3 products
POLYGON COLLOSUS N7
Regular price OMR 1,150 Save OMR -1,150FRAME AND FEATURES
Polygon uses a 6061 ALX hydroformed and triple-butted aluminum frame on the Collosus lineup. Internal cable routing is secured at the ports to help prevent rattle, keeping this alloy steed looking clean. The derailleur cable leaves the front triangle, entering the driveside chainstay before exiting just before the rear axle. On the non-driveside, the brake hose is left exposed but secured and tucked nicely behind the chainstay, maintaining the clean aesthetic Polygon was going for.
The N7 also has downtube frame protection features, with a shuttle pad near the headtube and a bash guard near the bottom bracket. The chainstay has a guard to protect the tubing and keep chain rattle on the quieter side. Frames come in four sizes, from small to X-large, and the color is velvet cake red.
SUSPENSION
For the Collosus, Polygon switched things up from the suspension platform found on their Siskiu bikes. Independent Floating Suspension (IFS) is Polygon’s six-bar suspension design, found on these big rigs. Predictability is the goal for IFS as the N7 goes through all 170mm of its travel while also focusing on pedal and braking forces, pedaling efficiency, and wheel path control.
GEOMETRY
A slack 63.5° headtube is paired with a reasonably upright 77° seat tube to keep the rider in a comfortable pedaling position. The N7 has a BB height of 353mm, with a drop of 27mm, and chainstays are consistent across all sizes at a compact 435mm for its 29” wheel.
Reach increases a steady 20mm across frame sizes, starting at 440mm on a size small and topping off at an even 500mm on an X-large. Our size large on test has a reach of 480mm. The wheelbase on a large is 1266mm. Frame Stack jumps up from 621.9mm on a small to 639.8mm on the X-large, with our size large’s stack measuring 634.1mm.
BUILD SPECS
Polygon does a decent job of balancing overall price and value. For suspension, a base-model Rockshox Zeb is paired with a Rockshox Super Delux Select +, both set at 170mm of travel. Shimano takes care of most of the 12-speed drivetrain, with a Deore M6100 derailleur and shifter. Shimano MT150 cranks and 32T chainring work with a Sunrace CSMZ800 11-51t cassette and a KMC X12 chain to keep the N7 rolling.
Tektro is in charge of stopping the Collosus N7, with 4-piston/2-piston caliper front and rear HD-M735 brakes and 203mm rotors. A WTB Volt saddle sits on top of a TranzX dropper post, with 170mm of travel for large and X-large, and 150mm for small and medium. Aside from the Vee Flow Snap 2.6 tires, most other components are Entity, Polygon’s in-house brand. This includes the 32-hole and 35mm inner width Entity wheelset, 35mm stem, and 780mm handlebars. Total bike weight tipped the scales at 39.1lbs/17.7kg for our size Large.
POLYGON SYNCLINE C3 MTB
Regular price OMR 580 Save OMR -580Build Specs
Kit |
SYNCLINE C5
|
SYNCLINE C3
|
SYNCLINE C2
|
---|---|---|---|
Frame | ACX XC PERFORMANCE | ACX XC PERFORMANCE | ACX XC PERFORMANCE |
Fork | FOX 32 RHYTHM, 120mm | ROCKSHOX RECON SILVER RL, 120mm | SUNTOUR XCR 32 LO-R, 120mm TRAVEL |
Shifter | SHIMANO SLX SL-M7100-R 12-SPEED TRIGGER | SHIMANO DEORE SL-M6100-R 12-SPEED TRIGGER | SHIMANO DEORE SL-M5100, 1x11 SPEED |
Crank Set | SHIMANO SLX FC-M7100-1 32T 2-PIECE-CRANK | SHIMANO FC-MT510-1 32T 2-PIECE-CRANK | SHIMANO DEORE FC-M5100 32T |
Cassette | 12 SPEED 11-51T | 12 SPEED 11-51T | 11 Speed 11-51T |
Rear Derailleur | SHIMANO SLX RD-M7100-SGS DIRECT ATTACH | SHIMANO DEORE RD-M6100-SGS DIRECT ATTACH | SHIMANO DEORE RD-M5100 |
Wheel Set | ALLOY DOUBLE WALL | ALLOY DOUBLE WALL | ALLOY DOUBLE WALL 32H |
Tire | WTB TRAIL BOSS TIRE, 27.5x2.25 / 29x2.25 | WTB TRAIL BOSS TIRE, 27.5x2.25 / 29x2.25 | WTB TRAIL BOSS 27.5"x2.25" / 29"x2.25" |
Brake Lever | SHIMANO MT400 HYDRAULIC DISC BRAKE | SHIMANO BL-MT201 | SHIMANO MT200 HYDRAULIC DISC BRAKE |
Brake Caliper | SHIMANO MT400 HYDRAULIC DISC BRAKE | SHIMANO BR-MT201 | SHIMANO MT200 HYDRAULIC DISC BRAKE |
Rotor | FRONT:180mm REAR:160mm CENTER-LOCK | SHIMANO SM-RT10 F:180mm R:160MM CENTERL LOCK | FRONT:180mm REAR:160mm CENTER-LOCK |
CANNONDALE HABIT HT 3 - JADE
Regular price OMR 550 Save OMR -550What You Need
Full-tilt-boogie trail capability meets hardtail purity and simplicity. That's the beauty of Habit HT. Minimum fuss. Maximum fun.
Where it thrives
Trails of all kinds
What it's built for
Good times in the dirt
Highlights
- Light, durable SmartForm C2 Alloy frame / SR Suntour XCR LO Boost fork
- Wide range microSHIFT Advent X 10-speed shifting / Shimano MT200 hydraulic disc brakes
- Fast rolling WTB Breakout / Trail Boss tires / TranzX dropper post
Details
-
Platform
-
Model NameHabit HT 3
-
Model CodeC26302U
Frameset
-
FrameHabit HT, SmartForm C2 Alloy, tapered headtube, post mount disc, StraightShot internal cable routing, dropper post compatible, BSA 73, 12mm thru axle, Boost 148, 55mm chainline, UDH hanger.
-
ForkSR Suntour XCR LO Boost 29, 130mm travel, 15mm thru axle, tapered alloy steerer
-
HeadsetIntegrated Sealed Bearing, Tapered
Drivetrain
-
Rear DerailleurmicroSHIFT Advent X
-
ShiftersmicroSHIFT Advent X, 10-Speed
-
ChainKMC X10, 10-speed
-
CrankProwheel, 30T, 55mm chainline
-
Rear CogsmicroSHIFT Advent X H-Series, 11-48, 10-speed
-
Bottom BracketProWheel BSA 73
Brakes
-
BrakesShimano MT200 hydraulic disc, 180/180mm RT10 rotors
-
Brake LeversShimano MT200 hydraulic disc
Wheels
-
RimsWTB STX i25 TCS, 32h, tubeless ready
-
SpokesStainless Steel, 14g
-
Tire Size2.3
-
Wheel Size29
-
Hubs(F) Shimano MT400, 15x110mm thru-axle / (R) Shimano MT400, 12x148mm thru-axle
-
Tires(F) WTB Breakout, 29x2.3", Comp / (R) WTB Trail Boss, 29x2.25" Comp
-
Front TireWTB Breakout, 29x2.3", Comp
-
Rear TireWTB Trail Boss, 29x2.25" Comp
Components
-
HandlebarCannondale 3 Riser, 6061 Alloy, 15mm rise, 8° sweep, 4° rise, 780mm
-
StemCannondale 3, 6061 Alloy, 31.8, 0°
-
GripsCannondale Locking Grips
-
SaddleCannondale Ergo XC
-
SeatpostTranzX dropper, internal routing, 31.6, 100mm (S), 120mm (M), 130mm (L-XL)