10 products
LOOK KEO CLASSIC 3 PLUS PEDAL
Regular price OMR 38 Save OMR -38DESCRIPTION
- Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out.
- Its large and wide contact surface provides excellent pedaling stability.
- The Keo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place.
- A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation (creating a shock on each rotation).
- LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by Andre GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.
KEO BLADE CARBON CERAMIC
Regular price OMR 100 Save OMR -100Description of LOOK Kéo Blade Carbon Ceramic Pedal - black
KÉO Blade Carbon Ceramic: Faster – Longer
Designed to win, the new KEO BLADE CARBON CERAMIC improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON CERAMIC has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON CERAMIC is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.
The KEO BLADE CARBON CERAMIC has the best weight / power ratio in its class.
Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon Ceramic is available in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.
Blade technology applied to the Kéo Blade: for new clip-in/clip-out sensations and an aerodynamic profile. A large and wide platform (400 mm² / 60 mm) ensures excellent pedaling stability and good power transfer. New spindle system providing reduced platform height (14 mm).
SSpecifications:
- USE: Race
- BODY: Carbon
- SPINDLE: Chromoly Steel +
- THREADING: 9/16 X 20 mm
- BEARINGS: Ceramic
- STACK HEIGHT: 14.8 mm
- DISTANCE PEDAL SPINDLE / CRANKARM: 53 mm
- PLATFORM WIDTH: 67 mm
- PLATFORM SURFACE AREA: 700 mm²
- TENSION: Pedals come installed with “12” carbon blades + additional “16” carbon blades (“20” carbon blades sold separately)
- CLEATS: Kéo Cleats-Gray (incl.)
- FLOAT: 0 °, 4.5 ° or 9 ° according to the cleat color (Black, Grey, Red) (black and red separately available.)
- PEDAL WEIGHT: 110 gr (290 gr per pair with cleats and screws)
- ACCESSORIES: incl. 2 sets of blades +1 pair of Kéo Cleats-Gray + screws
Technologies
CERAMIC BEARING
Every component, every ball is meticulously selected to ensure the highest level of quality and performance. The balls are precisely calibrated one by one by a machine, down to the micrometer. They are then ordered according to size in perfectly-adapted rings, with the result that every bearing has a totally unique structure.A long lifespan is the main advantage of ceramic bearings. Rounder and harder than traditional balls, they are less sensitive to dust or deposits and guarantee consistent, durable performance. Furthermore, ceramic is not subject to corrosion. These physical properties ensure the bearings have a lifespan 4 to 6 times longer than standard steel bearings.
Reduced friction is the best-known and most characteristic advantage of ceramic bearings. The perfectly circular shape and the hardness of the balls combined with ceramic-specific, optimized greases allows for an 18% reduction of the frictional forces applied to the bearing.
OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITY
The spindle of the new CARBON BLADE CERAMIC has been completely redesigned. It is built around an oversized axle and spindle that passes through internal roller and ceramic bearings located directly under the pedal platform. This new construction saves approximately 2 watts at 100 rpm.The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.
Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated endplug with an o-ring washer and has also been equipped with an internal, double-lipped seal.
LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.
ULTRA-POWERFUL PLATFORM
To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.The platform of the CARBON BLADE CERAMIC is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.
With 700 mm² of surface area, the CARBON BLADE CERAMIC offers an optimized contact platform for an efficiency and power transfer that is unmatched on today’s market.
Its weight / power ratio positions it well above the competition.
BODY AND BLADE CARBON TECHNOLOGY
Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUT.
Included in delivery: 1 pair of pedals incl. cleats (grey with 4,5° angular float), screws and 2 pairs of blades (12 + 16 Nm)
Material: pedal body, blades: carbon
axle: chromoly
bearings: ceramic
cleat surface: stainless steel
Weight supplement: per pedal, without cleats)
approx. 290 gram (per pair, with cleats and bolts)
(manufacturer's specs
CRANKBROTHERS STAMP 1 V2 BLACK
Regular price OMR 25 Save OMR -25
The new Stamp 1 Gen 2 builds upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement.
Crafted with an uncompromising commitment to quality, our updated Stamp 1 pedal boasts a robust nylon composite body and inherits the tried-and-true internals from our award-winning Stamp 7 flat pedals, keeping you supported lap after lap.
GRIP ON DEMAND
A true concave body design cradles your shoe and provides un-interrupted contact with the pins. The spindle and bearing design borrowed from our Stamp 7 pedal eliminates any "axle bump" or bulge down the centerline of the pedal, resulting in consistent, confidence-inspiring grip.
LIGHTWEIGHT & DURABLE
The Stamp 1 Gen 2's lightweight nylon construction doesn't skimp on durability - it's sleeker yet more robust than our previous iteration.
CHOOSE YOUR SIZE
Every model in our Stamp flat pedal range includes both a small and large size option to dial in your setup.
BBB PEDALS DUALCHOICE BLACK BPD 23
Regular price OMR 25 Save OMR -25Specifications:
Application: MTBType: clipless, platform
Pedal System: Click & Go, SPD-compatible
Technical Information:
Axle Material: CrMoBinding: one-sided
Bearings: maintenance free, sealed
Adjustable Entry and Release Tension: yes
Recommended Cleats: Click & Go
Features:
- SPD-compatible- 4° of float
- easy clip-in and clip-out mechanism even when dirty
CRANKBROTHERS MALLET E (ENDURO) PEDAL MATTE BLACK CLIP IN
Regular price OMR 80 Save OMR -80Full suspension or entirely rigid, upon a mountain top or deep in the woods, it’s up to you to define your trail. Our new Mallet Trail pedal fills the missing piece in our clip-in range, sitting perfectly between our Candy and Mallet E pedals. Equipped with a long spindle for stability and speed, two adjustable pins per side for added traction, and our eggbeater system with 4-sided entry and superior mud shedding, the Mallet Trail is ready to join you on your next adventure.
- Optimized platform size and surface for trail/gravel riding
- Long spindle, 57mm q-factor for more shoe clearance and stability at speed
- Integrated traction pad technology to customize and optimize the shoe/pedal interface
- 2 adjustable pins per side for grip
- Hex alloy endcap for durability
- 4-sided entry / superior mud shedding
- Customizable float & release angle