Specifications:

Technology:

DESCRIPTION

DESCRIPTION

Shimano B03S Resin Disc Brake Pads

Shimano BL-MT200 + BR-MT200 Hydraulic Disc Brake - Postmount - Set FW

Shimano BR-MT520 + BL-MT501 disc brake set - 4 piston power

Specifications:

Technical Information - Calliper:

Technical Information - Lever:

Features:

Shimano Deore XT M8100 - The world is your canvas.

The original MTB group continues its legacy of remaining the standard for mountainbikers everywhere. Nearly three decades in, the Deore XT brand is defined by its trail-tested durability, reliability and performance. As mountainbiking becomes faster and faster and the terrain even more technical, the M8100 series aims to give the rider the necessary feeling of confidence and safety.

Following the principle of passing on the experiences and technologies of the top series, the Deore XT incorporates the innovations of the high-end XTR components. Accordingly the new 12-speed groupset features of course Micro Spline and Hyperglide+.

Shimano Deore XT M8100 Enduro brake set consisting of the ergonomic BL-M8100 brake lever and the powerful BR-M8120 4-piston caliper. Trouble-free maintenance is provided by the proven One Way Bleeding concept and the Easy Hose Joint System which simplifies brake hose exchanges.

J-Kit (Easy Hose Joint System)

At brake systems with J-Kit hose joint the brake lever features an integrated olive what makes an easy brake hose installation and removal possible.

Shimano Deore XT BL-M8100 brake lever

The Shimano Deore XT BL-M8100 brake lever's clamp is angled what leads to direct contact between compensation tank and handlebar. The so created two contact points provide significantly increased stiffness, which ultimately results in more direct feedback and thus more braking power.

The braking performance is optimized as well by the Shimano SERVOWAVE technology which improves the lever's modulation ability. Because the brake lever absorbs a lot of braking distance right at the start of its movement, the brake pads have disc contact more quickly and it remains more lever travel to adjust braking force. That is why SERVO WAVE brake systems are characterized by faster response, higher performance and shorter idle travel.

The BL-M8100 is even under high temp conditions 10 % stiffer than its predecessor. The brake lever's reach is individually adjustable without the use of any additional tools. Thanks to the I-Spec EV design the Deore XT SL-M8100-I shifting levers can be mounted directly to the brake lever.

Shimano Deore XT BR-M8120 disc brake caliper

The Shimano Deore XT BR-M8120 Postmount brake caliper is with its 4-piston construction perfect for Trail and Enduro use. Compared to its predecessor a quicker piston retraction leads to superior modulation what results in an improved braking control. The N03A Resin or N04C Metal brake pads with Ice-Tech cooling fins in combination with the powerful 4-piston caliper guarantee extremely good deceleration. In addition, the design with 4 pistons reduces disc brake rotor wobbling noise and increases the braking power by 10 % compared to the BR-M8020 caliper.

Material:

lever: aluminium (anodized)
master cylinder, caliper: aluminium (painted)
pistons: ceramic

Shimano Deore XT M8100 - The world is your canvas.

The original MTB group continues its legacy of remaining the standard for mountainbikers everywhere. Nearly three decades in, the Deore XT brand is defined by its trail-tested durability, reliability and performance. As mountainbiking becomes faster and faster and the terrain even more technical, the M8100 series aims to give the rider the necessary feeling of confidence and safety.

Following the principle of passing on the experiences and technologies of the top series, the Deore XT incorporates the innovations of the high-end XTR components. Accordingly the new 12-speed groupset features of course Micro Spline and Hyperglide+.

Shimano Deore XT M8100 Enduro brake set consisting of the ergonomic BL-M8100 brake lever and the powerful BR-M8120 4-piston caliper. Trouble-free maintenance is provided by the proven One Way Bleeding concept and the Easy Hose Joint System which simplifies brake hose exchanges.

Features - Shimano 2-Piston L05A-RF Resin Ice-Tec Disc Brake Pads

• Pad Shape: Narrow
• BR TYPE: 2-Piston
• Flexible compound
• Less noise
• Focus on controllable performance
• Designed for dry and wet conditions
• Successor model of L03A

Product features

• Resin pads: Make less noise than sintered metal pads and offer better modulation
• Radiator fin: Provides long pad life and less fade by cooling technology
• Group: Dura Ace, Ultegra, 105, GRX
• Radiator Fin: Yes
• Surface form: Narrow
• BR type: 2-Piston
• Modulation: High (5 of 5)
• Performance: Above average (4 of 5)
• Durability: Above average (4 of 5)
• Anti-fading: Average (4 of 5)
• Quiet: High (5 of 5)

Compatibility

• BR-M8110, BR-M7110, BR-R9170, BR-R8070, BR-R7070, BR-4770, BR-RS805, BR-RS505, BR-RS405, BR-RS305, BR-U5000, BR-RX810, BR-RX400, BR-R9270

Material

• Compound: Resin (organic)
• Plate: Aluminium

Features - Shimano 2-Piston B05S-RX Resin Disc Brake Pads

• Pad Shape: Wide
• BR TYPE: 2-Piston
• Flexible compound
• Less noise
• Focus on controllable performance
• Designed for dry and wet conditions
• 3 type split pins included
• Successor model of B03S

Product features

• Model: B05S-RX
• Resin pads: Make less noise than sintered metal pads and offer better modulation
• Radiator Fin:  No 
• Surface form: Wide
• BR type: 2-Piston
• Modulation:  High (5 of 5)
• Performance:  Above average (4 of 5)
• Durability:  Above average (5 of 5)
• Anti-fading:  Average (3 of 5)
• Quiet:  High (5 of 5)

Compatibility

• BR-C501, BR-M575, BR-M525, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465, BR-M447, BR-M446, BR-M445, BR-M416, BR-M416A, BR-M415, BR-M4050, BR-M3050, BR-M395, BR-M375, BR-M365, BR-M355, BR-M315, BR-T675, BR-T615, BR-TX805, BR-MT500, BR-MT400, BR-MT200, BR-UR300

material

• Compound: Resin (organic)
• Plate: Steel

Features - Shimano L04C Metal Ice-Tec Disc Brake Pads with Radiator Fin

• Pad Shape: Narrow
• BR TYPE: 2-Piston
• High-strength covering material
• Long service life
• High braking power under extreme conditions
• Improved heat dissipation through aluminium cooling fins

Product features

• Model: L04C
• Metal pads: Consistently perform well in dry or wet conditions, and have excellent power and durability
• Radiator fin: Provides long pad life and less fade by cooling technology
• Group: XT (M8110), SLX (M7110), Dura Ace, Ultegra, 105, Tiagra, GRX
• Radiator Fin: Yes
• Surface form: Narrow
• Modulation: Above average (4 of 5)
• Performance: High (5 of 5)
• Durability: High (5 of 5)
• Anti-fading: High (5 of 5)
• Quiet: Above average (4 of 5)

Compatibility

• BR-M8110, BR-M7110, BR-R9170, BR-R8070, BR-R7070, BR-4770, BR-RS805, BR-RS505, BR-RS405, BR-RS305, BR-U5000, BR-RX810, BR-RX400, BR-R9270

Material

• Compound: Metal
• Plate: Aluminium

H03C Metal Ice-Tec Disc Brake Pads

The Shimano H03C metal brake pad with radiator fin for SAINT BR-M820, ZEE BR-M640 and XT BR-M8020 disc brake.

Pair of genuine Shimano replacement pads contains 1 pair disc brake pads Shimano H03C incl. spring and split pin

Alloy and Steel back plate using Ice-Tec heat radiation cooling fins with metal sintered braking compound

• Metal pads: Consistently perform well in dry or wet conditions, and have excellent power and durability
• Radiator fin: Provides long pad life and less fade by cooling technology

Features - Shimano 2-Piston K04S Metal Disc Brake Pads

• Pad Shape: Narrow
• BR TYPE: 2-Piston

Product features

• Metal pads: Consistently perform well in dry or wet conditions, and have excellent power and durability
• Group: XTR, XT, SLX, Dura Ace, Ultegra, 105, Tiagra, GRX
• Radiator Fin: No 
• Surface form: Narrow
• Modulation: Above average (4 of 5)
• Performance: High (5 of 5)
• Durability: High (5 of 5)
• Anti-fading: High (5 of 5)
• Quiet: Average (3 of 5)

Compatibility

• BR-M9100, BR-M9110, BR-M8110, BR-R9170-F, BR-R9170-R, BR-R8070-F, BR-R8070-R, BR-R7070-F, BR-R7070-R, BR-4770-F, BR-4770-R, BR-RS805-F, BR-RS805-R, BR-RS505-F, BR-RS505-R, BR-RS405-F, BR-RS405-R, BR-RS305-F, BR-RS305-R, BR-U5000-F, BR-U5000-R, BR-RX810-F, BR-RX810-R, BR-RX400-F, BR-RX400-R

Material

• Compound: Metal
• Plate: Steel

Features - Shimano 2-Piston K04Ti Metal Disc Brake Pads

• Pad Shape: Narrow
• BR TYPE: 2-Piston
• Titanium back plate: Titanium back plates with metal pads are lighter and insulate heat better
• Metal pads: Consistently perform well in dry or wet conditions, and have excellent power and durability

Product features

• Use: Road/Cyclocross
• Group: Dura Ace, Ultegra, 105
• Material: Metal
• Radiator Fin: No 
• Surface form: Narrow
• BR TYPE: 2-Piston
• Modulation: Above average (4 of 5)
• Performance: High (5 of 5)
• Durability: High (5 of 5)
• Anti-fading: High (5 of 5)
• Quiet: Average (3 of 5)

Compatibility

• BR-M9100, BR-M9110, BR-M8110, BR-R9170-F, BR-R9170-R, BR-R8070-F, BR-R8070-R, BR-R7070-F, BR-R7070-R, BR-4770-F, BR-4770-R, BR-RS805-F, BR-RS805-R, BR-RS505-F, BR-RS505-R, BR-RS405-F, BR-RS405-R, BR-RS305-F, BR-RS305-R, BR-U5000-F, BR-U5000-R, BR-RX810-F, BR-RX810-R, BR-RX400-F, BR-RX400-R, BR-R9270

Material

• Compound: Metal
• Plate: Titanium

SHIMANO N03A-RF DISC BRAKE PAD AND SPRING

BETTER MODULATION FOR A BETTER RIDE

When braking control and smooth, quiet operation are critical to the ride, the top-of-the-line Shimano XTR series N03A-RF Disc Brake Pads are designed to offer exceptional modulation, with quiet, smooth, controllable braking. Compatible with many Shimano XTR, XT, and SLX braking systems (see full list below), these pads provide an exact fit, with legendary Shimano quality. The N03A-RF brake pads boast Shimano’s 3rd generation resin pad compound, which reduces noise, provides exceptional modulation, and is rated for above-average stopping power. Increase your speed on the trails by keeping your braking under control with the N03A-RF Disc Brake Pads.

FEATURES

• Resin pad compound (3rd generation) provides better modulation and quieter braking than a metallic compound
• Radiator fin design helps to aid in cooling and reduce brake fade
• Lightweight alloy backing plate for reduced weight with excellent performance
• Compatible with the following Shimano brake models BR-M9120, BR-M8120, BR-M7120
• Manufacturer part number WP-Y1XD98010

Features - Shimano 2-Piston K05TI-RX Resin Disc Brake Pads

• Pad Shape: Narrow
• BR TYPE: 2-Piston
• Flexible compound
• Less noise
• Focus on controllable performance
• Designed for dry and wet conditions
• Smooth and noiseless braking process
• Optimized heat dissipation
• Successor model of K03Ti

Product features

• Use: MTB / Road
• Model: K05TI-RX
• Resin pads: Make less noise than sintered metal pads and offer better modulation
• Titanium back plates: Titanium back plates with metal pads are lighter and insulate heat better
• Group: XTR (M9100 / M9110), Deore XT, SLX, Dura-Ace, Ultegra, 105, Tiagra, GRX
• Radiator Fin: No 
• Surface form: Narrow
• Modulation: High (5 of 5)
• Performance: Above average (4 of 5)
• Durability: Above average (4 of 5)
• Anti-fading: Average (3 of 5)
• Quiet: High (5 of 5)

Compatibility

• BR-M9100, BR-M9110, BR-M8110, BR-R9170, BR-R8070-F, BR-R7070, BR-4770, BR-RS805, BR-RS505, BR-RS405, BR-RS305, BR-U5000, BR-RX810, BR-RX400, BR-R9270

Material

• Compound: Resin (organic)
• Plate: Titanium

Quieter control for any terrain

SHIMANO SLX BL-M7100 BRAKE LEVER

The SLX BL-M7100 hydraulic brake lever is distinguished by Shimano 's SERVOWAVE technology, which ensures particularly good dosing. Because the brake lever absorbs a large braking distance from the start of its movement, the brake pads make contact with the brake disc more quickly and there is more lever distance left to modulate the braking force. SERVO WAVE braking systems are therefore distinguished by a faster reaction, higher power and a shorter idle stroke.

The design of the SLX brake lever follows that of the XTR model and is therefore not mounted parallel to the handlebar, but at an angle, so that it rests, in addition to the clamp, on a second point on the handlebar , which makes it significantly stiffer than before. For individual adaptation, the lever is equipped with a tool-free grip width adjustment option. Thanks to the I-Spec EV design, the SLX SL-M7100-I shifters can be mounted directly on the brake lever.

SHIMANO SLX BR-M7120 DISC BRAKE CALIPER

The Shimano SLX BR-M7120 Postmount brake caliper is ideal for enduro and downhill thanks to its 4-piston construction. Thanks to an accelerated piston reset, the modulation behavior could be further improved compared to its predecessor, which results in better braking control. The N03A resin brake pads with Ice-Tech cooling fins, in combination with the powerful 4-piston brake caliper, guarantee very good deceleration.

Please take into account the maximum permitted diameter for the brake discs of your fork or frame.

• Brake line: SM-BH90-SBM (1700mm)
• Brake lever: BL-M7100 (right version)
• Brake Pads: N03A Resin | N04C Metal (each with cooling fins, supplied)
• D03S Resin | D02S Metal (respectively without cooling fins, optional)
• Brake disc: recommended: SM-RT70 (not included in delivery)
• Scope of delivery: hydraulic disc brake kit, filled and bled:
• BL-M7100 Brake lever, right
• BR-M7120 Brake caliper incl. brake pads
• SM-BH90-SBM Brake line, 1700 mm
• Material: Lever: aluminum (anodized)
• Brake lever housing, brake caliper: aluminum (painted)
• Piston: ceramic

FEATURES

DESCRIPTION

ST-R9120 & BR-R9170 Single brake kit! Left/Front

More information about the ST-R9120

More information about the BR-R9170

Here you can find the disc brake set right rear

ST-R9120

Hydraulic Disc Brake Dual Control Lever (2x11-speed)

• Shorter lever stroke delivers quick and intuitive rear shifting
• A redesigned internal shifting unit provides lighter front shifting operation
• Front shifter redesigned with new front derailleur
• Ergonomic shape and refined hood cover material
• Expanded reach adjustment range (14mm) Mechanical Brake
• More customizable and precise lever position
• Easy brake control Hydraulic Brake
• Consistent braking performance in any condition
• Weight: 505g (ST-R9120, Pair)

BR-R9170

Hydraulic Disc Brake Caliper

• Integrated low-profile caliper design utilizes Flat Mount system
• Powerfully integrated brake performance
• Better control and confidence in race conditions
• Optimally balanced hydraulic brake system for racing
• Lightweight design
• Improved heat dissipation
• Simple set up and maintenance
• Easy tool access, wheel replacement and bleeding process
• Wide pad clearance
• One way bleeding
• Recommended rotor: SM-RT900
• Weight: 256g (BR-R9170, Pair)

Dealer's Manual Hydraulic Disc Brake

FEATURES

SHIMANO Brake Disc Center Lock RT-MT900 | 140 mm IceTech FREEZA

With the Ice-Tech cooling technology, the RT-MT900 brake disc ensures constant braking performance even on longer descents. The brake disc is characterized by a three-layer sandwich construction. The stainless steel flanks with an aluminum core offer significantly improved heat dissipation. This allows the temperature to be reduced by around 100 ° C.
In addition, the FREEZA aluminum cooling fins reduce the system temperature by approx. Another 50 ° C due to their enlarged surface. Due to the higher heat dissipation, smaller brake discs can be installed than usual. In addition, the service life of the brake lining is significantly extended.
As is typical for Shimano, the discs are suitable for the center lock mount , which enables quick and easy assembly, offers a secure hold and ensures a clean and compact look. A lighter aluminum carrier saves a few grams of weight compared to the previous version.


Technical specifications:

Brake surface material: stainless steel
Material spider: aluminum
Execution: two-part
Disc mount: Center Lock
Diameter: 140 mm
Thickness: 1.75mm
Friction ring width: 13.5 mm
Recommended brake pads: resin or metal
Technology / Features: ICE TECHNOLOGIES, ICE TECHNOLOGIES FREEZA
Color: silver, black

Weight according to the manufacturer: 88g
Weight weighed: 95.3g (including center lock ring)


Scope of delivery:

1x SHIMANO brake disc Center Lock RT-MT900 | 140 mm IceTech FREEZA
1x center lock ring with internal tool holder

Shimano Ultegra Di2 ST-R8170 STI brake/shift lever

The ST-R8170 STI levers are not only characterised by their optimised ergonomics and even more precise dosing of the hydraulic disc brakes, but also impress above all with lightning-fast shifting processes, which are achieved not least through the Wireless functionality.

The wireless connection also offers another advantage: without electric cables, installation is easier and the cockpit appears tidier. Nevertheless, the shift/brake levers still offer a cable connection (EW-SD300) for the use of additional shifters in the drops or the top of the handlebar. For numerous customisation and configuration options, compatibility with the improved E-Tube Project app, which, like previous versions, allows you to adjust shift modes (Synchro-/Semi-Synchro-Shift, Multi-Shift), shift speed and button assignment on the fly.

To ensure that the braking performance is in no way inferior to the shifting functionality, the Ultegra Dual Control levers feature Servowave technology. With the help of an extended brake control range, this ensures excellent dosing that offers optimum comfort and control even in challenging conditions. Of course, for individual adjustment, the levers feature the option of reach and free stroke adjustment.

Shimano Ultegra BR-R8170 disc brake caliper

All around improved, the Shimano Ultegra BR-R8170 caliper offers optimised dosing, quieter braking performance and extremely simplified maintenance.

While a faster-gripping initial braking force always gives the feeling of full control, the 10 % increase in brake pad spacing allows for a significant reduction in noise during braking, despite a flatter overall construction. In addition, when the RT-MT900 brake disc rotor (sold separately) is used, its deformation-resistant design, even with increasing heat, helps to create an extremely quiet and smooth braking system.

To simplify maintenance, the hydraulic 2-piston brake caliper not only features the proven One-Way-Bleeding system, but also a separate arrangement of bleed nipple and opening screw. On the one hand, this minimises the risk of the bleed kit hose slipping off when opening or closing the system and, on the other hand, makes it unnecessary to dismantle the caliper from the frame for bleeding process.

Shimano XTR M9100 - Back to where it all started.

The Shimano XTR M9100 group was developed to meet the demands of mountainbike racers at the highest level and guarantees "second to none" performance. The range offers the most versatile components for XC, Enduro and Marathon races.

It all started with the search for the ultimate MTB racing components and now the XTR continues 27 years of innovation with even more speed, focus and control. It is jam-packed with the technological advantages needed to push the boundaries of today's insanely demanding courses. It is lighter, smoother, more durable and versatile to transfer all pedal-pounding watts into ground speed with extreme efficiency.

J-Kit (Easy Hose Joint System)

At brake systems with J-Kit hose joint the brake lever features an integrated olive what makes an easy brake hose installation and removal possible.

Shimano XTR BL-M9120 brake lever

The Shimano engineers have redesigned the XTR 9100 brake levers from a braking system that had been already the benchmark among mountainbike braking systems. For the BL-M9120 levers both the clamp and the lever body itself have been modified. The clamp moves further into the middle of the lever and is angled. This cleverly supports the outer end of the expansion tank directly on the handlebars and creates an additional counter bearing for lever actuation.

This significantly increases stiffness and stability, what ultimately leads to an even more direct brake feeling and improved control. So the BL-M9120 is 8 % stiffer than its predecessor, too. The Enduro brake lever is especially developed for use with the BR-M9120 4-piston caliper and features a tool-free reach adjustment as well as an additional adjustment option for the free travel. Servo Wave technology guarantees smooth and predictable control with the right balance of power and rigidity. Thanks to the I-Spec EV design the XTR SL-M9120 shifting levers can be mounted directly to the brake lever.

Shimano XTR BR-M9120 disc brake caliper

The Shimano XTR BR-M9120 brake caliper has a one-piece aluminium construction and ensures significantly faster response and less free travel of the entire brake system when combined with the highly rigid braking cables. In combination with the especially developed BL-M9120 brake lever the 4-piston caliper makes use of its immense potential. So the BR-M9120 offers 10 % more braking force than its predecessor. The N03A Resin or N04A Metal brake pads with cooling fins in combination with the 4-piston caliper guarantee extremely good deceleration and low weight at the same time.

Material:

lever: aluminium (painted)
master cylinder, caliper: aluminium (painted)
pistons: ceramic
hardware: titanium, aluminium