• Expander clamping mechanism equally divides the forces.
• 40mm plug for extra grip.
• For forks with 1.1/8 carbon and aluminium steering tubes.
• Supplied with matt black alloy stem cap.
• Weight - 58g.

DESCRIPTION:

The Flow MK4 wheelset lets you do more. Since 2007, there's a reason the best riders in the world have come to us to ask for Flows. Corner harder, send it further, and carry more speed through any section of trail. Today's Flow MK4 gives you the control you need to push boundaries.

The Flow MK4 rim's patented BST-Asymmetric shape creates the most reliable tubeless seal. The rim's durable 6069 alloy construction and reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride. Strength and serviceability are long-standing priorities of every Stan’s wheel, and the Flow MK4 wheel takes those priorities further than ever before. The asym rim design allows for a single spoke length to be used on both the front and rear wheels. As with all Stan’s wheels, traditional J-bend spokes and lacing are used for their proven strength, ride quality, and serviceability. 

The M-pulse hubs at the heart of Flow MK4 wheels combine an absolutely bombproof magnetic locking engagement with incredibly smooth rolling. Based on the original innovative Project321 engagement system, the speed and durability of this system is unmatched. Unlike weaker pawl and spring designs, the M-pulse features six pawls with Neodymium magnets that offer virtually no resistance when coasting, but lock the pawl teeth into place far more reliably and consistently than springs. Each detail of the M-pulse hub was engineered to systematically eliminate weaknesses found in other designs. The 17mm axles are made of 7075 aluminum and roll on Enduro brand bearings, including a double-row freehub bearing tested to be far more durable than two individual separate bearings. The entire hub is also shielded, meaning no bearing seal is visible, offering superior protection for all conditions. With only 1.66°of rotating required for the M-pulse hub to engage, power is always instantaneous. Multiple tooth engagement provides a greater surface area to distribute load to improve both durability and speed. The angle of the pawls was even optimized to distribute stress away from the rotating bearings. Beyond the strength and speed of engagement, M-pulse hubs feature adjustable preload, allowing a tremendous decrease in drag for less resistance and more speed.

Available with Shimano Micro Spline, HG, or SRAM XDR freehub, and 6-bolt or Centerlock brake style, with options to fit all popular axle configurations.Tubeless ready with rim tape installed.   

Wide, light, strong, and tubeless, the original Flow redefined what a mountain bike rim could do. Today's Flow MK4 gives you the confidence to do even more.

WHAT'S INCLUDED:

Flow MK4 wheels include pre-installed tape for tubeless use and presta valves.

Offers protection and grip: the Freerider Pro by Five Ten

Specifications:

Application:

All Mountain, Freeride

Pedal System:

platform pedals

Closure System:

laces

Features:

• maximum protection and fast drying
• water-repellent, breathable
• insole offers durable cushioning and antimicrobial protection
• special Dotty Stealth S1 outsole for perfect grip
• toe cover with EVA padding

Materials:

Upper:

other

Lining & Cover Sole:

textile

Outersole:

other

Details

Specification

About this item

• Barrel: Aluminium
• Connection: Reversible presto / Schrader
• Handle: Thermoplastic
• Weight: 76 g without cartridge

Description

Marwi UNION CB-716 Sealed Headset bearing 30,15x41,0x7 45°/45°

This stand securely mounts your tablet at a comfortable height and distance you can enjoy the entertainment of your choice while you ride.

The holder can be adjusted to different tablet sizes length 182-267 mm, width 112-197 mm and max. thickness 13 mm.

SHIMANO Ultegra Chainring FC-R8000 Crank | LK 110 asymmetric outside

With their special tooth profiles, mount donate and climbing aids allow Ultegra FC-R8000 chainrings a particularly soft and fast switching. So with them a shift under load, as it was usual only from the rear derailleur, easily possible. Its construction of carbon fiber reinforced plastic with aluminum teeth helps to keep the weight low while increasing torsional rigidity. The hollow section of the large chainrings also contributes to this.

NOTE: The letter combinations (MS, MT, MW) behind the numbers of teeth should match for large and small chainrings. The Ultegra FC-R8000 chainrings have been specially tuned by their climbing aids and can only achieve their superior shifting performance in the combinations provided by Shimano.

Technical specifications:

Material: aluminum, carbon fiber reinforced plastic
Number of teeth (combinability index): 46 (MT), 50 (MS), 52 (MT), 53 (MW) teeth
Assembly: outside
bolt circle diameter : 110 mm
Mounting type: 4-hole, asymmetric
Compatibility: Shimano Ultegra R8000
Circuit: 2x11
Color anthracite

DESCRIPTION 

PRODUCT DETAIL

VITTORIA tube 28 "Latex Competition | 700 x 25 / 28C SV 48mm

For a long time, latex tubes were limited to tube . Better ride quality and puncture resistance are mainly due to the use of the latex material. Now you can also use the advantages of latex tubes in your folding tire. Opposite Butylschläuchen you gain in puncture safety and lose rolling resistance. So you save a few watts again on the hunt for the next destination.
Since latex tubes lose air faster due to thinness, it is advisable to check the air before each exit.

Technical specifications:

Material: latex
intended use : road bike, triathlon, time trial
Compatible sizes (inches): 28 x 1 to 28 x 1.1
Compatible sizes (ETRTO): 25 - 622 to 28 - 622
Product id: -
Valve length: 48 mm
Valve standard: SV
Color: pink

Weight according to manufacturer: 85g
Weight weighed: 78.5g (including valve and valve cap)

DESCRIPTION 

The freedom of riding, indoors.

Experience a new freedom on your indoor cycle trainer. The JetBlack Turn Riser Block has been designed to level the front wheel to allow freedom of movement. This provides a superior indoor riding experience on any indoor bike trainer.

Technical Information:

DESCRIPTION 

The XDR™ driver body is a universal mounting system for cassettes that incorporate cogs with fewer than 11 teeth. It allows for lighter and more versatile drivetrains without requiring new rear axle standards, cassette tools or hub redesigns.

• XDR 12 spd Freehub body for a 1/Fifty Series road rear wheel (12spd).

DESCRIPTION

DESCRIPTION

Lezyne's Frame Caddy is a large capacity frame pack ideal for touring and bikepacking. • Adjustable mounting straps
• Protected zipper enclosure
• Fits most frames
• Capacity: 2.5L
• Weight: 284g

Dimensions
• Bottom Length: 45cm
• Top length: 30cm
• Width: 6cm
• Height: 13cm

FEATURES

The Neosonic/Ergo/45AR aerobar offers comprehensive yet simple adjustments, ideally suited to riders wishing to add aerobars to their road, gravel or packing bike.

With the 45AR extensions this is the most versatile DL Style bar we've ever made.

This bar can be used for draft legal triathlon once shortened to meet the ITU rules.

Bracket

The Neosonic bracket offers our new generation fit range with a large offset to suit a range of applications.

Pairing this bracket with the ergo armrest offers industry leading fit options and greater comfort.

Fit Data

• Armrest Offset: -95mm to -42.5mm in 7.5mm steps
• Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm)
• Armrest Stack:  59mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit)
• Extension Width: 100mm
• Handlebar Clamp: 31.8mm
• Extension Clamp: 22.2mm

The extension length and rotation can be easily adjusted using the top bolt.