickness of 0.9 mm. Either way, it offers good puncture resistance and solid airtight performance.


Technical specifications:

Material: butyl rubber
intended use : all-purpose tube
Compatible sizes (inches): 28 "700 x 20c - 700 x 28c
Compatible sizes (ETRTO): 20 - 622 to 28 - 622
Valve length: 80 mm
Valve standard: SV (Presta)
Color: Black

Weight according to the manufacturer: 119g
Weight weighed: 121g

Note: The weights of the hoses may vary due to production.

PRODUCT DETAIL

VITTORIA tube 28 "Latex Competition | 700 x 25 / 28C SV 48mm

For a long time, latex tubes were limited to tube . Better ride quality and puncture resistance are mainly due to the use of the latex material. Now you can also use the advantages of latex tubes in your folding tire. Opposite Butylschläuchen you gain in puncture safety and lose rolling resistance. So you save a few watts again on the hunt for the next destination.
Since latex tubes lose air faster due to thinness, it is advisable to check the air before each exit.

Technical specifications:

Material: latex
intended use : road bike, triathlon, time trial
Compatible sizes (inches): 28 x 1 to 28 x 1.1
Compatible sizes (ETRTO): 25 - 622 to 28 - 622
Product id: -
Valve length: 48 mm
Valve standard: SV
Color: pink

Weight according to manufacturer: 85g
Weight weighed: 78.5g (including valve and valve cap)

PRODUCT DETAIL

VITTORIA tube 28 "Latex Competition | 700 x 25 / 28C SV 48mm

For a long time, latex tubes were limited to tube . Better ride quality and puncture resistance are mainly due to the use of the latex material. Now you can also use the advantages of latex tubes in your folding tire. Opposite Butylschläuchen you gain in puncture safety and lose rolling resistance. So you save a few watts again on the hunt for the next destination.
Since latex tubes lose air faster due to thinness, it is advisable to check the air before each exit.

Technical specifications:

Material: latex
intended use : road bike, triathlon, time trial
Compatible sizes (inches): 28 x 1 to 28 x 1.1
Compatible sizes (ETRTO): 25 - 622 to 28 - 622
Product id: -
Valve length: 48 mm
Valve standard: SV
Color: pink

Weight according to manufacturer: 85g
Weight weighed: 78.5g (including valve and valve cap)

VOXOM brake pads Bsc20 organic for SRAM Road | Level Ultimate | Level TLM

Organic brake pads with steel backing plate from Voxom for SRAM Road disc brakes, Level Ultimate and Level TLM disc brakes. Compared to metallic mixtures, the pad mixture has a shorter braking time, tends to be less noisy and reduces brake disc wear. However, the maximum heat absorption is lower than with metallic pads.

NOTE: The pads are not compatible with SRAM RED/Force/Rival AXS brakes.


Technical specifications:

Material topping: organic
Material carrier plate: steel
Compatibility brake: SRAM Red/Force/Rival (not for AXS), Level Ultimate/TLM
Color of carrier plate: grey

Weight according to the manufacturer: kA
Weight weighed: 16g

Specification:

• Physical Dimensions (LxWxH): 2.75" x .5" x 1.5"
• Weight: 8.5 grams (without strap)
• Battery: CR2032
• Battery Life: Up to 12 months
• Sweatproof: Yes (hand washable strap)
• Water Rating: IPX7 (waterproof up to 5 ft)
• Strap Length: Adjustable from 24" to 48" (stretched)

Wahoo KICKR CLIMB Indoor Incline Simulator - black/grey

Wahoo's latest innovation literally changes the level of your indoor workout! The KICKR CLIMB indoor mountain simulator is designed for exclusive use with the new KICKR and the new SNAP (2017 model year). When connected to your bike, the devices change the degree of incline during your indoor workout. The CLIMB is compatible with third-party apps. Whether you're riding a virtual track or performing a structured workout, the KICKR CLIMB changes both the degree of incline/descent and the resistance to create a truly spectacular riding experience. After all, the world is not flat - and therefore neither is your ride!

CAUTION: the manufacturer specifically states that the KICKR CLIMB should not be used with the old models of the KICKR and KICKR SNAP, as their design would cause the dropout of the frame to rub against the axle mount when rotating up and down. This could result in damage to the frame.

 

Features of the KICKR CLIMB

Changing the gradient in real time
The KICKR CLIMB physically adjusts to the position of your bike to simulate realistic road and hill climbs. This allows you to naturally change position on the bike, work specific muscle groups and improve pedaling technique to become a more efficient and powerful mountain rider outdoors.

Climbs of up to 20% and descents of up to -10%.
The KICKR CLIMB raises and lowers your bike to simulate inclines of up to 20% and declines of up to -10% when connected to the new KICKR or new SNAP. Hill climbs are more realistic than ever during stationary training!

Compatible with the Wahoo KICKR and KICKR SNAP.
The KICKR CLIMB is designed to be used with the new KICKR and KICKR SNAP stationary bike trainers (2017 editions) to ensure the best possible riding experience. It can be connected directly to the Smart Trainer to control the KICKR CLIMB.

Synchronization from close range
Sync your KICKR or KICKR SNAP quickly and directly with the remote control of the KICKR CLIMB. Press the remote button and off you go!

Lock and Unlock approach modes
Unlock mode allows the CLIMB to respond to the changing degree of incline from external sources, such as Zwift or TrainerRoad, or from your bike computers, ELEMNT or ELEMNT BOLT GPS.
Lock mode ensures that the KICKR CLIMB only responds to instructions from the remote control.

Manual gradient adjustment with the remote control
The KICKR CLIMB's remote control is mounted on the handlebars, allowing you to adjust the incline with the simple push of a button. When not in use, it can be conveniently stored on the top of the KICKR CLIMB.

Compatible with third-party apps
When synced with a KICKR or KICKR SNAP, the KICKR CLIMB adjusts to the changed degree of incline from select training platforms, such as Zwift and TrainerRoad, to ensure a truly spectacular riding experience. Whether you're riding a virtual track or performing a structured workout, the KICKR CLIMB changes both the degree of incline and resistance to help you get more out of your workout. Check out our FAQs for a full list of compatible apps.

Compatible with Wahoo ELEMNT and ELEMNT BOLT.
When you pair the ELEMNT or ELEMNT BOLT with the KICKR and KICKR CLIMB systems, you'll experience realistic ups and downs of your favorite rides or routes with your stationary trainer.

Compatible with quick release and thru axle
The KICKR CLIMB supports standard quick release hubs as well as 12 x 100, 15 x 100 and 15 x 110 thru axle hubs.

Technical specifications of the KICKR CLIMB

• Manufacturer number: WFBKTR5
• Max. Gradient: 20%
• Max. Slope: -10
• Compatible training devices: New Wahoo KICKR (2017 edition) and new KICKR SNAP (2017 edition).
• Data: Current incline
• Dimensions: 65.5 cm H x 13 cm W x 18 cm L
• Compatible axle standards: QR, 12x100, 15x100, 15x110
• Wireless software updates: Yes
• Compatible with third-party apps: Yes, when synced with KICKR or KICKR SNAP
• Includes: KICKR CLIMB unit, power supply, adapters for the following axle standards: quick release, thru axles: 12 x 100, 15 x 100 and 15 x 110