Products

• Effective down to 10F/ -12C
• Seals 7.5mm holes for up to 6mo
• Must be poured into tire during install
• Not injector compatible (It seals holes bigger thany our valve)
• Use Replenisher every 90-120 days for best performance
• 6, 9, and 12mm recycled carbon fibers are dispersed evenly by a foaming latex to create ultra strong seals
• Made in the USA 

SILCA Ultimate Tubeless Sealant uses the power of a foaming latex formula combined with chopped carbon fibers to boost sealing power even at higher pressures. Ultimate Tubeless Sealant contains 5% by volume, 6, 9, and 12mm chopped carbon fibers which have been reclaimed from recycled bicycles, carbon wheels, racecars, and aircraft components. A unique foaming latex formula allows for the very lightweight carbon fibers to be evenly dispersed within the sealant while riding, which allows for a higher fiber content than possible with Kevlar or fiberglass. At this high fiber loading, bundles of carbon fiber are carried directly to the puncture by the sealant flow where thousands of micro-bubbles collapse on each other, depositing their high stiffness carbon fibers over the hole. During this process, the carbon fibers form a dam of fibers against the tire casing not unlike a beaver dam of sticks blocking the flow of a stream. This dam of high stiffness/high strength fibers has been shown to seal holes in testing up to 7.5mm, some 25% larger than conventional technologies.

After the puncture is sealed, that area of the tire is left with a zone of carbon fiber reinforced latex bridging the top and bottom of the hole, helping to reduce the likelihood of future punctures in that area when compared to other sealant additives such as cornmeal, glitter, or fiberglass.

This superior sealing ability and hole reinforcing ability of the carbon fiber also allows for a higher concentration of anti-freeze agents in the sealant which means more effective sealing at low temperatures (6mm holes seal at 18deg F/ -7deg C), as well as longer lasting sealant (7-9months depending on humidity).

DETAILS

Product Description:

Whether for prized race machines or the build of their dreams, the XG-1299 cassette is the ultimate, giving riders unprecedented 520-percent range thanks to the new 10-52 tooth-span. Stronger racers are now free to choose larger chainrings for more top-end speed, without sacrificing climbing range. More time is spent higher up in the cassette where athletes power transfer is most efficient and wear is minimized. Featuring the industry’s strongest X-Dome™ architecture and proven XD™ driver body, it’s also backwards compatible to give riders even more Eagle™ upgrade options for their current bikes. With multiple Olympic, World Cup and World Championship titles, it also matches up perfectly to XX1 Eagle AXS™ enabled componentry. The XG-1299 cassette utilizes the full depth of the new Eagle™ Colorsystem. Available in Black to Gold to Rainbow and all-new Copper, the XG-1299 cassette completes the expression of the worlds most accomplished and sought after bikes.

- Available in Black, Gold, Rainbow and all-new Copper.
- Stronger riders can increase chainring size for speed, without sacrificing climbing.
- Eagle Colorsystem lets the cassette and chain express the look of the bike.
- 10-52t:10,12,14,16,18,21,24,28,32,36,42,52
- Provides a massive 520-percent gear range.

• DESCRIPTION

Features of the GX Eagle T-Type cassette

• Full X-SYNC™ tooth design for the best shifting performance under load and in both directions
• 520 % gear ratio range with optimized gear jumps in the lower range thanks to the sprockets with 38 and 44 teeth
• small sprocket with 10 teeth to extend the gear ratio range
• tuned to 55 mm chainline for lower chain angle and correspondingly less wear and higher precision
• nickel coating for more durability and quieter shifting behavior
• clearly marked setup cog for a simple and tool-proof assembly
• compatible with XD freewheels

Note: Only compatible with SRAM Eagle Transmission drivetrains and T-Type components only.

X-SYNC™ | The sophisticated tooth design with high, square edges ensures maximum performance and durability. Not only the narrow, sharp tooth profile grips the chain earlier than teeth with the traditional triangular shape, also the rounded chamfer edges support the chain's guidance. In addition, to withstand adverse conditions, X-SYNC™ chainrings are provided with mud-repellent recesses, which protect the links and rollers of the chain from dirt.

Description 

SRAM Brake Disc Centerline X Secondary Rounded Edges 140 mm | Centerlock

New, optimized design with large friction surface for more brake power and less brake fading. The newly designed aluminum spider with 7-point mount the friction ring also ensures better heat dissipation and lower weight. By reducing the vibrations of the disc during braking, the noise was again reduced.

The rounded edges on the top of the disc minimize the risk of injury and comply with the guidelines of the UCI cycling association. As a further advantage, they facilitate the running of the wheel, because the rounded upper side prevents the tilting in the brake caliper.


Technical specifications:

Material: Steel Aluminum, titanium (screws)
Thickness of the friction ring: 1.8 mm
Diameter of the disc: 140 mm
Brake disc mount: Center lock
Color: silver, black

SPECIFICATION 

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.

Specifications:

Compatibility:

Features:

SPECIFICATION

Application:

Road

Gearing:

12-speed

Technical Information:

Number of Links:

114, 120

Closure Type:

master link (PowerLock™)

Pin Type:

chromium-plated, solid

Directional:

no (chain), yes (master link)

Material:

steel

• Power organic pads give riders both feel and bite.
• Bleeding Edge for simple fluid installation and maintenance.
• Tools-free reach adjust for quick personalization.

SPECIFICATIONS

Technical Information:

Technical Information:

Technical Information:

The Matchmaker X clamps from SRAM are organizational talents

Compatibility:

• Eagle AXS
• X01
• X01 single click
• X01 Eagle
• X01 Eagle Single Click
• X01 DH
• X01 DH X-Actuation
• XX1
• XX1 Eagle
• XX1 Eagle Single Click
• GX Eagle
• GX X-Actuation
• GX-E
• X1 X actuation
• S-700 X-Actuation Single Click

• SRAM G2
• SRAM Guide
• SRAM level
• SRAM DB5
• Avid Elixir 9
• Avid Elixir 7
• Avid Elixir CR Mag
• Avid Elixir X01
• Avid Elixir XX

Features:

• Stainless steel screws
• required tool Torx T25

Description 

SRAM NX Trigger Black 11-speed right

SRAM's new NX group allows a cheap entry into the 1x11 world.

The SRAM NX Trigger was developed for fast and reliable shifting in 11-speed gears with a wide gear range.
The X-ACTUATION technology ensures precision and reliability.

The trigger is mounted on the handlebars using a clamp and CANNOT be integrated into brake handles using matchmakers.


Technical data:

Material: plastic
Technologies: X-ACTUATION
Compatibility: SRAM 11-speed MTB derailleurs
Color: black, white

Details