SHIFT/BRAKE LEVER

 ST-R8070

ULTEGRA Di2

ELECTRONIC SHIFT

HYDRAULIC DISC BRAKE

RIGHT

 11-SPEED

W/TL-EW02

Description

Shifting rear cable, size 1,2x2100mm, stainless steel

SHIMANO Adapter XTR SM-MA90 PM - PM +20 | black

With this adapter you can mount a 20 mm larger brake disc on the front or rear wheel. The brake mount on the fork and the frame must comply with the post mount standard!

The adapter extends the standard brake disc size of the fork or rear triangle by 20 mm. Please check your fork or rear triangle which post mount variant is installed. Based on the standard brake disc size, the adapter increases the brake disc size by the specified information in millimeters.

PM5 = 140mm standard size
PM6 = 160mm standard size
PM7 = 180mm standard size
PM8 = 200/203mm standard size


Technical specifications:

Material adapter: aluminum
Material screws: stainless steel
Extension in front: +20 mm
Rear extension: +20 mm
mount Fork: Post Mount PM
mount triangle mount: Post Mount PM
Brake mount : Post Mount PM
Color: Black

Weight according to the manufacturer: kA
Weight weighed: from 12g (adapter without screws)


Scope of delivery: 1x SHIMANO adapter XTR SM-MA90 PM - PM +20 | black incl. screws

DESCRIPTION

Shimano B03S Resin Disc Brake Pads

Shimano BL-MT200 + BR-MT200 Hydraulic Disc Brake - Postmount - Set FW

SHIMANO brake pads D02S metal

Shimano original pads with high braking performance

Compared to plastic linings, metal linings offer a higher braking effect, less wear and better temperature stability. However, they tend to generate more noise and increase wear on the brake disc. A steel carrier plate ensures optimal thermal insulation of the brake caliper.


Technical specifications:

Material covering: sintered metal
Material carrier plate: steel
Compatibility brake: Shimano XT BR-M8020 / BR-M8120, SLX BR-M7120, SAINT BR-M810 / BR-M820, ZEE BR-M640
BR-MT520, BR-MT420
Color carrier plate: copper-colored

Weight according to the manufacturer: kA
Weight weighed: 30g (pads including spring and safety pin)


Scope of delivery:

1x pair of Shimano brake pads
1x feather
1x safety pin

Shimano Deore XT M8100 - The world is your canvas.

The original MTB group continues its legacy of remaining the standard for mountainbikers everywhere. Nearly three decades in, the Deore XT brand is defined by its trail-tested durability, reliability and performance. As mountainbiking becomes faster and faster and the terrain even more technical, the M8100 series aims to give the rider the necessary feeling of confidence and safety.

Following the principle of passing on the experiences and technologies of the top series, the Deore XT incorporates the innovations of the high-end XTR components. Accordingly the new 12-speed groupset features of course Micro Spline and Hyperglide+.

Shimano Deore XT M8100 Enduro brake set consisting of the ergonomic BL-M8100 brake lever and the powerful BR-M8120 4-piston caliper. Trouble-free maintenance is provided by the proven One Way Bleeding concept and the Easy Hose Joint System which simplifies brake hose exchanges.

Shimano SM-BH90-SS Disc Brake Hose - 1700mm - black

Features - Shimano 2-Piston B05S-RX Resin Disc Brake Pads

• Pad Shape: Wide
• BR TYPE: 2-Piston
• Flexible compound
• Less noise
• Focus on controllable performance
• Designed for dry and wet conditions
• 3 type split pins included
• Successor model of B03S

Product features

• Model: B05S-RX
• Resin pads: Make less noise than sintered metal pads and offer better modulation
• Radiator Fin:  No 
• Surface form: Wide
• BR type: 2-Piston
• Modulation:  High (5 of 5)
• Performance:  Above average (4 of 5)
• Durability:  Above average (5 of 5)
• Anti-fading:  Average (3 of 5)
• Quiet:  High (5 of 5)

Compatibility

• BR-C501, BR-M575, BR-M525, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465, BR-M447, BR-M446, BR-M445, BR-M416, BR-M416A, BR-M415, BR-M4050, BR-M3050, BR-M395, BR-M375, BR-M365, BR-M355, BR-M315, BR-T675, BR-T615, BR-TX805, BR-MT500, BR-MT400, BR-MT200, BR-UR300

material

• Compound: Resin (organic)
• Plate: Steel

H03C Metal Ice-Tec Disc Brake Pads

The Shimano H03C metal brake pad with radiator fin for SAINT BR-M820, ZEE BR-M640 and XT BR-M8020 disc brake.

Pair of genuine Shimano replacement pads contains 1 pair disc brake pads Shimano H03C incl. spring and split pin

Alloy and Steel back plate using Ice-Tec heat radiation cooling fins with metal sintered braking compound

• Metal pads: Consistently perform well in dry or wet conditions, and have excellent power and durability
• Radiator fin: Provides long pad life and less fade by cooling technology

Shimano Disc Brake Pads - D03S-RX | Resin

• Material: [base plate] stainless steel, [cooling fins] aluminum, [pad] metallic
• Compatibility: Shimano XTR BR-M9000, Shimano XTR BR-M9020, Shimano XTR BR-M987, Shimano XTR BR-M985, Shimano Deore XT BR-M785, Shimano SLX BR-M675, Shimano Deore BR-M615, Shimano BR-RS785
• Recommended Use: mountain bike

SHIMANO Center Lock RT-MT800 brake disc | 160mm IceTech FREEZA | with magnetic locking ring for EW-SS302

With the Ice-Tech cooling technology, the RT-MT800 brake disc ensures constant braking performance even on longer descents. The brake disc is characterized by a three-layer sandwich construction. The stainless steel flanks with an aluminum core offer significantly improved heat dissipation. This allows the temperature to be reduced by around 100 °C.
In addition, the FREEZA aluminum cooling fins reduce the system temperature by around a further 50 °C thanks to their increased surface area. Due to the higher heat dissipation, smaller brake discs than usual can be installed. In addition, the service life of the brake pad is significantly extended.
As is typical for Shimano, the discs are suitable for the center lock mount , which enables quick and easy installation, offers a secure hold and ensures a clean and compact look. A lighter aluminum carrier saves a few grams of weight compared to the previous version.
The magnet integrated in the lockring serves as a signal pickup for the Shimano Steps EW-SS302 speed sensor.


Technical specifications:

Material braking surface: stainless steel
Material spider: aluminum
Execution: two-piece
Disc mount: Center Lock
Diameter: 160mm
Thickness: 1.75mm
Friction ring width: 13.5 mm
recommended brake pads: resin or metal
Technology/Features: ICE TECHNOLOGIES, ICE TECHNOLOGIES FREEZA
Color: silver, black

Weight according to the manufacturer: brake disc - 108g
Weighed the weight myself: brake disc - 110g, lockring - 11g


Scope of delivery:

1x SHIMANO Center Lock RT-MT800 brake disc | 160mm IceTech FREEZA
1x center lock ring with integrated magnet | internal tool holder

DISC BRAKE J-kit DIRECT 105

ST-R7120(L)

 BRR7170(F)

 FOR 160MM ROTOR

 RESIN PAD(W/FIN) SL INNER 1800MM

 SM-BH90 1000MM

OT-SP41 600MM

IND.PACK

DISC BRAKE J-kit DIRECT 105

ST-R7120(R)

BRR7170(R)

W/O ADAPTER 25MM MNT

RESIN(W/FIN)

INNER 2200MM

SM-BH90

1700MM 

OT-SP41 600

OT-RS900 240MM&NOSE

CAPX1

IND.PACK

SHIMANO brake pads G05S Resin without cooling fins

Shimano original synthetic resin pads with high braking performance for maximum power on your Shimano disc brakes. Synthetic resin pads offer reduced noise when braking in both dry and wet conditions. Since even materials research cannot outsmart physics, there is of course a disadvantage - the wear of the resin-based pads is higher and the temperature stability is also limited, but the service life of your brake discs normally increases. However, the synthetic pad has been improved, making the G05S-RX brake pads 50% more durable than their predecessor.
If you need more braking power, then we recommend the corresponding Shimano metal brake pads.

Resin - never heard of what is that? Quite simply, translated literally from English, it means resin. Here in connection with brake pads, of course, a synthetic resin (or synthetic resin).

NOTE: The G05S Resin Pads are the successor model to the G03S Resin Pads and are compatible with the same disc brake models as the previous version.

Technical specifications:

Material coverings: Resin - synthetic resin (organic)
Material carrier plate: stainless steel
Compatibility brake: Shimano BR-M9000, BR-M9020, BR-M987, BR-M985, BR-M8100, BR-M8000, BR-M785, BR-M7100, BR-M7000, BR-M675, BR-M666 series brakes , BR-M6100, BR-M6000, BR-M615, BR-S7000,BR-S700, BR-CX77, BR-RS785,BR-R785, BR-R517, BR-R317

Weight according to the manufacturer: kA
Weight weighed: 21g (coverings including spring and cotter pin)

Shimano RT-CL800 Disc Brake Rotor - Centerlock | Ice-Tech Freeza - black/silver

SHIMANO Brake Disc Center Lock RT-MT900 | 140 mm IceTech FREEZA

With the Ice-Tech cooling technology, the RT-MT900 brake disc ensures constant braking performance even on longer descents. The brake disc is characterized by a three-layer sandwich construction. The stainless steel flanks with an aluminum core offer significantly improved heat dissipation. This allows the temperature to be reduced by around 100 ° C.
In addition, the FREEZA aluminum cooling fins reduce the system temperature by approx. Another 50 ° C due to their enlarged surface. Due to the higher heat dissipation, smaller brake discs can be installed than usual. In addition, the service life of the brake lining is significantly extended.
As is typical for Shimano, the discs are suitable for the center lock mount , which enables quick and easy assembly, offers a secure hold and ensures a clean and compact look. A lighter aluminum carrier saves a few grams of weight compared to the previous version.


Technical specifications:

Brake surface material: stainless steel
Material spider: aluminum
Execution: two-part
Disc mount: Center Lock
Diameter: 140 mm
Thickness: 1.75mm
Friction ring width: 13.5 mm
Recommended brake pads: resin or metal
Technology / Features: ICE TECHNOLOGIES, ICE TECHNOLOGIES FREEZA
Color: silver, black

Weight according to the manufacturer: 88g
Weight weighed: 95.3g (including center lock ring)


Scope of delivery:

1x SHIMANO brake disc Center Lock RT-MT900 | 140 mm IceTech FREEZA
1x center lock ring with internal tool holder

Shimano Disc Brake Pads - G04S-MX | Metal

DESCRIPTION

Shimano Dura Ace/Ultegra/105 Brake Hose SM-BH90-JK-SSR

This Shimano SM-BH90-SBM-A brake hose comes with a black banjo

Technical Information:

Compatibility:

Manufacturer Part Numbers:

Contents:

Shimano Ultegra Di2 ST-R8170 STI brake/shift lever

The ST-R8170 STI levers are not only characterised by their optimised ergonomics and even more precise dosing of the hydraulic disc brakes, but also impress above all with lightning-fast shifting processes, which are achieved not least through the Wireless functionality.

The wireless connection also offers another advantage: without electric cables, installation is easier and the cockpit appears tidier. Nevertheless, the shift/brake levers still offer a cable connection (EW-SD300) for the use of additional shifters in the drops or the top of the handlebar. For numerous customisation and configuration options, compatibility with the improved E-Tube Project app, which, like previous versions, allows you to adjust shift modes (Synchro-/Semi-Synchro-Shift, Multi-Shift), shift speed and button assignment on the fly.

To ensure that the braking performance is in no way inferior to the shifting functionality, the Ultegra Dual Control levers feature Servowave technology. With the help of an extended brake control range, this ensures excellent dosing that offers optimum comfort and control even in challenging conditions. Of course, for individual adjustment, the levers feature the option of reach and free stroke adjustment.

Shimano Ultegra BR-R8170 disc brake caliper

All around improved, the Shimano Ultegra BR-R8170 caliper offers optimised dosing, quieter braking performance and extremely simplified maintenance.

While a faster-gripping initial braking force always gives the feeling of full control, the 10 % increase in brake pad spacing allows for a significant reduction in noise during braking, despite a flatter overall construction. In addition, when the RT-MT900 brake disc rotor (sold separately) is used, its deformation-resistant design, even with increasing heat, helps to create an extremely quiet and smooth braking system.

To simplify maintenance, the hydraulic 2-piston brake caliper not only features the proven One-Way-Bleeding system, but also a separate arrangement of bleed nipple and opening screw. On the one hand, this minimises the risk of the bleed kit hose slipping off when opening or closing the system and, on the other hand, makes it unnecessary to dismantle the caliper from the frame for bleeding process.