The DRIVETRAIN of the bike consists of all the bits that you use to push (or pull) the bike along. The key components are the pedals, cranks, chainrings, chain, cogs (cassette) and derailleur.
The humble drivetrain is greater than the sum of its parts, and we provide the best quality parts from leading brands.
42 products
42 products
CERAMICSPEED BSA SRAM DUB 28.9
Regular price OMR 130
Shipping calculated at checkout.
The CeramicSpeed BSA SRAM DUB Road bottom bracket for the installation of DUB cranks in a BSA frame with 68 mm bottom bracket width is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.
Type: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
Technical Information:
Bearings: ceramicCompatibility:
- SRAM DUB cranksFeatures:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
CERAMICSPEED SINGLE BEARING 61903C
Regular price OMR 70
Shipping calculated at checkout.
All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
CERAMICSPEED SINGLE BEARING 61803C
Regular price OMR 60
Shipping calculated at checkout.
All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
SHIMANO REAR FREE HUB FH-MT410-B 36H
Regular price OMR 25
Shipping calculated at checkout.
Description of Shimano FH-MT410-B Rear Hub - Centerlock - 12x148mm Boost - Micro Spline 12-speed - 32 Spoke Holes
The Shimano FH-MT410-B rear hub with Centerlock brake disc mount is very durable and reliable thanks to its high-quality labyrinth and contact sealings. In addition, cartridge bearings guarantee smooth rolling characteristics. The hub body made of aluminium ensures for better stiffness without raising the weight. A Micro Spline freewheel makes it possible to install Shimano 12-speed cassettes.
The MTB rear hub is perfectly suited for combination with components of the Shimano Deore M6100 series.
Micro Spline
The aluminium freewheel with 22 evenly spaced teeth keeps the cassette firmly under control for immediate response and also allows the use of a 10 teeth sprocket. In addition, the smaller and compared to the usual Hyperglide freewheel bodies more extensive gearing prevents rotor damage.
Technical details of the Shimano FH-MT410-B rear hub
- hub axle system: 12 x 148 mm | thru axle (E-Thru, Boost)
- B.C.D. (left / right): 60 / 61 mm
- flange diameter (left / right): 68.8 / 69.9 mm
- flange distance: 61.6 mm
- offset: 6.6 mm
Material:
hub shell: aluminum (painted)
axle, freewheel body: steel
axle, freewheel body: steel
SHIMANO CN-LG500 CHAIN 9/10/11SPEED
Regular price OMR 10
Shipping calculated at checkout.
The CN-LG500 is the first choice when it comes to the right chain for Shimano 9-speed, 10-speed and 11-speed Linkglide drivetrains. It has been designed to offer smooth and defined gear changes in combination with these components, which have been specially developed for e-bikes and punishing applications in the trekking and MTB sector. However, it can also be combined with Hyperglide drives and thus also scores points with road or gravel bikers with its reliable, long-lasting function. The CN-LG500 chain is held together with a chain lock, which simplifies assembly.
