Tyre & Tube

DESCRIPTION 

Bicycle Tire Kellys Hornet 

The Bicycle Tire Kellys Hornet  is perfect for mountain bikes with 24” wheels. The center protrusions allow for excellent grip while maintaining low rolling resistance. The side protrusions provide support during turning. It can be used both as a front and rear tire. 

Technical description:

• MTB tire
• Low center protrusions
• Excellent grip
• Low rolling resistance
• Side protrusions provide support during turning
• Excellent self-cleaning properties
• Can be used both as front and rear tire
• Other designation: 50-406

DESCRIPTION 

Description of Schwalbe Hans Dampf Evolution MTB Folding Tire - AddixSpeedGrip - TLEasy - 29x2.60 Inches - black

Specifications:

Application:

All Mountain, Cross Country

Product Line:

Evolution Line (competition)

Type:

folding tyre

Tubeless System:

TL Easy

Technical Information:

Rubber Compound:

ADDIX Speedgrip

Tread:

HS 614

Carcass:

67 tpi

Puncture Protection:

RaceGuard

Strengths / Weaknesses:

Rolling Resistance:

8 (out of 10)

Grip:

7 (out of 10)

Puncture Protection:

6 (out of 10)

Durability:

6 (out of 10)

Models:

29x2.4:

Dimensions:

29 x 2.4"

ETRTO:

62-622

Air Pressure (max.):

3.5 bars

Load Capacity (max.):

125 kg

E-Bike Approved:

ECE-R75 certified for e-bikes with speeds up to 50 km/h

Manufacturer Number:

11654305

The essence of 30 years of racing experience: the Assegai folding tyre by Maxxis

Two years of development time, the essence of 30 years of racing experience and the expert knowledge of 50 years of tyre production have gone into Maxxis Assegai, the signature tyre from Greg Minnaar.

" My idea was to design a tyre around some of Maxxis' iconic tread patterns. I started in the centre by combining the Minion DHF and the Minion DHR II. The reason for this was that the surface of the DHF rolls well and maintains grip superbly on hardpack, in greasy turns and on wet roots and rocks. The DHR II added faster rolling speed and more aggressive braking.
Next, I worked on the 'extra' lug to give you more support when leaning the bike over so that there is a consistent feeling all the way onto the side lugs. And that is how we move on to talk about my all-time favourite tyre - the HighRoller. Maxxis engineers and I redesigned the HighRoller side lugs so that they had pretty much the same characteristics as the original did. But with the support provided by the extra lug, you have the ultimate wingman when cutting hard through flat turns.
In the end I took the lug height from the Shorty. The lugs are well-supported, which enables the raised tread to easily bite into forest soil and dry, dusty ground."
Greg Minnaar

Guidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

Enduro, Downhill

Ground Conditions:

hard pack, loose over hard, medium, loose, wet, mud

Type:

folding tyre

Tubeless System:

Tubeless Ready

Technical Information:

Rubber Compound:

3C MaxxGrip

Carcass:

2 x 120 tpi

Sidewall:

Double Down

Models:

29x2.5

Dimensions:

29 x 2.5"

ETRTO:

63-622

Air Pressure (max.):

2.5 - 3.4 bar

Manufacturer Number:

1117

Semi Slick for XC races: the Rekon Race folding tyre by Maxxis in a set

This tyre is a real XC champion. Its semi-slick tread makes it extremely fast, but still offers you enough grip to get to the front of the pack. The best way to ride the Rekon Race is on the rear wheel, in combination with an aggressive tyre on the front wheel.

Note from the manufacturer:
Maxxis strongly advises against the use of ammonia-based sealant. Ammonia has been proven to attack the carcass and can weaken it by up to 30% after only a few months, depending on the amount used.

Specifications:

Application:

Cross Country

Type:

folding tyre

Tubeless System:

Tubeless Ready

Technical Information:

Rubber Compound:

Dual

Carcass:

120 tpi

Sidewall:

EXO Protection

Models:

29x2.25

Dimensions:

29 x 2.25"

ETRTO:

57-622

Air Pressure:

2.4 - 4.1 bar

Manufacturer Number:

1098

The Rekon Race Dual EXO TR Skinwall 29" folding tyre by Maxxis - semi slick for XC races

The Maxxis Rekon Race Dual EXO TR Skinwall 29" folding tyre is a true XC champion. Its semi-slick tread makes it extremely fast, but still offers you enough grip to get to the front of the pack. The best way to ride the Rekon Race is on the rear wheel, in combination with an aggressive tyre on the front wheel.

Note from the manufacturer:
Maxxis strongly advises against the use of ammonia-based sealant. Ammonia has been proven to attack the carcass and can weaken it by up to 30% after only a few months, depending on the amount used.

Guidelines for replacing E-bike components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

Cross Country, All Mountain

Type:

folding tyre

Tubeless System:

Tubeless Ready

Technical Information:

Rubber Compound:

Dual

Carcass:

60 tpi

Sidewall:

EXO Protection

Models:

29x2.25

Dimensions:

29 x 2.25"

ETRTO:

57-622

Air Pressure:

2.4 - 4.1 bar

Manufacturer Number:

1728

The Maxxis Assegai 3C MaxxGrip EXO+ WT TR 29" Folding Tyre - The Greg Minnaar Signature Tyre

Note from the manufacturer:
Maxxis strongly advises against the use of ammonia-based sealant. Ammonia has been proven to attack the carcass and can weaken it by up to 30% after only a few months, depending on the amount used.

Guidelines for replacing E-bike components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

All Mountain, Enduro

Ground Conditions:

hard pack, loose over hard, medium, loose, wet, mud

Type:

folding tyre

Tubeless System:

Tubeless Ready

The Maxxis Minion DHR II 3C MaxxTerra EXO+ WT TR 29" Folding Tyre - More braking power, more traction, better cornering performance

Note from the manufacturer:
Maxxis strongly advises against the use of ammonia-based sealant. Ammonia has been proven to attack the carcass and can weaken it by up to 30% after only a few months, depending on the amount used.

Guidelines for replacing E-bike components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

All Mountain, Enduro

Ground Conditions:

loose over hard, medium, loose, wet

Type:

folding tyre

Tubeless System:

Tubeless Ready

Technical Information:

Rubber Compound:

3C MaxxTerra

Carcass:

60 tpi

Sidewall:

EXO+ Protection

Models:

29x2.4

Dimensions:

29 x 2.4"

ETRTO:

61-622

Air Pressure (max.):

3.4 bars

uidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

All Mountain, Cross Country

Product Line:

Evolution Line (competition)

Type:

folding tyre

Tubeless System:

TL Easy

Technical Information:

Rubber Compound:

ADDIX Speedgrip

Tread:

HS 614

Carcass:

67 tpi

Sidewall:

SnakeSkin

Strengths / Weaknesses:

Rolling Resistance:

7 (out of 10)

Grip:

7 (out of 10)

Puncture Protection:

7 (out of 10)

Durability:

8 (out of 10)

Models:

29x2.25:

Dimensions:

29 x 2.25"

ETRTO:

57-622

Air Pressure (max.):

3.7 bars

Load Capacity (max.):

120 kg

E-Bike Approved:

ECE-R75 certified for e-bikes with speeds up to 50 km/h

Manufacturer Number:

11654267

29x2.4:

Dimensions:

29 x 2.4"

ETRTO:

62-622

Air Pressure (max.):

3.5 bars

Load Capacity (max.):

125 kg

E-Bike Approved:

ECE-R75 certified for e-bikes with speeds up to 50 km/h

Manufacturer Numbers:

• black: 11654268
• black-bronze skin: 11654306

29x2.6:

Dimensions:

29 x 2.6"

ETRTO:

65-622

Air Pressure (max.):

3.0 bars

Load Capacity (max.):

115 kg

E-Bike Approved:

ECE-R75 certified for e-bikes with speeds up to 50 km/h

Manufacturer Number:

11654271

Guidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

All Mountain, Cross Country

Product Line:

Performance Line (intensive use)

Type:

folding tyre

Tubeless System:

Tubeless Ready

Technical Information:

Rubber Compound:

ADDIX Performance

Tread:

HS 614

Carcass:

67 tpi

Strengths / Weaknesses:

Rolling Resistance:

6 (out of 10)

Grip:

6 (out of 10)

Puncture Protection:

6 (out of 10)

Durability:

7 (out of 10)

Models:

29x2.25:

Dimensions:

29 x 2.25"

ETRTO:

57-622

Air Pressure (max.):

3.7 bars

Load Capacity (max.):

120 kg

E-Bike Approved:

ECE-R75 certified for e-bikes with speeds up to 50 km/h

Manufacturer Number:

11654281

29x2.4:

Dimensions:

29 x 2.4"

ETRTO:

62-622

Air Pressure (max.):

3.5 bars

Load Capacity (max.):

120 kg

E-Bike Approved:

ECE-R75 certified for e-bikes with speeds up to 50 km/h

Manufacturer Number:

11654284

Note:
The load capacity shown refers to only one tyre. To check whether the tyre is suitable for your total weight (rider + bike), this value can be doubled, as the weight is then distributed over two tyres.

Features:

• down-country tyre with a wide range of uses
• bevelled centre lugs for fast rolling
• stable and grippy shoulder lugs provide grip and support in curves

Technology:

Performance
Excellent quality for intensive use.

ADDIX Performance
ADDIX is also available as a Performance compound. The mixture is very durable and meets a wide range of requirements.

Tubeless Ready
For the Performance Line MTB tyres, the sidewall is reinforced with rubber.

E-50
For fast e-bikes a special approval of the tyres is necessary. Tyres with ECE-R75 approval valid throughout Europe are the simplest solution here. All Energizer tyres carry the test mark and are approved for vehicles up to 50 km/h.

Weight:

Guidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

All Mountain, Cross Country

Product Line:

Performance Line (intensive use)

Type:

folding tyre

Tubeless System:

Tubeless Ready

Technical Information:

Rubber Compound:

ADDIX Performance

Tread:

HS 614

Carcass:

67 tpi

Strengths / Weaknesses:

Rolling Resistance:

6 (out of 10)

Grip:

6 (out of 10)

Puncture Protection:

6 (out of 10)

Durability:

7 (out of 10)

Models:

27.5x2.25:

Dimensions:

27.5 x 2.25"

ETRTO:

57-584

Air Pressure (max.):

3.7 bars

Load Capacity (max.):

120 kg

E-Bike Approved:

ECE-R75 certified for e-bikes with speeds up to 50 km/h

Manufacturer Number:

11654280

27.5x2.4:

Dimensions:

27.5 x 2.4"

ETRTO:

62-584

Air Pressure (max.):

3.5 bars

Load Capacity (max.):

120 kg

E-Bike Approved:

ECE-R75 certified for e-bikes with speeds up to 50 km/h

Manufacturer Number:

11654283

Note:
The load capacity shown refers to only one tyre. To check whether the tyre is suitable for your total weight (rider + bike), this value can be doubled, as the weight is then distributed over two tyres.

Features:

• down-country tyre with a wide range of uses
• bevelled centre lugs for fast rolling
• stable and grippy shoulder lugs provide grip and support in curves

Technology:

Performance
Excellent quality for intensive use.

ADDIX Performance
ADDIX is also available as a Performance compound. The mixture is very durable and meets a wide range of requirements.

Tubeless Ready
For the Performance Line MTB tyres, the sidewall is reinforced with rubber.

E-50
For fast e-bikes a special approval of the tyres is necessary. Tyres with ECE-R75 approval valid throughout Europe are the simplest solution here. All Energizer tyres carry the test mark and are approved for vehicles up to 50 km/h.

Weight:

Replacement tubeless plugs for the Tubeless Kit and Classic Tubeless Kit. Repairs larger holes directly and quickly and can be applied very practical from the outside. No need to remove the tyre.