All Products

Filter
All Products
44 products

44 products

Quick view
SRAM PowerLock 12-speed Eagle Chain Lock
SRAM
OMR 3
Quick view
CERAMIC SPEED UFO CHAIN SRAM AXS CHAIN 12SPEED
SRAM
OMR 68
Quick view
SHIMANO REAR FREE HUB FH-MT410-B 36H
SHIMANO
OMR 25
Quick view
SHIMANO SM-CN900- 11 QUICK LINK 1 PACK
SHIMANO
OMR 4
Quick view
CERAMICSPEED SINGLE BEARING 61903C
CERAMIC SPEED
OMR 70
Quick view
CERAMICSPEED SINGLE BEARING 61803C
CERAMIC SPEED
OMR 60
Quick view
CERAMICSPEED BSA SRAM DUB 28.9 BLACK C
CERAMIC SPEED
OMR 175
Quick view
CERAMICSPEED BSA SRAM DUB 28.9
CERAMIC SPEED
OMR 130
Quick view
Shimano Tiagra FC-4700 Crankset - 10S - 36/52
SHIMANO
OMR 60
SRAM PowerLock 12-speed Eagle Chain Lock
SRAM

SRAM PowerLock 12-speed Eagle Chain Lock

OMR 3 Save OMR -3
/
Shipping calculated at checkout.
SRAM PowerLock 12-speed Eagle Chain Lock
The chain lock PowerLock™ from SRAM is suitable for one-time locking of SRAM 12-speed chains.

Features - Sram PowerLock Cain Lock

  • No tools necessary to install
  • Allows for quick and easy maintenance

Compatibility

  • PC XX1 Eagle
  • PC X01 Eagle
  • SRAM 12-speed

Color

  • silver

Scope of delivery

  • 1 x Sram Chain Link Connector Power Lock 12-speed (no box packaging)
 00.2518.027.006
 710845922015

SRAM
1000 W Fulton Market 4th Floor
60607 Chigago (Illinois)
United States


Sram Europe Sales and Services B.V.
Paasbosweg 14
3862 ZS Nijkerk
Netherlands
info@sram.com https://www.sram.com
CERAMIC SPEED UFO CHAIN SRAM AXS CHAIN 12SPEED
CERAMIC SPEED UFO CHAIN SRAM AXS CHAIN 12SPEED
CERAMIC SPEED UFO CHAIN SRAM AXS CHAIN 12SPEED
CERAMIC SPEED UFO CHAIN SRAM AXS CHAIN 12SPEED
SRAM

CERAMIC SPEED UFO CHAIN SRAM AXS CHAIN 12SPEED

OMR 68 Save OMR -68
/
Shipping calculated at checkout.

UFO Chain SRAM AXS 12s

Due to its unique optimisation treatment, CeramicSpeed's Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimised by hand in Denmark.

This ultrafast chain has been optimised for SRAM AXS Road 12-speed compatibility, to boost the efficiency of your entire drivetrain.

CeramicSpeed UFO Racing Chains can save you between 2–5 watts on a distance of 650 km/400 miles. Apply CeramicSpeed UFO Drip after 650km to maintain your peak chain optimization over the life of the chain. 

Be aware that the UFO treatment is not optimised for wet and muddy conditions, which might cause corrosion on the chain. Read more about this in the maintenance tab.

View test data here.

In The Box

  • 114 link SRAM Force Flattop Optimized Chain
  • Quick Link
  • Disposable Gloves 
  • Sticker Sheet
  • Single-use UFO Drip Sample
SHIMANO REAR FREE HUB FH-MT410-B 36H
SHIMANO

SHIMANO REAR FREE HUB FH-MT410-B 36H

OMR 25 Save OMR -25
/
Shipping calculated at checkout.

Description of Shimano FH-MT410-B Rear Hub - Centerlock - 12x148mm Boost - Micro Spline 12-speed - 32 Spoke Holes

The Shimano FH-MT410-B rear hub with Centerlock brake disc mount is very durable and reliable thanks to its high-quality labyrinth and contact sealings. In addition, cartridge bearings guarantee smooth rolling characteristics. The hub body made of aluminium ensures for better stiffness without raising the weight. A Micro Spline freewheel makes it possible to install Shimano 12-speed cassettes.

The MTB rear hub is perfectly suited for combination with components of the Shimano Deore M6100 series.
 

Micro Spline

The aluminium freewheel with 22 evenly spaced teeth keeps the cassette firmly under control for immediate response and also allows the use of a 10 teeth sprocket. In addition, the smaller and compared to the usual Hyperglide freewheel bodies more extensive gearing prevents rotor damage.

 

Technical details of the Shimano FH-MT410-B rear hub

  • hub axle system: 12 x 148 mm | thru axle (E-Thru, Boost)
  • B.C.D. (left / right): 60 / 61 mm
  • flange diameter (left / right): 68.8 / 69.9 mm
  • flange distance: 61.6 mm
  • offset: 6.6 mm
 

Material:

hub shell: aluminum (painted)
axle, freewheel body: steel
SHIMANO SM-CN900- 11 QUICK LINK 1 PACK
SHIMANO

SHIMANO SM-CN900- 11 QUICK LINK 1 PACK

OMR 4 Save OMR -4
/
Shipping calculated at checkout.

CHAShimano SM-CN900-11 Quick-Link master link - can be installed without tools

The Shimano Quick-Link SM-CN900-11 master link for 11-speed Quick-Link chains allows quick and tool-free installation of the chain on the road or trail. It's not reusable. Attention: Only 1 piece is included in the scope of delivery.

Technical Information:

Type: HG 11-speed
Closure Type: Quick-Link
Pin Type: chromium-plated, solid

Compatibility:

- Shimano 11-speed Quick-Link chains

Features:

- outer plate nickel-plated
- non-reusable

Manufacturer Part Number:

I-SMCN90011BS
CERAMICSPEED SINGLE BEARING 61903C
CERAMIC SPEED

CERAMICSPEED SINGLE BEARING 61903C

OMR 70 Save OMR -70
/
Shipping calculated at checkout.

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. 

The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.

During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CERAMICSPEED SINGLE BEARING 61803C
CERAMIC SPEED

CERAMICSPEED SINGLE BEARING 61803C

OMR 60 Save OMR -60
/
Shipping calculated at checkout.

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. 

The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.

During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

CERAMICSPEED BSA SRAM DUB 28.9 BLACK C
CERAMICSPEED BSA SRAM DUB 28.9 BLACK C
CERAMICSPEED BSA SRAM DUB 28.9 BLACK C
CERAMICSPEED BSA SRAM DUB 28.9 BLACK C
CERAMICSPEED BSA SRAM DUB 28.9 BLACK C
CERAMICSPEED BSA SRAM DUB 28.9 BLACK C
CERAMIC SPEED

CERAMICSPEED BSA SRAM DUB 28.9 BLACK C

OMR 175 Save OMR -175
/
Shipping calculated at checkout.
The CeramicSpeed BSA SRAM DUB Road bottom bracket for the installation of DUB cranks in a BSA frame with 68 mm bottom bracket width is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.

Specifications:

Application: Road, Triathlon & Time Trial
Type: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)

Technical Information:

Bearings: ceramic

Compatibility:

- SRAM DUB cranks

Features:

- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark

Technology:

Ceramic Bearings by CeramicSpeed
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
CERAMICSPEED BSA SRAM DUB 28.9
CERAMICSPEED BSA SRAM DUB 28.9
CERAMICSPEED BSA SRAM DUB 28.9
CERAMICSPEED BSA SRAM DUB 28.9
CERAMICSPEED BSA SRAM DUB 28.9
CERAMICSPEED BSA SRAM DUB 28.9
CERAMIC SPEED

CERAMICSPEED BSA SRAM DUB 28.9

OMR 130 Save OMR -130
/
Shipping calculated at checkout.
The CeramicSpeed BSA SRAM DUB Road bottom bracket for the installation of DUB cranks in a BSA frame with 68 mm bottom bracket width is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.

Specifications:

Application: Road, Triathlon & Time Trial
Type: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)

Technical Information:

Bearings: ceramic

Compatibility:

- SRAM DUB cranks

Features:

- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark

Technology:

Ceramic Bearings by CeramicSpeed
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!

Shimano Tiagra FC-4700 Crankset - 10S - 36/52
SHIMANO

Shimano Tiagra FC-4700 Crankset - 10S - 36/52

OMR 60 Save OMR -60
/
Shipping calculated at checkout.
The redesigned Shimano Tiagra FC-4700 crankset combines weight and efficiency without sacrificing stiffness. It is available in 53-39, 52-36, 50-34 tines and new chainring options 48-34 tines and crank lengths of 165, 170, 172.5 and 175 mm. 
 
Highlights
  • Optimal power transfer motivates cyclists to pedal further and faster
  • Optimal balance between stiffness and lightness
  • Reinforced 4-arm construction
  • Centre distance: 110 mm
  • Sprocket shape optimized for the HG-X chain
  • Additional chainring combination: 48-34 teeth
  • Chainring combination: 50-34 tines, 52-36 tines, 53-39 tines, 48-34 tines
  • Sprocket combinations for adapting to a wider range of driving styles
  • Crank length: 165, 170, 172.5, 175 mm

Road Crankset :
name product : Tiagra – FC4700
manufacturer : Shimano
weight :  
material : Aluminium
arm size : Type : 170/172.5/175
fit chainring : 52-36
fit derailleur : double
fit chain : 10 s
 axle version: External cup :« 2-piece crank construction » : BB-RS500 / Pressfit : BB-RS500-PB