inish Line's Shock Oil is a premium suspension fluid formulated specifically for oil damped bicycle forks. 100% compatible with ALL suspension designs and seals.

A semi-synthetic mineral oil formulation that has become the choice of professionals worldwide. Will not thicken or thin due to changes in temperature. Low foam technology delivers consistent and predictable damping in all riding conditions.

Race proven to deliver superior performance in all suspension systems. A high viscosity index provides consistent damping through the longest and most extreme of riding conditions. 16oz bottles available in 5 different oil weights: 2.5wt, 5wt, 7.5wt, 10wt, 15wt.

Customizing fork performance with oil fill and weight choice: You can speed up or slow down your fork's compression and rebound characteristics by changing the oil viscosity. 2.5wt is lighter/thinner/faster. 15wt is heavier/thicker/slower. If you're lightweight/smaller, go thinner – if you’re bigger/heavier, go thicker. Plus, you can change the oil height/fill volume in your fork to make the spring rate more linear/equal or progressive/increasing as it comes to the end of the compression stroke/travel.

• Combines reliability of mineral oils with durability of synthetic oils
• Race proven, good for all suspension systems, seals, and riding conditions
• Prevents stiction and viscosity breakdown
• Won’t foam – provides consistent and predictable damping.

Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. 

Available in several widths, to fit rims and tyres from cyclocross, to Gravel to Plus.

EXCLUSIVE FEATURES:

• Very light weight (starting at 53g for one 29” wheel) and high durability
• Premium material (high density EVA) absorbs shocks but not sealant
• Can be easily adapted to common wheel diameters (26”, 27.5”, 29”)
• No need for specific tubeless valves

CHARACTERISTICS:

Why we created it

People riding aggressively on rocky terrain would often like to reduce tyre pressure for better traction and control, limited by the worry of “hitting hard”, pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That’s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These product fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With Tyreinvader we want to offer an excellent yet simple solution, keeping weight and cost low

Lightweight

The weights for the different Tyreinvaders refer to the product uncut (for 29” wheels), so it’s even lower when adapted to 27.5” or 26” wheels.

• Tyreinvader 35 = 48 g
• Tyreinvader 40 = 53 g
• Tyreinvader 50 = 68 g
• Tyreinvader 55 = 80 g
• Tyreinvader 60 = 92 g

Tolerance on nominal weight is + / - 5%

Great durability thanks to premium material

Tyreinvader is made of high density EVA (ethylene-vinyl acetate), a closed cell polymer commonly employed by the sport shoe industry: this material can resist heavy impacts with very little damage and is very durable.

We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.

Sealant-optimized

EVA has a closed cell structure that cannot absorb any sealant, letting it free inside the tyre cavity.

Besides, the cut-outs of Tyreinvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.

As inserts have surfaces that are wetted by the sealant, a fraction of it won’t be available to repair punctures. For this reason - also with Tyreinvader - we recommend to slightly increase the quantity of sealant normally employed, by 30 ml.

The cut-outs on Tyreinvader allow the sealant to move freely inside the tyre cavity, something that is much more difficult when using solid “donut-shaped” inserts.

Tyreinvader has been designed to function with our Caffélatex sealant, ammonia free.

Easy to assemble and mount

Just cut Tyreinvader following the instructions (for 27.5” and 26”; no need to cut for 29”), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little to fit the wheel circumference), add sealant, go ride.

Our Tech Videos can help clear any doubt.

If needed, Tyreinvader can be first mounted on the wheel without tyre, to stretch and make successive mounting easier.

Real run flat behavior

Tyreinvader has been sized to sit tightly on the rim, so that - in case of emergency - it will push the tyre against the rim, allowing to ride short distances on the flat tyre. This should be considered an exceptional functioning mode, as we don’t recommend to ride Tyreinvader at zero pressure on purpose.

Compatible with any tubeless valve

The shape of Tyreinvader and a specific cut-out (to be positioned over the valve) make tyre inflation always easy, with any tubeless valve. No need for special tubeless valves.

Reduced influence on normal riding

Tyreinvader is flat and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). We still recommend to test ride Tyreinvader before racing with it.

We don’t encourage the use of lighter tyres nor of much lower inflating pressure: Tyreinvader simply allows to set tyres up the way the rider likes them, without worrying about pinch flats.

Functional packaging

Tyreinvader is sold in pairs (so 2 pieces per pack, including 4 zip-ties to assemble them), inside a transparent bag. This bag can be used to safely store Tyreinvader after removing it, to avoid sealant stains. It can also be used for other purposes, like shopping or carrying little items.

What about the little aliens and the arcade font?

Who doesn't remember SpaceInvaders? Even those who are too young for that can still learn about this staple in the video game history, and play it thanks to retrogaming. Besides, our product is actually invading the tyre, thus “Tyreinvader”.

The cut-outs serve several purposes: to save weight, to allow easy sealant flow and… to offer some cool branding/styling opportunities.

• The SCOTT Light Padded Shorts, with EVA padding for cushioning, is designed to flex and follow body shape and fits nicely underneath layers on ski or bike days.

• CONSTRUCTION

  EVA Foam, stretch and breathable fabrics

• COMPOSITION

  Protective parts: 100% Ethylene-vinyl acetate, Textile parts: 100% Polyester

• SIZES

  S, M, L, XL

• FEATURES

  Ergonomically shaped EVA pads protecting hip, thigh and coccyx areas
  Compression fit and flexible construction providing freedom of movement
  Stretchable and open mesh fabrics used for main construction
  Slim fit

Description of Schwalbe Jumbo Jim Evolution Fatbike Folding Tire - AddixSpeedGrip - LiteSkin - 26x4.0 Inches

Specifications:

Technical Information:

SHIMANO - Junction A - E-TUBE - Under Stem Mount - 5-Port

SHIMANO's SM-EW90-B 5-port Junction A mounts neatly to the bike stem and connects with E-TUBE wires from DI2 shifters, accessory shifters, and the downtube junction wire. The SM-EW90 junction box features an integrated battery level indicator, charging port, and gear index setup switch.

Description of Shimano Di2 EW-RS910 Junction for Bar / Frame - fits Dura Ace / Ultegra

PRODUCT SPECIFICATIONS

SHIFT LEVER SET, SL-M780, DEORE XT,3X10 SPEED, W/ O.G.D, W/BASE CAP,R:2050MM L:1800MM, BLACK SP41 SEALED OUTER(1800/ 1200MM),6MM CAP X5, NOSE CAP X1,IND.PACK

The Supersonic Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position despite a fairly minimalist appearance the Sonic/Ergo offers a comprehensive fit range for exactly this purpose.

The extension length and rotation can be easily adjusted using the top bolt.

The Supersonic bracket (previously known as the J5) is the premier model of the new generation Profile Design brackets. It offers easier adjustment and a greater fi t range than anything that came before it.

There are 80 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip on bar on the market (and in history).

Key Features

Genuine Fox fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox. 

Kit includes: 

• 2 Dust wiper / oil seals 
• 2 Foam lubricating rings 
• 3 crush washers (Including 1 for Talas cartridges)

KEY FEATURES

• Construction with less seams 
• Extremely breathable mesh
• Highly perforated palm
• Silicone print for better grip
• Magnet to keep them together