The reservoir stores your hydration near your hips for greater stability on the trail, and the mesh NV panels keep your back cool and ventilated no matter how rugged the climb. The Spire is also engineered to fit women ergonomically, with an S-curved harness that keeps the pack closer to your body, and a sternum strap that sits comfortably across your chest. That way, you can forget about your load and focus on the trail ahead.

PACK CLEANING

We recommend wiping your pack with a damp cloth to remove dirt. If the pack is extremely dirty and needs a deeper cleaning, soak it in cool or warm water with a very mild soap. Rinse the pack thoroughly with cool water. If soap residue remains in the fabric, it may create suds if exposed to water or sweat.

DO NOT wash your pack in a washing machine. Machine washing may damage the pack or affect the integrity of the fabric and fasteners, and will void the Got Your Bak? Guarantee.

RESERVOIR CLEANING

The best way to care for your reservoir is to clean and dry it after every use, especially if you fill the reservoir with anything other than water. However, if a reservoir has not been cleaned after every use, and mold or discoloration develops:

• Use hot water and a CamelBak Cleaning Tablet. Or use 2 tablespoons of baking soda or bleach instead of CamelBak Cleaning Tab. Mix the solution inside your reservoir and elevate the reservoir above the tube and Big Bite Valve. Pinch the bite valve, allowing the solution to flow into the drink tube and fill the bite valve.
• Let the reservoir and cleaning solution sit in the reservoir and drink tube for about 30 minutes.
• Wash the reservoir with hot water and mild soap. Be sure to completely rinse away the cleaning solution in the reservoir and drink tube before using again. You can also use CamelBak brushes from our Cleaning Kit to scrub your reservoir and drink tube. Brushes are the best way to ensure you are scrubbing all of the areas of the reservoir clean.
• Once the reservoir is clean, be sure to air dry overnight so no moisture is trapped inside, which can cause mold to grow.

These steps will make your reservoir safe for use. If there are still spots left behind, these are permanent mold stains that may not be removable. However, your reservoir is still safe and usable after you've cleaned it.

Key Pack Features:

Panel loading, Ultra-Light materials, quick stash stretch overflow pocket, four point compression, side stretch pockets, tool attachment, sunglasses pocket

Designed to Carry:

Extra layers, rain gear, food, head lamp, trail maps, trekking poles, media, sunglasses.

Antidote Reservoir Features:

3L/100 oz Antidote? Lumbar Reservoir with Quick Link? System, 1/4 turn – easy open/close cap, lightweight fillport, center baffling and low-profile design, patented Big Bite? Valve, HydroGuard? technology, PureFlow? tube, easy-to-clean wide-mouth opening

: The symmetrical double-sided pedal self-locates just by stepping down into the cleat whether the pedal is right side up, upside down or anywhere else in its rotation. No kicking, no fumbling, no looking; just step down and go.

: The Zero allows rotational float to be precisely micro-adjusted to the exact range needed or set in a fixed-position anywhere within the 15-degree adjustment range.

: No other pedal system offers the precise adjustment or convenience of independently adjustable fore-aft, side-to-side, and rotational foot positions. Unlike the inexact set-up of traditional cleats, each of the three critical foot-axis adjustments of Zero cleats can be set or changed without affecting the position of the other two adjustments. This feature also eliminates guesswork and misalignment when replacing cleats.

: The Zero cleat positions your foot closer to the top of the spindle for improved power transfer.
• 11.5 mm stack height for 3-hole mounting
• 8.5 mm stack height for 4-hole mounting

: The thin pedal profile of the Zero pedal lets you power through corners where your rivals coast.
• Stainless - 37 degrees
• Titanium - 39 degrees

:
• Chrome-Moly pedal each - 108g
• Stainless pedal each - 103g
• Titanium pedal each - 82g
• Zero cleats per pair - 70g/118g*

: The Zero Pedal System provides the same solid connection as conventional single-sided pedals, but with Speedplay's unique, inverted design the cleat provides the platform once the cleat is engaged.

: Zero pedals use precision cartridge and needle bearings - three of them instead of two found in most other pedals - which allows the Zero to be thinner for a lower stack height, better cornering clearance, and reduced aerodynamic drag. Like all Speedplay Pedal Systems, the locking edges of Zero pedals and cleats are metal-on-metal for durability and safety, unlike our competitors who use engagement edges made of plastic.

: The Zero cleat fits any shoe with a 3-hole or 4-hole mount.

: A built-in grease port for easy bearing lubrication.

: The Zero's locking mechanism does not rely on spring tension for security, so entering and exiting Zero pedals is easy, but unintended release is virtually impossible.

Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. 

Available in several widths, to fit rims and tyres from cyclocross, to Gravel to Plus.

EXCLUSIVE FEATURES:

• Very light weight (starting at 53g for one 29” wheel) and high durability
• Premium material (high density EVA) absorbs shocks but not sealant
• Can be easily adapted to common wheel diameters (26”, 27.5”, 29”)
• No need for specific tubeless valves

CHARACTERISTICS:

Why we created it

People riding aggressively on rocky terrain would often like to reduce tyre pressure for better traction and control, limited by the worry of “hitting hard”, pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That’s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These product fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With Tyreinvader we want to offer an excellent yet simple solution, keeping weight and cost low

Lightweight

The weights for the different Tyreinvaders refer to the product uncut (for 29” wheels), so it’s even lower when adapted to 27.5” or 26” wheels.

• Tyreinvader 35 = 48 g
• Tyreinvader 40 = 53 g
• Tyreinvader 50 = 68 g
• Tyreinvader 55 = 80 g
• Tyreinvader 60 = 92 g

Tolerance on nominal weight is + / - 5%

Great durability thanks to premium material

Tyreinvader is made of high density EVA (ethylene-vinyl acetate), a closed cell polymer commonly employed by the sport shoe industry: this material can resist heavy impacts with very little damage and is very durable.

We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.

Sealant-optimized

EVA has a closed cell structure that cannot absorb any sealant, letting it free inside the tyre cavity.

Besides, the cut-outs of Tyreinvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.

As inserts have surfaces that are wetted by the sealant, a fraction of it won’t be available to repair punctures. For this reason - also with Tyreinvader - we recommend to slightly increase the quantity of sealant normally employed, by 30 ml.

The cut-outs on Tyreinvader allow the sealant to move freely inside the tyre cavity, something that is much more difficult when using solid “donut-shaped” inserts.

Tyreinvader has been designed to function with our Caffélatex sealant, ammonia free.

Easy to assemble and mount

Just cut Tyreinvader following the instructions (for 27.5” and 26”; no need to cut for 29”), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little to fit the wheel circumference), add sealant, go ride.

Our Tech Videos can help clear any doubt.

If needed, Tyreinvader can be first mounted on the wheel without tyre, to stretch and make successive mounting easier.

Real run flat behavior

Tyreinvader has been sized to sit tightly on the rim, so that - in case of emergency - it will push the tyre against the rim, allowing to ride short distances on the flat tyre. This should be considered an exceptional functioning mode, as we don’t recommend to ride Tyreinvader at zero pressure on purpose.

Compatible with any tubeless valve

The shape of Tyreinvader and a specific cut-out (to be positioned over the valve) make tyre inflation always easy, with any tubeless valve. No need for special tubeless valves.

Reduced influence on normal riding

Tyreinvader is flat and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). We still recommend to test ride Tyreinvader before racing with it.

We don’t encourage the use of lighter tyres nor of much lower inflating pressure: Tyreinvader simply allows to set tyres up the way the rider likes them, without worrying about pinch flats.

Functional packaging

Tyreinvader is sold in pairs (so 2 pieces per pack, including 4 zip-ties to assemble them), inside a transparent bag. This bag can be used to safely store Tyreinvader after removing it, to avoid sealant stains. It can also be used for other purposes, like shopping or carrying little items.

What about the little aliens and the arcade font?

Who doesn't remember SpaceInvaders? Even those who are too young for that can still learn about this staple in the video game history, and play it thanks to retrogaming. Besides, our product is actually invading the tyre, thus “Tyreinvader”.

The cut-outs serve several purposes: to save weight, to allow easy sealant flow and… to offer some cool branding/styling opportunities.

CHARACTERISTICS

Ideal pad for everday use. Compound works well on all aluminum rims and well suited for softer alloys, including magnesium.

ORIGINAL BLACK COMPOUND - READ MORE

COMPATIBILITY

warning Please ensure the Original Black compound meets the compatibility and warranty requirements of your wheels.

FITS

• SRAM | Shim Road

• Tyre break-down protection
• Range of use: children and teenagers / trailers
• Tyre construction: wired-on tyre
• Brand: Schwalbe

• The SCOTT Light Padded Shorts, with EVA padding for cushioning, is designed to flex and follow body shape and fits nicely underneath layers on ski or bike days.

• CONSTRUCTION

  EVA Foam, stretch and breathable fabrics

• COMPOSITION

  Protective parts: 100% Ethylene-vinyl acetate, Textile parts: 100% Polyester

• SIZES

  S, M, L, XL

• FEATURES

  Ergonomically shaped EVA pads protecting hip, thigh and coccyx areas
  Compression fit and flexible construction providing freedom of movement
  Stretchable and open mesh fabrics used for main construction
  Slim fit

• The SCOTT Grenade Evo Hybrid Knee Guards are designed for enduro and DH riders who value maximum knee protection. The pads' unique combination of athlete-proven D3O® material and an outer hard plate makes them the safest option, without losing flexibility. The inner padding and D3O® deliver a snug yet flexible feel for any high-energy impact, while the outer plate ensures better sliding and resistance.

• RANGE OF USE

  DH
  Enduro

• CERTIFICATION LEVEL

  Level 1 of EN1621-1

• CONSTRUCTION

  D3O® material
  Co-molded front plastic shell

• COMPOSITION

  Textile parts: 55% Polyamide, 41% Polyester, 3% Elastane, 1% Aramid
  Protective parts: 100% Polyurethane

• SIZES

  S, M, L

• FEATURES

  SCOTT specifically designed ergonomic and flexible D3O® pad
  Localized side padding
  Abrasion-resistant front panel with co-molded plastic shell improving sliding and penetration resistance
  Perforated neoprene construction with stretch mesh back panel
  Ergonomic positioned straps

• TECHNOLOGY

  D30® Impact Protection

Specifications:

Technical Information:

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS

SHIFT LEVER SET, SL-M780, DEORE XT,3X10 SPEED, W/ O.G.D, W/BASE CAP,R:2050MM L:1800MM, BLACK SP41 SEALED OUTER(1800/ 1200MM),6MM CAP X5, NOSE CAP X1,IND.PACK

Product description Shimano Tiagra 4700 10s

Rear Derailleur, Rd-4700, Tiagra, Ss 10-Speed Direct Attachment, Compatible With Low Gear 23-28T, Ind.Pack.

For 2x10V systems.

Compatible with cassettes 11-42T.

Features Shimano Tiagra 4700 10s

The Supersonic Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position despite a fairly minimalist appearance the Sonic/Ergo offers a comprehensive fit range for exactly this purpose.

The extension length and rotation can be easily adjusted using the top bolt.

The Supersonic bracket (previously known as the J5) is the premier model of the new generation Profile Design brackets. It offers easier adjustment and a greater fi t range than anything that came before it.

There are 80 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip on bar on the market (and in history).

Key Features

BBB Race Ribbon BHT-05 Handle Bar Tape

Hans Dampf has everything to increase fun in Enduro.

Up to 2.80 width, SuperGravity carcass, Apex versions and of course Addix compounds. For gorgeous handling and the highest puncture protection on demanding trails - uphill as well as downhill.

All in all very aggressive, Hans Dampf still remains good-natured at the limits and gives optimal feedback from the ground.

Super Gravity version: Puncture-proof (with Apex) with extreme lateral stability for a dynamic ride. ADDIX Soft. 

SCHWALBE HANS DAMPF TLE ADDIX TIRE MTB (ORG/TLE)[27X2.35]

KEY FEATURES

• Construction with less seams 
• Extremely breathable mesh
• Highly perforated palm
• Silicone print for better grip
• Magnet to keep them together