The TT/Triathlon Dual Control Lever ST-R8060 allow the rider to change gears and operate the brakes when using the TT/Triathlon extensions.
All Products
2926 products
2926 products
CERAMICSPEED SINGLE BEARING 61903C
Regular price OMR 70
Shipping calculated at checkout.
All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
CERAMICSPEED SINGLE BEARING 61803C
Regular price OMR 60
Shipping calculated at checkout.
All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
CERAMICSPEED BSA SRAM DUB 28.9 BLACK C
Regular price OMR 175
Shipping calculated at checkout.
The CeramicSpeed BSA SRAM DUB Road bottom bracket for the installation of DUB cranks in a BSA frame with 68 mm bottom bracket width is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.
Type: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
Technical Information:
Bearings: ceramicCompatibility:
- SRAM DUB cranksFeatures:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
CERAMICSPEED BSA 68mm SHIMANO RD BLACK C
Regular price OMR 185
Shipping calculated at checkout.
CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster.
Type: BSA
Shell Width: 68 mm
Axle Diameter: 24 mm (Hollowtech II)
- FSA cranks with a 24 mm axle
- Rotor cranks with a 24 mm axle
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: BSA
Shell Width: 68 mm
Axle Diameter: 24 mm (Hollowtech II)
Technical Information:
Bearings: 61805 ceramicCompatibility:
- Shimano Hollowtech II cranks- FSA cranks with a 24 mm axle
- Rotor cranks with a 24 mm axle
Features:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
CERAMICSPEED BSA SRAM DUB 28.9
Regular price OMR 130
Shipping calculated at checkout.
The CeramicSpeed BSA SRAM DUB Road bottom bracket for the installation of DUB cranks in a BSA frame with 68 mm bottom bracket width is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.
Type: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
Technical Information:
Bearings: ceramicCompatibility:
- SRAM DUB cranksFeatures:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
SHIMANO XTR BR-M9000 BRAKE CALIPER
Regular price OMR 65
Shipping calculated at checkout.
Shimano XTR brake calliper BR-M9000 Race Postmount
The 2014 new XTR brake calliper BR-M9000 for demanding race intended uses. Two parts bolted and forged aluminum. Improved controllability, less heat generation and optimized ergonomics guarantee seamless reactions and safe braking in any intended use.
The M9000 has a caliper braking force that is tailored to the uncompromising racing use and which offers a lower overall weight, which, fixing screws made of titanium and brake pads with aluminum beams is achieved by a brake caliper of magnesium.
technical details:
Mounting: Postmount
Material caliper: Magnesium
Material Piston: High Insulation Resin
Brake pads: G02A Resin
Color: silver / anthracite
Number of pistons: 2
Weight: 91g (incl. Brake pads)
Delivery: 1 caliper with pads G02A
The 2014 new XTR brake calliper BR-M9000 for demanding race intended uses. Two parts bolted and forged aluminum. Improved controllability, less heat generation and optimized ergonomics guarantee seamless reactions and safe braking in any intended use.
The M9000 has a caliper braking force that is tailored to the uncompromising racing use and which offers a lower overall weight, which, fixing screws made of titanium and brake pads with aluminum beams is achieved by a brake caliper of magnesium.
- Extremely rigid, double bolt caliper
- Standard with ICE-TECH brake pads
- In combination with the proven ICE TECH Freeza Disc outstanding braking performance
technical details:
Mounting: Postmount
Material caliper: Magnesium
Material Piston: High Insulation Resin
Brake pads: G02A Resin
Color: silver / anthracite
Number of pistons: 2
Weight: 91g (incl. Brake pads)
Delivery: 1 caliper with pads G02A
PARKTOOL AXLE AND SPINDLE VISE INSERTS AV-5 WORKSHOP
Regular price OMR 22
Shipping calculated at checkout.
- Top retainer legs and magnets hold the inserts securely in place during bench vise use
- 5, 9, 10, 12, 14, 20, 25, 30, and 36mm jaw openings
- Includes jaw opening for safely holding hydraulic tubing
- Mini V-block
- 1" hex, compatible with Park Tool Freewheel Removers (FR-1, FR-2, etc.)
BBB BOTTLECAGE BRACKET UNIHOLD BBC 95
Regular price OMR 15
Shipping calculated at checkout.
BBB Holder UniHold adapter for bottle cage BBC-95
Universal seat post and handlebar clamp made of aluminum.
Can be used to attach a bottle cage.
Technical specifications:
Material: aluminum, plastic
Dimensions: 22.2-25.4 mm and 25.4-31.8 mm
Color: Black
Weight according to manufacturer: n / a
Weight weighed: 40g
Delivery: 1x BBB holder UniHold adapter for bottle holder BBC-95
Universal seat post and handlebar clamp made of aluminum.
Can be used to attach a bottle cage.
Technical specifications:
Material: aluminum, plastic
Dimensions: 22.2-25.4 mm and 25.4-31.8 mm
Color: Black
Weight according to manufacturer: n / a
Weight weighed: 40g
Delivery: 1x BBB holder UniHold adapter for bottle holder BBC-95
SCOTT BIG JON FAT BIKE (L)
Regular price OMR 750 Sale price OMR 540 Save OMR 210
Shipping calculated at checkout.
Scott Big Jon Bike - Specifications
|
Frame, shock absorption
|
|
|---|---|
| Fork | Rigid Alloy15x150mm QR axle |
| Frame | Big Jon Alloy 6061 Custom Butted Tubing Tapered HT / BB100 / 4.8 "Tire clearance 197x12mm Dropout |
| Frame material | Aluminum |
| Carriage | Race Face BSA 100mm |
|
Wheels
|
|
| Spokes | Stainless Black 15G / 1.8mm |
| Rear bushing | Syncros CT197 / 197x12mm QR axle / made by Formula |
| Front bushing | Syncros CT150 / 15x150mm made by Formula |
| Wheel size | 26 "(Fatbike) |
| Tires | Schwalbe Jumbo Jim EVO / 4.8x26 127EPI Kevlar Bead / Lite Skin PaceStar compound / Schwalbe EVO Tubes 13JE |
| Rims | Syncros with CNC holes / 32H 80mm wide |
|
Braking
|
|
| Brake type | Disk (hydraulic) |
| Brakes | Shimano M396 Disc 180 / F and 160 / Rmm SM-RT30 CL Rotor |
|
Transmission
|
|
| Number of speeds | 20 |
| Shifters / Shifters | Shimano Deore SL-M610 / Rapidfire plus 2 way release / w / gear indicator |
| System / Cranks | Race Face RXC Double 36x22 T / Chainline 74.8mm |
| Front derailleur | Shimano Deore FD-M618-D |
| Rear derailleur | Shimano SLX RD-M7000-10 SGS Shadow Type / 20 Speed |
| Cassette | Shimano CS-HG50-10 / 11-36 T |
| Chain | KMC X10 |
|
Steering wheel
|
|
| Steering column | Syncros OE Press Fit / Tapered 1.5 "- 1 1/8" OD 50 / 61mm / ID 44 / 55mm |
| Takeaway | Syncros 6061 Alloy oversize 31.8mm / 1 1/8 "/ 6 ° angle |
| Steering wheel | Syncros FL2.0 mini Riser / Alloy 6061 DB 12mm rise / 9 ° / 740mm |
|
Saddle
|
|
| Seat post | Syncros / 31.6x400mm |
| Saddle | Syncros XM2.5 |
SCHWALBE KID PLUS
Regular price OMR 10
Shipping calculated at checkout.
Application: City & Touring
Product Line: Active Line
Type: wired tyre
Tubeless System: none
Tread: HS 413
Carcass: 50 tpi
Sidewall: TwinSkin
Puncture Protection: PunctureGuard
Product Line: Active Line
Type: wired tyre
Tubeless System: none
Technical Information:
Rubber Compound: Black 'n' RollTread: HS 413
Carcass: 50 tpi
Sidewall: TwinSkin
Puncture Protection: PunctureGuard
GIANT SLR 2 42 RB HOOKLESS FW
Regular price OMR 185
Shipping calculated at checkout.
Shimano Tiagra FC-4700 Crankset - 10S - 36/52
Regular price OMR 60
Shipping calculated at checkout.
The redesigned Shimano Tiagra FC-4700 crankset combines weight and efficiency without sacrificing stiffness. It is available in 53-39, 52-36, 50-34 tines and new chainring options 48-34 tines and crank lengths of 165, 170, 172.5 and 175 mm.
Highlights
- Optimal power transfer motivates cyclists to pedal further and faster
- Optimal balance between stiffness and lightness
- Reinforced 4-arm construction
- Centre distance: 110 mm
- Sprocket shape optimized for the HG-X chain
- Additional chainring combination: 48-34 teeth
- Chainring combination: 50-34 tines, 52-36 tines, 53-39 tines, 48-34 tines
- Sprocket combinations for adapting to a wider range of driving styles
- Crank length: 165, 170, 172.5, 175 mm
Road Crankset :
name product : Tiagra – FC4700
manufacturer : Shimano
weight :
material : Aluminium
arm size : Type : 170/172.5/175
fit chainring : 52-36
fit derailleur : double
fit chain : 10 s
axle version: External cup :« 2-piece crank construction » : BB-RS500 / Pressfit : BB-RS500-PB
SHIMANO DURACE RD-R9100 SS 11-SPEED
Regular price OMR 95
Shipping calculated at checkout.
Product description Shimano Dura Ace RD-R9100
Rear Derailleur, Rd-R9100, Dura-Ace, Ss 11-Speed, Shadow Design, Direct Attachment, W|Ot-Rs900(Black) 240Mm X1, Long Nose Cap X1, Ind.Pack.
For 2x10V systems.
Compatible with cassettes 11-42T.
Shimano Dura Ace RD-R9100 is perfect to complete your bike gear. In our online store bikeinn, you can profit from the multitude of advantages and if you place your order right away at bikeinn, you will receive it in a few days at home. In addition, in our online bike store you can find other bike products that complement Shimano Dura Ace RD-R9100.
100% R-CORE PANTS
Regular price OMR 60 Sale price OMR 30 Save OMR 30
Shipping calculated at checkout.
Crafted from durable, yet lightweight materials, the R-Core gear is ideal for both DH and BMX riding and exceeds the demands of the toughest critics on the track and trails.
- Polyester 600D construction for ultimate durability
- Stretch-mesh venting increases airflow and motion
- Laser inseam perforation for enhanced venting
- Internal mesh lining provides additional comfort
- Adjustable ladder closure for the perfect fit
- Zippered pockets for security of essentials
- Bonded pedal/drivetrain protection on calf
- TPR back tab for pulling or hanging ease
- Rear stretch panel for uncompromising mobility while riding
THULE EASYBASE TH-949008
Regular price OMR 165
Shipping calculated at checkout.
Product description Thule Rear Carrier Easy Base 949
Every single product of the brand THULE, sticks strictly to the homologation standards following the regulations of each country whether is European or American.
The company THULE has been making products since 1942, under strict quality controls and according to the law in each country where these products are distributed.
The flexible four-in-one transport solution.
Features:
- Expands with Thule EasyBase accessories for either bike transport (EasyBike), a hard-shell box (BackUp), a soft and waterproof bag (EasyBag) or a metal basket (EasyBasket).
- Patented coupling fits all types of tow bars, and needs no adjustment.
- U-bar easily folds down for easy storage.
- Load capacity 45 kg.
Specifications:
- Load capacity : 45 kg
- Length ; 120 cm
- Width : 60 cm
- Weight: 14.4 kg
- Fits frame dimensions: 20-70 mm with Thule EasyBike
BONTRAGER EVOKE RL WOMENS SADDLE BLACK
Regular price OMR 45
Shipping calculated at checkout.
Performance Posture 3 for pelvic rotation with a balance of comfort and efficiency. The Women-Specific Design is engineered to yield better fit and comfort for women. The Contour Relief Zone (CRZ) recessed saddle cavity eases pressure on soft tissue. Size-Specific Curvature ensures that each saddle is designed specific to its width. The multi-zone density padding is strategically placed for optimal comfort and performance. The carbon fibre-reinforced shell strikes a balance between strength and a light weight. The abrasion-resistant material is durable at vulnerable spots for increased saddle life.
POWER CABLE FOR SM-BCR1, SM-BCC1-6 DURA-ACE Di2, ULTEGRA Di2, ALFINE Di2, 240V, FOR UK, (TYPE-BF), IND.PACK
Regular price OMR 6
Shipping calculated at checkout.
Shimano SM-BCC1-6 UK Power Cord for Di2 Charger SM-BCR1 & EC-E6002
Shimano SM-BCC1-6 UK power cord with Europlug for Shimano's SM-BCR1 battery charger (no box packaging).
Product features - Power Cord UK SM-BCC1-6
- Voltage: 230/240 Volt
- Plug type/region: UK (Type BF)
- Length: 1m
Compatibility
- Di2 Battery Charger SM-BCR1
![TACX T1709 TRAINER ADAPTER (SILVER) [12MM]](http://muscatbike.com/cdn/shop/products/image_8f7459aa-9431-49b1-a9a7-80b877ea4ecd_{width}x.jpg?v=1593346195)
![TACX TRAINER AXLE T1706 FOR E-THRU [10MM]](http://muscatbike.com/cdn/shop/products/image_1ca86f91-687e-442f-abe1-633e39a11b0e_{width}x.jpg?v=1593346612)
