All Products
485 products
485 products
LEZYNE DIGITAL SHOCK DRIVE
Regular price OMR 35
Shipping calculated at checkout.
Incredibly compact and lightweight aluminum construction. Ultra low-profile Digital Strip Gauge built into the side; design keeps pump extremely compact, yet highly accurate. Provides up to 350 psi (24 bar). Cleverly integrated hose that threads into the handle when not in use. Zero-loss chuck design unthreads from the shock after valve pin seals. The ultimate shock pump for trailside tuning.
SPECS
MAX:
350psi | 24.1barLENGTH:
220mmDigital display rounds PSI to the nearest whole number and bar is rounded to the nearest tenth.
SCHWALBE G-ONE SPEED EVO VG TL 20X1.50
Regular price OMR 32
Shipping calculated at checkout.
SCHWALBE Tire G-ONE Speed 20 x 1.50 OneStar EVO MicroSkin TL Easy V-Guard | 2019
Unbelievable profile and breathtakingly fast - especially when big volume counts! Here, the G-One Speed proves itself in the 40 mm wide version with tubeless-easy technology as a guarantor for the highest speed - and not only in fascinating beach races on the Dutch coast. The G-One Speed is the evolution of the previous models S-One and Big One.
OneStar Triple Compound
The use of state-of-the-art polymers enables the lowest rolling resistance of all Schwalbe rubber compounds to date. The aerodynamically optimized, circumferential groove profile provides more grip and dynamic optics.
evolution Line
The Evolution tires are the top models of the Schwalbe offer. Fast, very light and with good mileage make these tires the first choice for all ambitious athletes. Schwalbe uses its top products only with the best materials available to meet all the requirements of a tire.
MicroSkin TL Easy
MicroSkin is the name of the development that makes the difference compared to the previous tubeless tires. The patented construction consists of a high-strength micro-fabric, which is vulcanised together with the rubber compound and the carcass. Like SnakeSkin on MTB tires, MicroSkin wraps the entire carcass and makes trouble-free tubeless easy operation possible even for high-pressure tires.
The tire can also be driven tubeless. The use of sealant is required, but the installation is just as easy as with real tubeless tires.
V-Guard
V-Guard is an extremely lightweight and cut-resistant high-end microfibre, which offers very good puncture protection for its weight. It is mainly used in light race, cross or touring tires.
Technical specifications:
Tire Type: Folding tire
intended use : Cyclocross, Gravel
Size (inches): 20 x 1.50
Size (ETRTO): 40 - 406
Version: MicroSkin, TL Easy, V-Guard
Rubber compound: OneStar
Carcass: 127 TPI
Compatibility E-bike: no
Profile: HS472
Air pressure: 3.5 to 5.0 bar (50 - 70 PSI)
Recommended rim width: 17 mm to 23 mm
Maximum load: 100 kg
Color: Black
CERAMICSPEED SINGLE BEARING 61903C
Regular price OMR 70
Shipping calculated at checkout.
All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
CERAMICSPEED SINGLE BEARING 61803C
Regular price OMR 60
Shipping calculated at checkout.
All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.
CERAMICSPEED BSA SRAM DUB 28.9 BLACK C
Regular price OMR 175
Shipping calculated at checkout.
The CeramicSpeed BSA SRAM DUB Road bottom bracket for the installation of DUB cranks in a BSA frame with 68 mm bottom bracket width is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.
Type: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
Technical Information:
Bearings: ceramicCompatibility:
- SRAM DUB cranksFeatures:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
CERAMICSPEED BSA 68mm SHIMANO RD BLACK C
Regular price OMR 185
Shipping calculated at checkout.
CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster.
Type: BSA
Shell Width: 68 mm
Axle Diameter: 24 mm (Hollowtech II)
- FSA cranks with a 24 mm axle
- Rotor cranks with a 24 mm axle
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: BSA
Shell Width: 68 mm
Axle Diameter: 24 mm (Hollowtech II)
Technical Information:
Bearings: 61805 ceramicCompatibility:
- Shimano Hollowtech II cranks- FSA cranks with a 24 mm axle
- Rotor cranks with a 24 mm axle
Features:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
CERAMICSPEED BSA SRAM DUB 28.9
Regular price OMR 130
Shipping calculated at checkout.
The CeramicSpeed BSA SRAM DUB Road bottom bracket for the installation of DUB cranks in a BSA frame with 68 mm bottom bracket width is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.
Type: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: BSA
Shell Width: 68 mm
Axle Diameter: 28.99 mm (DUB)
Technical Information:
Bearings: ceramicCompatibility:
- SRAM DUB cranksFeatures:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
SCOTT BIG JON FAT BIKE
Regular price OMR 750
Shipping calculated at checkout.
Scott Big Jon Bike - Specifications
|
Frame, shock absorption
|
|
|---|---|
| Fork | Rigid Alloy15x150mm QR axle |
| Frame | Big Jon Alloy 6061 Custom Butted Tubing Tapered HT / BB100 / 4.8 "Tire clearance 197x12mm Dropout |
| Frame material | Aluminum |
| Carriage | Race Face BSA 100mm |
|
Wheels
|
|
| Spokes | Stainless Black 15G / 1.8mm |
| Rear bushing | Syncros CT197 / 197x12mm QR axle / made by Formula |
| Front bushing | Syncros CT150 / 15x150mm made by Formula |
| Wheel size | 26 "(Fatbike) |
| Tires | Schwalbe Jumbo Jim EVO / 4.8x26 127EPI Kevlar Bead / Lite Skin PaceStar compound / Schwalbe EVO Tubes 13JE |
| Rims | Syncros with CNC holes / 32H 80mm wide |
|
Braking
|
|
| Brake type | Disk (hydraulic) |
| Brakes | Shimano M396 Disc 180 / F and 160 / Rmm SM-RT30 CL Rotor |
|
Transmission
|
|
| Number of speeds | 20 |
| Shifters / Shifters | Shimano Deore SL-M610 / Rapidfire plus 2 way release / w / gear indicator |
| System / Cranks | Race Face RXC Double 36x22 T / Chainline 74.8mm |
| Front derailleur | Shimano Deore FD-M618-D |
| Rear derailleur | Shimano SLX RD-M7000-10 SGS Shadow Type / 20 Speed |
| Cassette | Shimano CS-HG50-10 / 11-36 T |
| Chain | KMC X10 |
|
Steering wheel
|
|
| Steering column | Syncros OE Press Fit / Tapered 1.5 "- 1 1/8" OD 50 / 61mm / ID 44 / 55mm |
| Takeaway | Syncros 6061 Alloy oversize 31.8mm / 1 1/8 "/ 6 ° angle |
| Steering wheel | Syncros FL2.0 mini Riser / Alloy 6061 DB 12mm rise / 9 ° / 740mm |
|
Saddle
|
|
| Seat post | Syncros / 31.6x400mm |
| Saddle | Syncros XM2.5 |
SCHWALBE JUMBO JIM EVO SG TLE
Regular price OMR 40
Shipping calculated at checkout.
Description of Schwalbe Jumbo Jim Evolution Fatbike Folding Tire - AddixSpeedGrip - LiteSkin - 26x4.0 Inches
Bigger is better!
Extremely light. The large volume can be ridden with extremely low air pressure. Ideal on deep soils, rough and very loose terrain.ADDIX SPEED GRIP the universal compound. It definitely has the widest range of use. Perfect for XC, AM and Trail: for the majority of EVO tires there’s a version with ADDIX Speedgrip! It replaces the previous PaceStar compound where a significant, though not the only difference, during extensive use is more mileage and a longer life.
Lots of everything: speed, grip and durability. Combining all three characteristics to achieve the perfect compound is almost impossible in theory, but now Schwalbe have done it with ADDIX Speedgrip to an extent that they never thought possible!
SCHWALBE KID PLUS
Regular price OMR 10
Shipping calculated at checkout.
Application: City & Touring
Product Line: Active Line
Type: wired tyre
Tubeless System: none
Tread: HS 413
Carcass: 50 tpi
Sidewall: TwinSkin
Puncture Protection: PunctureGuard
Product Line: Active Line
Type: wired tyre
Tubeless System: none
Technical Information:
Rubber Compound: Black 'n' RollTread: HS 413
Carcass: 50 tpi
Sidewall: TwinSkin
Puncture Protection: PunctureGuard
100% R-CORE PANTS
Regular price OMR 60
Shipping calculated at checkout.
Crafted from durable, yet lightweight materials, the R-Core gear is ideal for both DH and BMX riding and exceeds the demands of the toughest critics on the track and trails.
- Polyester 600D construction for ultimate durability
- Stretch-mesh venting increases airflow and motion
- Laser inseam perforation for enhanced venting
- Internal mesh lining provides additional comfort
- Adjustable ladder closure for the perfect fit
- Zippered pockets for security of essentials
- Bonded pedal/drivetrain protection on calf
- TPR back tab for pulling or hanging ease
- Rear stretch panel for uncompromising mobility while riding
ABUS BORDO BIG ALARM 6000A FOLDING LOCK
Regular price OMR 75
Shipping calculated at checkout.
Technology
- 5 mm bars with extra-soft two-component casing to prevent damage to paintwork
- The bars and body are made of specially hardened steel
- Alarm at a volume of at least 100 dB for 20 seconds, followed by automatic reactivation
- 3D Position Detection – detects vibrations and the smallest of movements in all three dimensions and triggers an alarm
- Smart alarm – the lock only emits a small warning beep in the event of minor and brief vibrations, e.g. if a football bounces nearby
- Acoustic signals provide information on battery level and activity status
- Bars are linked with special rivets
- ABUS Plus cylinder for maximum protection against attempted manipulation, e.g. picking
LEZYNE CHAINSTAY PROTECTOR
Regular price OMR 6
Shipping calculated at checkout.
The Lezyne chainstay protector is an impact resistant neoprene chainstay protector designed to protect frame finish and reduce chain noise. Its thick padded neoprene protects the chainstay tubing and measures approx. 250mm length x 180mm width. The interior, rubberized pattern keeps protector from slipping and is held in place by heavy-duty Velcro. This Lezyne chainstay protector is available in three widths to accomodate different chainstay tubing profiles (S/M/L) and is machine washable.
Size - LARGE: 180x250 mm
MPN: L-1-PR-SMART-V1L
Size - LARGE: 180x250 mm
MPN: L-1-PR-SMART-V1L
CERAMIC SPEED OSPW ALLOY SHIM PULLEYS BEARINGS BLUE
Regular price OMR 200
Shipping calculated at checkout.
SPW for Shimano 9100/9150 and 8000 SS/8050 SS
This is an updated version of the Oversized Pulley Wheel System for Shimano 9100/9150 and 8000 SS/8050 SS. Mounting instructions for both this and the older version are to be found under our Support section.
This new design has an integrated stop tower for easier mounting.
The CeramicSpeed Oversized Pulley Wheels System has been proven to be the fastest pulley system in the world, providing energy savings starting from 2.4 watts over standard Shimano systems.
The OSPW system for Shimano 9100/9150 and 8000 SS/8050 SS is an industry leading product, chosen by many of the world's leading cycling teams and professional triathletes.
Featuring a 13-tooth upper pulley wheel and a 19-tooth lower pulley wheel to provide absolute optimisation of the rear derailleur. The upper and lower oversized aluminium pulley wheels come fitted with either standard or coated CeramicSpeed Bearings.
Please note: The OSPW System for 9100/9150 and 8000 SS/8050 SS is NOT compatible with Ultegra 8000-GS or 8050-GS (medium cage) derailleurs, nor with the clutch equipped Ultegra RD RX800 & RX805. Please see our OSPW X for Shimano RX800/805 for a compatible RX800 & RX805 version. For a compatible upgrade for Ultegra 8000-GS or 8050-GS please see our Pulley Wheels for Shimano, 11s NW.
Please note while there is design similarities this OSPW is not compatible with the 12-speed Shimano 9200 or 8100 series derailleurs.
The Shimano 9100/8000 OSPW system is compatible up to a 32 tooth cassette for both Dura Ace & Ultegra derailluers
In The Box
- Complete 13-tooth/19-tooth OSPW System
- CeramicSpeed Oil for Pulley Wheel Bearings, 15ml. dropper bottle
SRAM GUIDE ORGANIC DISC BRAKE PADS
Regular price OMR 12
Shipping calculated at checkout.
- G2 brakes are made of organic pad material for a quiet and quick response
- Aluminum backer material offers stopping power without the heavy bulk
- Ultra-light breaks ideal for cross country and trail riding
- Each pad kit includes two pads, a pad spreader spring, pad pin and clip
- For the best braking performance also replace rotors when replacing pads
AVID JUICY BB7 STEEL BACKING PLATE
Regular price OMR 12
Shipping calculated at checkout.
- Compatibility: AVID BB5 Juicy 3/5/7
- Hybrid bike brake pads 60 days money-back guarantee: if you are not satisfied for any reason, just return for a refund of your purchase price
- Suitable for Disc Brakes - Hydraulic, Mountain bike type
- Includes left and right pad, retraction spring and extra cotter pin for pad retention
- For this brake pads easy to install : Just make sure you clean the rotors before you replace with the replacement mountain bike disc brake pads for brake pads Replacing is easy with no special tools, regular replacement gives you pleasant cycling experience,
