All Products

• The original duPont Teflon based lubricant made specifically for use on bicycles. Teflon is used to reduce the coefficient of friction and reduce mechanical wear, and is suspended in a solvent carrier.
• Penetrates into hard-to-reach areas for maximum protection, such as the internal pins and bushings of a chain.
• Dry' formula resists attracting dirt and grime.
• For use on chains, derailleurs, and shifter and brake pivots .
• The synthetic oils used are non-toxic and biodegradable.

DESCRIPTION 

Premum wax-based lubricant. Optimal cleanliness.

Extra Dry Wax is a wax-based dry lubricant that keeps drivetrains extra clean by effectively repelling water and dust. Made from a water and wax bse, it offers high protection against the corrosion and provides excellent lubrication that makes gear changes smoother. This highly effective lubricant is especially suited for avid cyclists concerned with maintaining a smooth, quieter, clean and dry drivetrain. 

• Suitable for all weather conditions
• Chain clean lubrication with this wax
• Protective coating - excellent protection against wear, rust and oxidation
• Friction reduction - smoother pedalling and a quieter drivetrain
• 120ml squeezable bottle with safety cap
• 5* performance
• 3* durability
• 5* cleanliness

Application Instructions

1. Degrease and clean the chain using, for example, Zefal Bike Degreaser and the ZB Clean brush. Effective lubrication can only be achieved on a clean, degreased chain.
2. Rinse and dry using a cloth
3. Apply a moderate amount of Pro Wet Lube on the chain while rotating the pedals
4. Wipe any excess lubricant off the chain 

Description of Finish Line Ceramic Wax Lubricant 

About this product

Bikeworkx CHAINN STAR EXTREM 50 ML

• suitable for extreme conditions

• Ensures silky smooth gear shifts
• Reduces friction and energy consumption
• Repels water for chain and component protection
• Excels in wet, muddy riding conditions
• Extreme pressure additives for increased efficiency
• Vegetable oil-based formula for eco protection
• Can be applied to chain, shifters, cables, derailleurs, pedals, and cleats
• Ideal for MTB, Road and Cyclocross

• Wax based formula excels in dry, dusty conditions
• Provides smooth and quiet gear shifting
• Can be applied to chain, cables, shifters and derailleurs

A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in dry and dusty conditions. Formulated with our unique eBike specific lubricity pack to handle the higher torque loads of an eBike drivetrain

Our eBike Dry Chain Lube is a premium formula that creates a ceramic coating for unparalleled lubrication. Check out how to apply with ease alongside the Muc-Off eBike Drivetrain Tool.

eBike Drivetrain Tool

If you own an eBike then you’ll know that cleaning and lubing your chain is a tricky business, as the crank doesn’t spin backwards like a regular bike unless it’s flipped upside down. But this can scratch components, or if you use an Allen key in your crank bolt it can get stuck in the bolt, or worse, damage your precious cranks!

NOTE: Our eBike Drivetrain Tool is not compatible with Spiderless Chainrings.

• OVERVIEW

  C3 Dry Ceramic Chain Lube raises the bar when it comes to providing the ultimate lubrication. It provides total corrosion protection and unparalleled performance in dry, dusty and damp conditions. With added nano ceramic particles and synthetic polymers, C3 Dry Ceramic Chain Lube maximises your power output by reducing metal to metal contact to a ground breaking, low level and provides up to 10 times the performance of conventional chain oils and lubes. The Muc-Off R&D team definitely didn’t cut corners when they brought the future of bike lubes to the masses.

  In fact, our team made sure the C3 Dry Ceramic Lube is safe by creating a biodegradable, petroleum free formula so you don’t have to worry about yourself, your bike or the planet. The new C3 Dry Ceramic Lube is available in 50ml and 120ml so whether you’re in the workshop, on the road or hitting the trails, we’ve got you covered.

  SEE IT IN ACTION
  Our C3 Ceramic Dry Lube is a premium bike chain lubricant that creates a ceramic coating for the ultimate chain performance in dry weather conditions.
  
  HIGHLIGHTS
  

  • Specifically formulated to excel over long distances in dry and dusty conditions
  • Contains UV dye so that you can check to ensure maximum coverage
  • Ceramic coating provides increased drive chain protection
  • FEATURES
  • Ideal for Road Cycling, Cyclocross & MTB
  • Provides the ultimate performance in damp, dry & dusty conditions
  • Petroleum free formula for eco protection
  • Ceramic coating for increased drive chain protection
  • Synthetic polymers for long distance performance
  • Incredible durability
  • Pipette system for easy application
  • Includes UV torch to check for 100% coverage
  • HOW TO USE
  • Fully de-grease drive chain thoroughly before lube application.
  • Ensure drive chain area is dry.
  • Shake bottle vigorously and apply a moderate amount of C3 Dry Lube to the inside chain link, whilst spinning pedals in a reverse motion.
  • Ideally apply 3-4 hours before your ride.
  • Check to make sure the lube coverage is even using the supplied UV Torch!
  • Wipe excess lube carefully

Hydrodynamic Chain Lube is the Ultimate in bicycle chain lubricant technology. If you are looking for the most efficient chain lubricant formula for long distances and/or the harshest of weather conditions, look no further.

Born in 2014 and baptised at the most famous French road race in the world, with the worst weather conditions seen in years, our new Hydrodynamic Chain Lube is the first to be created by the Muc-Off research team in collaboration with Team Sky - now Team Ineos.

Hand blended in the UK, we used the finest ingredients to create a sophisticated, synergistic blend of esters coupled with aerospace quality based oil lubrication, before packing it with ground-breaking extreme pressure additives. All this means it’s possible to create a high strength film forming lubricant which prevents metal to metal contact to ensure peak performance, even under the most extreme workloads that a pro peloton can throw at it.

Each handmade batch takes hours of painstaking work to deliver a highly advanced bicycle chain lubricant, reaching previously unattainable levels of lubrication and protection.

SEE IT IN ACTION
Introducing Hydrodynamic Lube, one of our fastest chain lubricants around. Just the thing to find those marginal gains! It's a high performance chain lubricant that's ideal for all weather conditions.Take a closer look as Chopper shows you how to use hydrodynamic lube and why it's the lube of choice for many athletes.

HIGHLIGHTS

• Ideal for Road Cycling and Cyclocross
• Provides the ultimate performance in both wet & damp or dry & dusty conditions
• Synthetic polymers for long distance performance

C3 Dry Ceramic Chain Lube raises the bar when it comes to providing the ultimate lubrication. It provides total corrosion protection and unparalleled performance in dry, dusty and damp conditions. With added nano ceramic particles and synthetic polymers, C3 Dry Ceramic Chain Lube maximises your power output by reducing metal to metal contact to a ground breaking, low level and provides up to 10 times the performance of conventional chain oils and lubes. The Muc-Off R&D team definitely didn’t cut corners when they brought the future of bike lubes to the masses.

In fact, our team made sure the C3 Dry Ceramic Lube is safe by creating a biodegradable, petroleum free formula so you don’t have to worry about yourself, your bike or the planet. The new C3 Dry Ceramic Lube is available in 50ml and 120ml so whether you’re in the workshop, on the road or hitting the trails, we’ve got you covered.

SEE IT IN ACTION
Our C3 Ceramic Dry Lube is a premium bike chain lubricant that creates a ceramic coating for the ultimate chain performance in dry weather conditions.

HIGHLIGHTS

• Specifically formulated to excel over long distances in dry and dusty conditions
• Contains UV dye so that you can check to ensure maximum coverage
• Ceramic coating provides increased drive chain protection

Hydrodynamic Chain Lube is the Ultimate in bicycle chain lubricant technology. If you are looking for the most efficient chain lubricant formula for long distances and/or the harshest of weather conditions, look no further.

Born in 2014 and baptised at the most famous French road race in the world, with the worst weather conditions seen in years, our new Hydrodynamic Chain Lube is the first to be created by the Muc-Off research team in collaboration with Team Sky - now Team Ineos.

Hand blended in the UK, we used the finest ingredients to create a sophisticated, synergistic blend of esters coupled with aerospace quality based oil lubrication, before packing it with ground-breaking extreme pressure additives. All this means it’s possible to create a high strength film forming lubricant which prevents metal to metal contact to ensure peak performance, even under the most extreme workloads that a pro peloton can throw at it.

Each handmade batch takes hours of painstaking work to deliver a highly advanced bicycle chain lubricant, reaching previously unattainable levels of lubrication and protection.

SEE IT IN ACTION
Introducing Hydrodynamic Lube, one of our fastest chain lubricants around. Just the thing to find those marginal gains! It's a high performance chain lubricant that's ideal for all weather conditions.Take a closer look as Chopper shows you how to use hydrodynamic lube and why it's the lube of choice for many athletes.

HIGHLIGHTS

• Ideal for Road Cycling and Cyclocross
• Provides the ultimate performance in both wet & damp or dry & dusty conditions
• Synthetic polymers for long distance performance