Pedals

Look KéO 2 Max Carbon

Specifications:

Application: Road (beginner to advanced)
Type: clipless pedals
Pedal System: Look Road

Technical Information:

Body Material: composite
Axle Material: Chromoly
Bearings: ball, needle
Height: 15.7 mm

Contact Area: 400 mm2
Release Angle: 0°, 4.5° or 9°, depending on the cleats
Release Force: 8 to 12 Nm
Recommended Cleats: Kéo Grip cleats
Pedal Centre to Crankarm Distance: 53 mm (extendable up to 55 mm)

Features:

Q-Factor Adjustment
Thanks to the 14 mm threading the new Look axle allows for Q-factor adjustment with the help of a washer that is sold separately. The Q-factor can be adjusted from 53 to 55 mm.

Chromoly Spindle for More Reliability
The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place. A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation).

Adjustable Release Force
The pedal release force can be adjusted between 8 and 12 Nm so that beginners and advanced riders can find the right amount of force for them.

Contents:

- 1 pair of Look Kéo Classic 3 clipless pedals
- 1 pair of Look Kéo Grip cleats, grey

LOOK Kéo 2 Max Pedal - black

Lightweight, Strong, Durable

At 110 grams per pedal, this is a lightweight pedal system. But, despite being a featherweight, it’s secure and stable, so you can be confident you’re getting maximum performance when sprinting for the finish line.

The pedals are fitted with an 8Nm carbon blade, but tension can be increased to 12Nm, if needed. The visibly oversized axle, combined with a spindle that passes through internal rollers under the pedal platform, increases efficiency and limits the loss of your precious watts.

To enhance durability and reliability, the bearings are protected by an o-ring washer and are double-lipped seal to increase resistance to the elements.

Product Features

• Technology: Blade Carbon
• Tension: 8Nm with 12 Nm spare blades
• Body: Carbon
• Spindle: Chromoly +
• Platform Material: Stainless Steel / INOX
• Platform Area: 700mm²
• Platform Width: 67mm
• Stack Height + Cleats: 1.8mm
• Weight Pedal: 110g
• Weight Pair + Cleat: 288g

DESCRIPTION

• Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out.
• Its large and wide contact surface provides excellent pedaling stability.
• The Keo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.
• A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation (creating a shock on each rotation).
• LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by Andre GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

Description of LOOK Kéo Blade Carbon Ceramic Pedal - black

Shimano Dura Ace PD-R9100 SPD-SL Pedal

Shimano Saint PD-M821 SPD Pedal

Shimano 105 PD-R7000 pedal

Shimano PD-M520 SPD Pedal - black

Rally Family

• Battery type: LR44/SR44 (x4) or CR1/3N (x2)
• Battery life: up to 120 hours
• Maximum rider weight: 105 kg
• Accuracy: +/- 1%
• Field calibration
• Adjustable release tension
• Measurement location: spindle
• Communication: ANT+® and BLUETOOTH®

Rally RK 100

• Weight: 334 g
• Water resistance: IPX7
• Cleat type: KEO
• Q-factor: 53 mm (55 mm with provided 2 mm washer)
• Stack height: 12.2 mm

• Battery type: LR44/SR44 (x4)
• Battery life: up to 120 hours (with LR44 battery type)
• Weight: 451 g
• Water resistance: IPX7
• Max. rider weight: 105 kg
• Accuracy: +/- 1.0%
• Cleat type: SHIMANO SPD
• Q-factor: 53 mm/55 mm with supplied spacing washer
• Stack height: 13.5 mm
• Field calibration
• Adjustable release tension
• Garmin Connect™
• Measurement location: Spindle
• Communication: ANT+® and Bluetooth®

• Flat pedal feel with clipped-in control
• All aluminum platform for enhanced durability
• 4-sided entry / superior mud shedding
• Customizable float & release angle
• Premium bearings & double seal system

The new Stamp 1 Gen 2 builds upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement.

Crafted with an uncompromising commitment to quality, our updated Stamp 1 pedal boasts a robust nylon composite body and inherits the tried-and-true internals from our award-winning Stamp 7 flat pedals, keeping you supported lap after lap.

GRIP ON DEMAND
A true concave body design cradles your shoe and provides un-interrupted contact with the pins. The spindle and bearing design borrowed from our Stamp 7 pedal eliminates any "axle bump" or bulge down the centerline of the pedal, resulting in consistent, confidence-inspiring grip. 

LIGHTWEIGHT & DURABLE
The Stamp 1 Gen 2's lightweight nylon construction doesn't skimp on durability - it's sleeker yet more robust than our previous iteration.

CHOOSE YOUR SIZE
Every model in our Stamp flat pedal range includes both a small and large size option to dial in your setup.

: The symmetrical double-sided pedal self-locates just by stepping down into the cleat whether the pedal is right side up, upside down or anywhere else in its rotation. No kicking, no fumbling, no looking; just step down and go.

: The Zero allows rotational float to be precisely micro-adjusted to the exact range needed or set in a fixed-position anywhere within the 15-degree adjustment range.

: No other pedal system offers the precise adjustment or convenience of independently adjustable fore-aft, side-to-side, and rotational foot positions. Unlike the inexact set-up of traditional cleats, each of the three critical foot-axis adjustments of Zero cleats can be set or changed without affecting the position of the other two adjustments. This feature also eliminates guesswork and misalignment when replacing cleats.

: The Zero cleat positions your foot closer to the top of the spindle for improved power transfer.
• 11.5 mm stack height for 3-hole mounting
• 8.5 mm stack height for 4-hole mounting

: The thin pedal profile of the Zero pedal lets you power through corners where your rivals coast.
• Stainless - 37 degrees
• Titanium - 39 degrees

:
• Chrome-Moly pedal each - 108g
• Stainless pedal each - 103g
• Titanium pedal each - 82g
• Zero cleats per pair - 70g/118g*

: The Zero Pedal System provides the same solid connection as conventional single-sided pedals, but with Speedplay's unique, inverted design the cleat provides the platform once the cleat is engaged.

: Zero pedals use precision cartridge and needle bearings - three of them instead of two found in most other pedals - which allows the Zero to be thinner for a lower stack height, better cornering clearance, and reduced aerodynamic drag. Like all Speedplay Pedal Systems, the locking edges of Zero pedals and cleats are metal-on-metal for durability and safety, unlike our competitors who use engagement edges made of plastic.

: The Zero cleat fits any shoe with a 3-hole or 4-hole mount.

: A built-in grease port for easy bearing lubrication.

: The Zero's locking mechanism does not rely on spring tension for security, so entering and exiting Zero pedals is easy, but unintended release is virtually impossible.

Description of Garmin Rally RS200 Pedal-Based Dual-Sensing Power Meter

Specifications:

Technical Information:

Features:

• Model: BPD-04F
• 0 degree
• Compatible with BBB BPD-06 BPD-07 BPD-08 pedals and other systems
• Colour: black
• Model: BPD-04A

Full suspension or entirely rigid, upon a mountain top or deep in the woods, it’s up to you to define your trail. Our new Mallet Trail pedal fills the missing piece in our clip-in range, sitting perfectly between our Candy and Mallet E pedals. Equipped with a long spindle for stability and speed, two adjustable pins per side for added traction, and our eggbeater system with 4-sided entry and superior mud shedding, the Mallet Trail is ready to join you on your next adventure.

• Optimized platform size and surface for trail/gravel riding
• Long spindle, 57mm q-factor for more shoe clearance and stability at speed
• Integrated traction pad technology to customize and optimize the shoe/pedal interface
• 2 adjustable pins per side for grip
• Hex alloy endcap for durability
• 4-sided entry / superior mud shedding
• Customizable float & release angle