Products

The BBB TorqueSet Adjustable Torque Tool is easy to use and it might just save you a whole lot of cash in the long run.

 

If you don't own a torque wrench, get one. Bike manufacturers often tell us about people who have written off components or even frames by overtightening bolts. Gulp! It won't happen to you? I hope you're right, but even very experienced mechanics shouldn't rely on feel when going just a touch too heavy can result in a parts failure.

This BBB torque wrench is adjustable from 2-14Nm – a range that takes care of most bike components... stems, handlebars, seatposts, pedal cleats and so on.

First, you select the correct ratchet position on the tool head, then you set the maximum torque by pressing and turning the adjustment knob on the end of the handle. There are six increments per 1Nm and a clear gauge tells you exact where you're at.

Then you do your tightening. When you reach the maximum torque that you've set, you'll feel the handle click and you're done. Easy! The handle is easy to grip and it's 18cm (7in) long so you get as much leverage as you'll need.

The tool has been calibrated at the factory. You get a little Certificate of Calibration that gives you its accuracy, and it can be recalibrated further down the line.

You get some of the most common hex tools you're likely to need included in the package: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm. You also get a T25 torx tool. If you need anything else, it's a standard 1/4in drive so you can use normal sockets. The whole lot comes in its own padded protection case to keep it safe.

BikeWorkX Brake Star DOT 5.1. 100 ml

 

Brake fluid for hydraulic brake systems of bikes fulfilling DOT 5.1. specification. Volume: 100ml.

Description of BikeWorkx Chain Star Max Wax - Applicator - 25ml

Description of BikeWorkx Chain Star Bio - Chain Oil - Spray - 200ml

Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. 

Available in several widths, to fit rims and tyres from cyclocross, to Gravel to Plus.

EXCLUSIVE FEATURES:

• Very light weight (starting at 53g for one 29” wheel) and high durability
• Premium material (high density EVA) absorbs shocks but not sealant
• Can be easily adapted to common wheel diameters (26”, 27.5”, 29”)
• No need for specific tubeless valves

CHARACTERISTICS:

Why we created it

People riding aggressively on rocky terrain would often like to reduce tyre pressure for better traction and control, limited by the worry of “hitting hard”, pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That’s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These product fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With Tyreinvader we want to offer an excellent yet simple solution, keeping weight and cost low

Lightweight

The weights for the different Tyreinvaders refer to the product uncut (for 29” wheels), so it’s even lower when adapted to 27.5” or 26” wheels.

• Tyreinvader 35 = 48 g
• Tyreinvader 40 = 53 g
• Tyreinvader 50 = 68 g
• Tyreinvader 55 = 80 g
• Tyreinvader 60 = 92 g

Tolerance on nominal weight is + / - 5%

Great durability thanks to premium material

Tyreinvader is made of high density EVA (ethylene-vinyl acetate), a closed cell polymer commonly employed by the sport shoe industry: this material can resist heavy impacts with very little damage and is very durable.

We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.

Sealant-optimized

EVA has a closed cell structure that cannot absorb any sealant, letting it free inside the tyre cavity.

Besides, the cut-outs of Tyreinvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.

As inserts have surfaces that are wetted by the sealant, a fraction of it won’t be available to repair punctures. For this reason - also with Tyreinvader - we recommend to slightly increase the quantity of sealant normally employed, by 30 ml.

The cut-outs on Tyreinvader allow the sealant to move freely inside the tyre cavity, something that is much more difficult when using solid “donut-shaped” inserts.

Tyreinvader has been designed to function with our Caffélatex sealant, ammonia free.

Easy to assemble and mount

Just cut Tyreinvader following the instructions (for 27.5” and 26”; no need to cut for 29”), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little to fit the wheel circumference), add sealant, go ride.

Our Tech Videos can help clear any doubt.

If needed, Tyreinvader can be first mounted on the wheel without tyre, to stretch and make successive mounting easier.

Real run flat behavior

Tyreinvader has been sized to sit tightly on the rim, so that - in case of emergency - it will push the tyre against the rim, allowing to ride short distances on the flat tyre. This should be considered an exceptional functioning mode, as we don’t recommend to ride Tyreinvader at zero pressure on purpose.

Compatible with any tubeless valve

The shape of Tyreinvader and a specific cut-out (to be positioned over the valve) make tyre inflation always easy, with any tubeless valve. No need for special tubeless valves.

Reduced influence on normal riding

Tyreinvader is flat and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). We still recommend to test ride Tyreinvader before racing with it.

We don’t encourage the use of lighter tyres nor of much lower inflating pressure: Tyreinvader simply allows to set tyres up the way the rider likes them, without worrying about pinch flats.

Functional packaging

Tyreinvader is sold in pairs (so 2 pieces per pack, including 4 zip-ties to assemble them), inside a transparent bag. This bag can be used to safely store Tyreinvader after removing it, to avoid sealant stains. It can also be used for other purposes, like shopping or carrying little items.

What about the little aliens and the arcade font?

Who doesn't remember SpaceInvaders? Even those who are too young for that can still learn about this staple in the video game history, and play it thanks to retrogaming. Besides, our product is actually invading the tyre, thus “Tyreinvader”.

The cut-outs serve several purposes: to save weight, to allow easy sealant flow and… to offer some cool branding/styling opportunities.

Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. 

Available in several widths, to fit rims and tyres from cyclocross, to Gravel to Plus.

EXCLUSIVE FEATURES:

• Very light weight (starting at 53g for one 29” wheel) and high durability
• Premium material (high density EVA) absorbs shocks but not sealant
• Can be easily adapted to common wheel diameters (26”, 27.5”, 29”)
• No need for specific tubeless valves

CHARACTERISTICS:

Why we created it

People riding aggressively on rocky terrain would often like to reduce tyre pressure for better traction and control, limited by the worry of “hitting hard”, pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That’s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These product fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With Tyreinvader we want to offer an excellent yet simple solution, keeping weight and cost low

Lightweight

The weights for the different Tyreinvaders refer to the product uncut (for 29” wheels), so it’s even lower when adapted to 27.5” or 26” wheels.

• Tyreinvader 35 = 48 g
• Tyreinvader 40 = 53 g
• Tyreinvader 50 = 68 g
• Tyreinvader 55 = 80 g
• Tyreinvader 60 = 92 g

Tolerance on nominal weight is + / - 5%

Great durability thanks to premium material

Tyreinvader is made of high density EVA (ethylene-vinyl acetate), a closed cell polymer commonly employed by the sport shoe industry: this material can resist heavy impacts with very little damage and is very durable.

We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.

Sealant-optimized

EVA has a closed cell structure that cannot absorb any sealant, letting it free inside the tyre cavity.

Besides, the cut-outs of Tyreinvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.

As inserts have surfaces that are wetted by the sealant, a fraction of it won’t be available to repair punctures. For this reason - also with Tyreinvader - we recommend to slightly increase the quantity of sealant normally employed, by 30 ml.

The cut-outs on Tyreinvader allow the sealant to move freely inside the tyre cavity, something that is much more difficult when using solid “donut-shaped” inserts.

Tyreinvader has been designed to function with our Caffélatex sealant, ammonia free.

Easy to assemble and mount

Just cut Tyreinvader following the instructions (for 27.5” and 26”; no need to cut for 29”), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little to fit the wheel circumference), add sealant, go ride.

Our Tech Videos can help clear any doubt.

If needed, Tyreinvader can be first mounted on the wheel without tyre, to stretch and make successive mounting easier.

Real run flat behavior

Tyreinvader has been sized to sit tightly on the rim, so that - in case of emergency - it will push the tyre against the rim, allowing to ride short distances on the flat tyre. This should be considered an exceptional functioning mode, as we don’t recommend to ride Tyreinvader at zero pressure on purpose.

Compatible with any tubeless valve

The shape of Tyreinvader and a specific cut-out (to be positioned over the valve) make tyre inflation always easy, with any tubeless valve. No need for special tubeless valves.

Reduced influence on normal riding

Tyreinvader is flat and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). We still recommend to test ride Tyreinvader before racing with it.

We don’t encourage the use of lighter tyres nor of much lower inflating pressure: Tyreinvader simply allows to set tyres up the way the rider likes them, without worrying about pinch flats.

Functional packaging

Tyreinvader is sold in pairs (so 2 pieces per pack, including 4 zip-ties to assemble them), inside a transparent bag. This bag can be used to safely store Tyreinvader after removing it, to avoid sealant stains. It can also be used for other purposes, like shopping or carrying little items.

What about the little aliens and the arcade font?

Who doesn't remember SpaceInvaders? Even those who are too young for that can still learn about this staple in the video game history, and play it thanks to retrogaming. Besides, our product is actually invading the tyre, thus “Tyreinvader”.

The cut-outs serve several purposes: to save weight, to allow easy sealant flow and… to offer some cool branding/styling opportunities.

#tyreinvader #nevergameover

Tyreinvader is Made in Italy

This set contains everything you need for the professional care of your chain. The following articles are included:

Grunge brush cleaning brush
With the help of this brush, chain cleaning is child's play. Spray the grunge brush with a little cleaner and let the chain run through the bristles. The elongated bristles can also be used to clean the sprocket block or chainrings.

120 ml EcoTech degreaser:
This biodegradable degreaser is suitable for all parts on the bike. It dissolves fats and oils, but does not attack rubber and plastic. At the same time, it provides basic protection against corrosion and rust and gives metal parts a shiny surface. For less soiled parts, it can be diluted with water.

60 ml Teflon dry lubricant
Whether chain, Bowden cables or locking cylinders - this universal lubricant should not be missing in any workshop. The Teflon particles contained therein reduce friction, prevent corrosion and prevent dust or dirt from being attracted again.


Technical specifications:

intended use : chain cleaning, chain care
Properties: dirt-releasing, corrosion protection, lubricant
Container: dropper bottle
Dangerous goods: irritant, do not drink and avoid eye contact, flammable
Condition: liquid
Equipment: -
Capacity: 60 ml (Teflon dry lubricant), 120 ml (EcoTech bicycle degreaser)

Weight: 263 g

Product description

Lezyne Tubeless Plug Refill::Restock your Tubeless Kit with the Lezyne Tubeless Plug refills and ensure you can quickly repair your MTB tires and get back to your 2-wheeled trail fun in a jiffy.

For the repair of normal and tubeless bicycle tires from 12 to 29 inches. Can be used for all common bicycle valves (Schrader, Presta valve and Dunlop valves). Also suitable for e-bikes.

Special combination of active agents for first aid in the event of punctured tires. Repairs flat tires without the need for removal. Not suitable for use on tubes that ripped or cut at the side, or if the tire has slipped off the rim.

PRODUCT VARIANTS

Product Name	SKU	Bundle	Languages
Bike Tire Fix	6056	75 ml Can aerosol	D-GB-E-F-I
Bike Tire Fix	20719	75 ml Can aerosol	GB-DK-FIN-N-S

For Scott Sparks with 120mm travel model year 2017 and newer. 

• The fastest and easiest way to glue a road bike tubular.
• No messy glue or harmful vapors.
• Removable red backing strip makes centering of a tubular very easy.