All Products

• The original duPont Teflon based lubricant made specifically for use on bicycles. Teflon is used to reduce the coefficient of friction and reduce mechanical wear, and is suspended in a solvent carrier.
• Penetrates into hard-to-reach areas for maximum protection, such as the internal pins and bushings of a chain.
• Dry' formula resists attracting dirt and grime.
• For use on chains, derailleurs, and shifter and brake pivots .
• The synthetic oils used are non-toxic and biodegradable.

• Polyester/spandex mesh with moisture management properties
• Fade resistant sublimated graphics
• Brushed elastic with silicone logo on top opening keeps sleeve in place
• Flat locked seams to minimize chaffing and increase comfort
• Reflective logos for added visibility

• Stylish embossed slip-on cuff for application ease and comfort
• Seamless mesh top hand and gussets improve fit over knuckles and increase airflow
• Thumb overlay aids in reducing blisters
• Perforated Clarino palm with gel pads for vibration dampening and comfort
• Pull tabs on middle fingers to aid in removal 

Finish Line Citrus Bike Chain Degreaser

The citrus bike degreaser is super strong and fast bike components cleaning solution. Finish Line Citrus Bike Chain Degreaser was the industry's original orange peel based cleaner that has set the standard since 1988. Citrus Bike Chain Degreaser is formulated with powerful and natural citrus extracts, so a bicycle drivetrain will clean up faster and with less scrubbing. This technology will break down and remove the grease, oil, and wax that build up on a bike's drivetrain. Rinse with water for a residue-free finish.

Application tips: Simply spray or brush along bike chain, chainring, rear derailleur, front derailleur, cassette, and jockey wheels. Lightly scrub along these bike parts to remove black dirt, old sticky grease that builds up in the bike components with a brush and rinse off with water for a residue-free finish.

NOTE: Do not apply Finish Line Citrus Degreaser on any braking components.

• Aerosol Spray Can: 355ml (12oz) | Pour Can: 600ml (20oz)
• Formulated with powerful orange peel based natural citrus extracts
• Break down and remove grease, oil, and wax with a simple scrub
• Thoroughly clean components with every application.

Threaded CO2 cartridges for use with all Lezyne CO2 inflators.

16g CO2 cartridges are compact and suitable for high pressure tires.

25g CO2 cartridges contain a larger charge suitable for high volume MTB tires

The Hecto Drive 500XL is a compact, durable cycling light with a machined aluminum body with built-in cooling fins and cutouts for side visibility. Its single LED design provides an impressive maximum output of 500 lumens and eight output modes, including a Daytime Flash mode. Offering up to 20 hours of total runtime, charging is simple with an integrated cable-free USB stick, and the light straps securely to a variety of handlebar shapes and sizes.

Description of Finish Line Ceramic Wax Lubricant 

Less Is More.

Now you can ride with the feeling like you are not wearing gloves yet take comfort knowing you are covered.

HIGHLIGHTS:

Durable machined aluminum base with a steel barrel and piston.

Oversized 3.5 inch gauge. Extra long, high-strength hose with composite matrix couplers.

Painted finish with varnished wood handle. ABS1 Pro equipped.

KEY FEATURES

• Full length semi-autolock zipper
• 3 main back pockets
• Water-repellent back pocket
• Mesh insert for better ventilation
• Reflective stripe for visibility
• Silicone bottom hem gripper

KEY FEATURES

• Full length semi-autolock zipper
• Longer sleeve construction
• Elastic bottom hem
• Silicone bottom hem gripper
• 3 back pockets

• A powerful, multi-purpose front light with up to 1000 lumens of output
• Up to 87 hours of runtime
• Its versatile strap securely mounts to variety of bar shapes and sizes
• It Features eight output modes, with a class-leading 1000 lumen Daytime Flash mode.
• Its versatile strap securely mounts to variety of bar shapes and sizes.

• Effective down to 10F/ -12C
• Seals 7.5mm holes for up to 6mo
• Must be poured into tire during install
• Not injector compatible (It seals holes bigger thany our valve)
• Use Replenisher every 90-120 days for best performance
• 6, 9, and 12mm recycled carbon fibers are dispersed evenly by a foaming latex to create ultra strong seals
• Made in the USA 

SILCA Ultimate Tubeless Sealant uses the power of a foaming latex formula combined with chopped carbon fibers to boost sealing power even at higher pressures. Ultimate Tubeless Sealant contains 5% by volume, 6, 9, and 12mm chopped carbon fibers which have been reclaimed from recycled bicycles, carbon wheels, racecars, and aircraft components. A unique foaming latex formula allows for the very lightweight carbon fibers to be evenly dispersed within the sealant while riding, which allows for a higher fiber content than possible with Kevlar or fiberglass. At this high fiber loading, bundles of carbon fiber are carried directly to the puncture by the sealant flow where thousands of micro-bubbles collapse on each other, depositing their high stiffness carbon fibers over the hole. During this process, the carbon fibers form a dam of fibers against the tire casing not unlike a beaver dam of sticks blocking the flow of a stream. This dam of high stiffness/high strength fibers has been shown to seal holes in testing up to 7.5mm, some 25% larger than conventional technologies.

After the puncture is sealed, that area of the tire is left with a zone of carbon fiber reinforced latex bridging the top and bottom of the hole, helping to reduce the likelihood of future punctures in that area when compared to other sealant additives such as cornmeal, glitter, or fiberglass.

This superior sealing ability and hole reinforcing ability of the carbon fiber also allows for a higher concentration of anti-freeze agents in the sealant which means more effective sealing at low temperatures (6mm holes seal at 18deg F/ -7deg C), as well as longer lasting sealant (7-9months depending on humidity).

Details

• The SCOTT RC Team bibshorts feature SCOTT's ++ Performance padding and mesh bib straps for the ventilation and comfort you need on race days. On top of that, the silicone leg hem grippers hold the shorts in place so all you have to think about is your riding.

• CONSTRUCTION

  DRYOxcell quick dry knit fabric, DUROxpand 4-way stretch knit fabric

• COMPOSITION

  Main fabric: 80% Polyamide, 20% Elastane, Insert 1: 80% Polyester, 20% Elastane, Mesh: 85% Polyester, 15% Elastane

• FIT

  Athletic

• FEATURES

  SCOTT ++ Performance padding
  Silicone leg hem gripper
  Mesh suspenders for better ventilation

• PADDING

  ++ Performance Padding Men 2019

• SIZE

  S-XXL

• APPROX. WEIGHT

  180g

• CARE INSTRUCTIONS

  Do not iron
  Do not tumble dry
  Machine wash: Normal treatment (max. 30°C)
  Do not dryclean
  Do not bleach

The profile of VALEGRO's polycarbonate shell has been tested and refined by KASK’s engineers in conjunction with a wind-tunnel to get the best results in terms of thermo-cooling performance. The VALEGRO offers advanced ventilation and an impressive weight of just 180g (size small). This new design offers maximum cooling through 37 ventilation holes with new breathable and quick-dry padding. The 5mm layer of fast-wicking thermoformed tri-dimensional padding is antistatic, bacteriostatic, heat regulating and moisture transferring using Resistex Carbon. Alongside this cutting edge technology, the chin pad with eco-leather strap contributes to a helmet that’s comfortable to wear, all day.

• HyVent: Structure and design of the shell implement the air flow and break up the exchangeable heat.
• High Breathability: Because the inner padding fiber speeds up the evaporation process of perspiration, slow down the formation of humidity on the skin and keeps the temperature constant.
• Anti bacterial: Because the inner padding fiber respects the skin and protects it from bacteria and pollutant dusts. Eliminating the risk of annoying allergies.
• Anti static: Because of its conductivity, the inner padding fiber absorbs and disperses electric charges accumulated from the environment or during physical exercise.
• 3D dry padding: The tridimensional 3D DRY padding utilizes a multi-layer open cell construction process: high technology for the best comfort and performance.
• Octo fit: Rubberised Micro Dial adjuster provides improved finger grip. Floating cradle contact points combine internal gel pads for optimum comfort. These supports are designed to oscillate freely through 180° allowing a perfect fit on any shaped head. The Skeletal Brackets of the cradle have been designed and refined to provide the best fit and support whilst being as light as possible.
• Eco-leather chinstrap: Chin pad with eco-leather chinstrap The anallergic and washable chinstrap is extremely comfortable and helps to avoid irritation of the skin.
• MIT: The MIT Technology, applied to all KASK cycling helmets, guarantees a higher safety and a complete protection thanks to the polycarbonate layer that covers the shell on the top, on the base ring and on the back.
• In moulding: The innovative “in moulding” technology, joining the inner polystyrene cap to the outer polycarbonate one, ensures a better shock absorption.
• Weight 180 g (S size).
• Standards CE EN 1078.

Description of SCOTT RC Premium ++++ Bibshorts - nightfall blue/lemongrass yellow

• The SCOTT Aspect Sport Gel short finger junior glove will please any rising star. Its lightweight back-of-hand mesh offers great ventilation and the one-piece palm construction is equipped with medium padding to provide comfort for each ride. With a wrist closure and nose wipe on the thumb, young riders will be equipped like their pro idols.

• RANGE OF USE

  Junior

• COMPOSITION

  Top Hand: 68% Polyester, 20% Polyamide, 12% Elastane; Palm: 65% Polyamide, 35% Polyurethane

• FIT

  Regular

• FEATURES

  Breathable mesh#Padded and perforated palm#Microfiber nose wipe#Wrist closure#Two-finger pull system for easy removal

• SIZE

  XS-XL

• CARE INSTRUCTIONS

  Do not iron
  Do not tumble dry
  Machine wash: Normal treatment (max. 30°C)
  Do not dryclean
  Do not bleach