42 products
42 products
CERAMIC SPEED BB86 BOTTOM BRACKET FOR SRAM DUB ROAD COATED BLACK PF41X86
Regular price OMR 180
Shipping calculated at checkout.
The CeramicSpeed BB86 SRAM DUB Road bottom bracket for the installation of DUB cranks in a Pressfit frame with 86.5 mm bottom bracket width and 41 mm shell diameter is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.
Type: Pressfit BB86
Shell Diameter: 41 mm
Shell Width: 86.5 mm
Axle Diameter: 28.99 mm (DUB)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: Pressfit BB86
Shell Diameter: 41 mm
Shell Width: 86.5 mm
Axle Diameter: 28.99 mm (DUB)
Technical Information:
Bearings: ceramicCompatibility:
- SRAM DUB cranksFeatures:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
CERAMIC SPEED UFO CHAIN SRAM AXS CHAIN 12SPEED
Regular price OMR 68
Shipping calculated at checkout.
UFO Chain SRAM AXS 12s
Due to its unique optimisation treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimised by hand in Denmark.
This ultrafast chain has been optimised for SRAM AXS Road 12-speed compatibility, to boost the efficiency of your entire drivetrain.
CeramicSpeed UFO Racing Chains can save you between 2–5 watts on a distance of 650 km/400 miles. Apply CeramicSpeed UFO Drip after 650km to maintain your peak chain optimization over the life of the chain.
Be aware that the UFO treatment is not optimised for wet and muddy conditions, which might cause corrosion on the chain. Read more about this in the maintenance tab.
View test data here.
In The Box
- 114 link SRAM Force Flattop Optimized Chain
- Quick Link
- Disposable Gloves
- Sticker Sheet
- Single-use UFO Drip Sample
CERAMICSPEED BSA SRAM DUB 28.9
Regular price OMR 130
Shipping calculated at checkout.
The CeramicSpeed BSA SRAM DUB Road bottom bracket for the installation of DUB cranks in a BSA frame with 68 mm bottom bracket width is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.
Type: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
Technical Information:
Bearings: ceramicCompatibility:
- SRAM DUB cranksFeatures:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
CERAMICSPEED BSA SRAM DUB 28.9 BLACK C
Regular price OMR 175
Shipping calculated at checkout.
The CeramicSpeed BSA SRAM DUB Road bottom bracket for the installation of DUB cranks in a BSA frame with 68 mm bottom bracket width is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.
Type: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
Technical Information:
Bearings: ceramicCompatibility:
- SRAM DUB cranksFeatures:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
CERAMICSPEED SINGLE BEARING 61803C
Regular price OMR 60
Shipping calculated at checkout.
All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
CERAMICSPEED SINGLE BEARING 61903C
Regular price OMR 70
Shipping calculated at checkout.
All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
KMC DLC CHAIN 11 SPEED BLACK BC
Regular price OMR 65
Shipping calculated at checkout.
Perfect shifting characteristics combined with light weight: the DLC 11 Chain by KMC
World-class riders prove it again and again: KMC chains have the right DNA for champions! KMC derailleur chains are compatible with all common derailleur groups. Long service life, perfect shifting characteristics and easy installation via master link.Specifications:
Application: All Mountain, Road, City & TouringGearing: 11-speed
Technical Information:
Number of Links: 116Closure Type: MissingLink 11 CL550 (not reusable)
Size: 1/2" x 11/128"
Pin Length: 5.5 mm
Material: Steel
Features:
- Triple X-Durability- Diamond Like Coating
- hollow bolts, weight-reduced inner and outer plates
Technology:
DLCDLC stands for " Diamond Like Coating" . The titanium carbon nitride coating reduces friction and thus contributes to the smooth running of the chain and optimal shifting behaviour.
The extremely hard surface ensures long-lasting, consistent function and appearance and above-average durability.
Super Light
Hollow pins and weight-reduced inner and outer plates reduce the weight of a chain link to 2.08 grams. As a result, the KMC DLC 10 weighs just 247 grams with 118 links.
X-Bridge
The precisely defined angles of the KMC Double X Bridge, together with specially chamfered inner and outer plates, ensure perfect interaction between the drive components. The result: fast and smooth shifting.
Manufacturer's Guarantee:
For chains with the " Durability Warranty" seal of quality, KMC guarantees that they will last longer than comparable chains from other brands. Learn more about warranty terms and conditions here.
KMC X11 CHAIN EPT ANTI RUST 11 SPEED SILVER
Regular price OMR 18
Shipping calculated at checkout.
Durable and powerful: the X11 Chain by KMC
With the KMC X11 chain you get a very durable, non-directional chain for Shimano, SRAM and Campagnolo 11-speed drivetrain systems. Double X Bridge ensures particularly high performance. A reusable Missing Link master link is included.
Specifications:
- Application:
- Road, Cross Country, Gravel, Cyclocross
- Gearing:
- 11-speed
Technical Information:
- Number of Links:
- 114, 118
- Closure Type:
- master link (MissingLink)
- Size:
- 1/2" x 11/128"
- Pin Length:
- 5.65 mm
- Directional:
- no
- Recommended Groupset:
- Shimano, Campagnolo and SRAM 11-speed drivetrains
- Material:
- steel
Features:
- 3 out of 5 points on the durability scale
- Hi-Performance
- Elongated Double X Bridge
- black with nickel-plated outer lugs
SHIMANO 105 FC-R7000 CHAINWHEEL FOR 11 SPEED W/O BB IND PACK ST
Regular price OMR 75
Shipping calculated at checkout.
Product features - 105 FC-R7000 2x11-speed Crank
- Use: Road
- Group: 105
- Model: FC-R7000
- Gradation: 52-36T/ 50-34T
- Q-Factor: 146mm
- Threaded BB shell width: 68 / 70mm
- Gear front: 2-speed
- Gear rear: 11-speed
- Construction: Hollowtech II
- Compatible Chain: HG-EV 11-speed, HG-X 11-speed
- PCD: 110mm
- Chain line: 43.5mm
SHIMANO BICYCLE CHAIN CN-HG601 11-SPEED
Regular price OMR 15
Shipping calculated at checkout.
DESCRIPTION
Item specifics
Condition:
Component Type:
Drive
Component Sub-Type:
Chain
EAN:
4524667906773
Brand:
Shimano
Compatible Bike Type:
Universal, Tandem Bike, Cyclocross Bike, Electric Bike, Trekking Bike, Mountain Bike
MPN:
CN-HG601-11
Material:
Aluminium
Number of Speeds:
11 Speed
Colour:
Silver
Part Type:
Chain
About this product
Product Identifiers
Brand
Shimano
MPN
CN-HG601-11
EAN
4524667906773
GTIN
4524667906773
eBay Product ID (ePID)
1364834040
Product Key Features
Number of Speeds
11 Speed
Colour
Silver
Part Type
Chain
Material
Aluminium
Compatible Bike Type
Universal, Tandem Bike, Cyclocross Bike, Electric Bike, Trekking Bike, Mountain Bike
Dimensions
Weight
257 g
SHIMANO C-HG40 CHAIN 8-SPEED ST
Regular price OMR 9
Shipping calculated at checkout.
Features:
- Hyper Glide (HG) technology has chamfered inner plates to optimise shifting performance on HG sprockets
- Mushrooming of the pins gives unsurpassed side-plate retention, enabling the chain to far exceed the BS/ISO standard for breaking force
- 7.3mm chain width optimised for 7- and 8-speed HG drivetrains
- 116 links
- Use: Road/Mountain Bike (MTB)
- Weight: 335 grams
SHIMANO CN-HG701-11 CHAIN ST
Regular price OMR 20
Shipping calculated at checkout.
Product features
- Use: Road, MTB, E-Bike
- Model: CS-HG701-11
- Group: Ultegra, XT, STEPS E8000, STEPS E6000
- Gear: 11-speed
- Type: HG-X11
- Directional design: Yes
- Chromizing Treatment Link Pin: Yes
- Pin Link Plate: SIL-TEC
- Roller Link Plate: SIL-TEC
- Connector: Quick-Link SM-CN900-11
SHIMANO CN-HG901-CHAIN 116 LINKS 11SPEED BC
Regular price OMR 30
Shipping calculated at checkout.
Product features
- Use: Road, MTB, E-Bike
- Model: CS-HG901
- Group: Dura Ace, XTR
- Gear: 11-speed
- Type: HG-X11
- Directional design: Yes
- Hollow Pin: Yes
- Pin Link Plate: SIL-TEC
- Roller Link Plate: SIL-TEC
- Connector: Quick-Link SM-CN900-11
SHIMANO CN-HG95 CHAIN ST
Regular price OMR 15
Shipping calculated at checkout.
Product Features - Shimano XT CN-HG95
- Use: MTB, Trekking, E-Bike
- Model: CN-HG95
- Group: XT Dyna-Sys
- Type: HG-X 10-speed super narrow
- Directional design: Yes
- Chromizing Treatment Link Pin: Yes
- Pin Link Plate: SIL-TEC
- Roller Link Plate: SIL-TEC
- Connector: Connecting Pin
SHIMANO CN-LG500 CHAIN 9/10/11SPEED
Regular price OMR 10
Shipping calculated at checkout.
The CN-LG500 is the first choice when it comes to the right chain for Shimano 9-speed, 10-speed and 11-speed Linkglide drivetrains. It has been designed to offer smooth and defined gear changes in combination with these components, which have been specially developed for e-bikes and punishing applications in the trekking and MTB sector. However, it can also be combined with Hyperglide drives and thus also scores points with road or gravel bikers with its reliable, long-lasting function. The CN-LG500 chain is held together with a chain lock, which simplifies assembly.
SHIMANO CN-M8100 CHAIN
Regular price OMR 26
Shipping calculated at checkout.
Shimano XT CN-M8100 12-speed Chain with Quick-Link
The special design of the new Shimano XT CN-M8100 12-speed chain ensures improved shifting performance and smoother running - even in rough terrain. The SM-CN910-12 Quick-Link closure, which is also new, makes installation easy.
Features - Shimano XT CN-M8100 12-speed Chain with Quick-Link SM-CN910-12
- New Drive System Dedicated Design Chain
- Greater chain retention to extend portion on the end of inner plate to firmly hold the tooth both front and cassette sprocket
- Enhancements to shifting performance
- Easy connect
- Smoother driving even over bumpy terrain
- Compatible with new generation of drive train
- Quick-Link (SM-CN910-12)
- Quick-Link connecting & removing pliers (TL-CN10) - Not included!
Product features
- Use: MTB, E-Bike
- Group: XT M8100
- Model: CN-M8100
- Gear front: 1/2-speed
- Gear rear: 12-speed
- Type: HG
- Hollow Pin: No
- Pin Link Plate: SIL-TEC
- Roller Link Plate: Chromizing
- Roller: SIL-TEC
- Connector: Quick-Link SM-CN910-12
Compatibility
- XT M8100
- SLX M7100
- XTR M9100
- 12-speed E-Bike
Links (choose variant)
- 116
- 126
- 138
Weight
- approx. 252g / 116 Links (manufacturer information)
SHIMANO CN-M9100 CHAIN 138 LINKS
Regular price OMR 37
Shipping calculated at checkout.
Item specifics
Condition:
Type:
Chain
MPN:
ICNM9100116Q
For Bike Type:
Mountain Bike
UPC:
0689228879560
EAN:
0689228879560
Compatible Brand:
Shimano
Brand:
Shimano
Color:
Silver
Model:
SHIMANO XTR CN-M9100
Compatible Bike Type:
Road Bike, Universal, Racing Bike, Mountain Bike
Material:
Steel
Number of Speeds:
12 Speed
Part Type:
Chain
SHIMANO REAR FREE HUB FH-MT410-B 36H
Regular price OMR 25
Shipping calculated at checkout.
Description of Shimano FH-MT410-B Rear Hub - Centerlock - 12x148mm Boost - Micro Spline 12-speed - 32 Spoke Holes
The Shimano FH-MT410-B rear hub with Centerlock brake disc mount is very durable and reliable thanks to its high-quality labyrinth and contact sealings. In addition, cartridge bearings guarantee smooth rolling characteristics. The hub body made of aluminium ensures for better stiffness without raising the weight. A Micro Spline freewheel makes it possible to install Shimano 12-speed cassettes.
The MTB rear hub is perfectly suited for combination with components of the Shimano Deore M6100 series.
Micro Spline
The aluminium freewheel with 22 evenly spaced teeth keeps the cassette firmly under control for immediate response and also allows the use of a 10 teeth sprocket. In addition, the smaller and compared to the usual Hyperglide freewheel bodies more extensive gearing prevents rotor damage.
Technical details of the Shimano FH-MT410-B rear hub
- hub axle system: 12 x 148 mm | thru axle (E-Thru, Boost)
- B.C.D. (left / right): 60 / 61 mm
- flange diameter (left / right): 68.8 / 69.9 mm
- flange distance: 61.6 mm
- offset: 6.6 mm
Material:
hub shell: aluminum (painted)
axle, freewheel body: steel
axle, freewheel body: steel
SHIMANO SM-CN900- 11 QUICK LINK 1 PACK
Regular price OMR 4
Shipping calculated at checkout.
CHAShimano SM-CN900-11 Quick-Link master link - can be installed without tools
The Shimano Quick-Link SM-CN900-11 master link for 11-speed Quick-Link chains allows quick and tool-free installation of the chain on the road or trail. It's not reusable. Attention: Only 1 piece is included in the scope of delivery.Technical Information:
Type: HG 11-speedClosure Type: Quick-Link
Pin Type: chromium-plated, solid
Compatibility:
- Shimano 11-speed Quick-Link chainsFeatures:
- outer plate nickel-plated- non-reusable
