528 products
528 products
SRAM AM CS XG-1275 12SP
Regular price OMR 90
Shipping calculated at checkout.
SRAM GX Eagle cassette 12-speed full pin XG-1275 10-50 teeth black
With the GX Eagle, SRAM offers a 1x12 group with a wide gear ratio at a low price. It adopts numerous technologies from the revolutionary SRAM XX1 Eagle Top Group and, with perfectly coordinated shifting components, ensures extremely high performance and durability under all conditions. The transmission range of 500% is on the level of 2-fold drives. However, with the 1x12 drive, the additional weight and the poorer switching performance of the derailleur are eliminated.
Whether pedal-heavy descents or the steepest ramps, the XG-1275 cassette provides you with the right gears in every terrain with 10-50 teeth. The stamped steel pinion and a 50 tooth aluminum pinion ensure a high durability of the cassette. The pinions are not connected by a spider, but are riveted with stainless steel pins. This not only makes the fullpin cassette lighter than conventional cassettes, the open design also offers excellent self-cleaning in muddy conditions. The teeth, which have been optimized with SRAM's X-Glide 2 technology, guarantee optimum shifting performance when shifting up and down.
Technical specifications:
Material: steel, aluminum
Switching stages: 12
Gradation: 10-12-14-16-18-21-24-28-32-36-42-50
Compatibility freehub body: SRAM XD
Technology: Full Pin, X-Glide 2
Color: Black
Weight: 450g (manufacturer information)
SRAM AM CS XS 1275 T-TYPE EAGLE 10-52T
Regular price OMR 136
Shipping calculated at checkout.
Features of the GX Eagle T-Type cassette
-
Full X-SYNC™ tooth design for the best shifting performance under load and in both directions - 520 % gear ratio range with optimized gear jumps in the lower range thanks to the sprockets with 38 and 44 teeth
- small sprocket with 10 teeth to extend the gear ratio range
- tuned to 55 mm chainline for lower chain angle and correspondingly less wear and higher precision
- nickel coating for more durability and quieter shifting behavior
- clearly marked setup cog for a simple and tool-proof assembly
- compatible with XD freewheels
Note: Only compatible with
SRAM BLEED KIT - MINERAL OIL
Regular price OMR 35
Shipping calculated at checkout.
DESCRIPTION
Standard bleed kit for keeping your SRAM DB-8 mineral oil disc brakes in peak performance
• Includes 2 syringes, M4 fittings, pinch clamps, bleed block, torx tool, crowfoot
• Maxima Mineral Oil also included
• Includes 2 syringes, M4 fittings, pinch clamps, bleed block, torx tool, crowfoot
• Maxima Mineral Oil also included
SRAM BRAKE DISC CENTERLINE 140MM/CENTER
Regular price OMR 32
Shipping calculated at checkout.
Description
SRAM Brake Disc Centerline X Secondary Rounded Edges 140 mm | Centerlock
New, optimized design with large friction surface for more brake power and less brake fading. The newly designed aluminum spider with 7-point mount the friction ring also ensures better heat dissipation and lower weight. By reducing the vibrations of the disc during braking, the noise was again reduced.
The rounded edges on the top of the disc minimize the risk of injury and comply with the guidelines of the UCI cycling association. As a further advantage, they facilitate the running of the wheel, because the rounded upper side prevents the tilting in the brake caliper.
Technical specifications:
Material: Steel Aluminum, titanium (screws)
Thickness of the friction ring: 1.8 mm
Diameter of the disc: 140 mm
Brake disc mount: Center lock
Color: silver, black
SRAM BRAKE DISC CENTERLINE XR 2PC ROUNDED EDGES 160MM 6 BOLTS
Regular price OMR 35
Shipping calculated at checkout.
SRAM brake disc Centerline XR two-part Rounded Edges 160 mm | 6 holes
New, optimized design with a large friction surface for more braking power and less braking fading. The redesigned aluminum spider ensures better heat dissipation and better aerodynamic properties. Due to the 7-point mount the friction ring, the vibrations of the disc could be reduced, which also reduces noise when braking.
The rounded edges on the top of the pane minimize the risk of injury and comply with the guidelines of the World Cycling Association UCI. Another advantage is that they make it easier to install the impeller because the rounded top prevents jamming in the brake caliper.
Technical specifications:
Material: steel | aluminum
Thick friction ring: 1.8 mm
Disc diameter: 160 mm
Brake disc mount: 6-hole
Color: silver, black
Weight according to the manufacturer: not specified
Weight weighed: 118g
New, optimized design with a large friction surface for more braking power and less braking fading. The redesigned aluminum spider ensures better heat dissipation and better aerodynamic properties. Due to the 7-point mount the friction ring, the vibrations of the disc could be reduced, which also reduces noise when braking.
The rounded edges on the top of the pane minimize the risk of injury and comply with the guidelines of the World Cycling Association UCI. Another advantage is that they make it easier to install the impeller because the rounded top prevents jamming in the brake caliper.
Technical specifications:
Material: steel | aluminum
Thick friction ring: 1.8 mm
Disc diameter: 160 mm
Brake disc mount: 6-hole
Color: silver, black
Weight according to the manufacturer: not specified
Weight weighed: 118g
SRAM BRAKE DISC HS2 ROTOR ROUNDED EDGES 6 BOLTS
Regular price OMR 24
Shipping calculated at checkout.
SRAM brake disc HS2 Rotor Rounded Edges 180 mm | 6-hole
The HS2 brake discs were specially developed for the requirements in the MTB sector. Compared to the previous versions, both the braking performance and the heat dissipation could be improved. In addition, the HS2 discs tend to be less noisy. These properties were achieved through a new profile that improves the traction of the brake pads. The improved heat management is achieved via 6 recessed spokes with a special heat-dissipating coating. In addition, the thickness of the friction ring has been increased from 1.8 mm to 2.0 mm compared to the SRAM Centerline discs. Thanks to these optimizations, the braking performance could be increased by 7% and in the Garda test the window temperature could be reduced by 40 degrees. Rounded edges on the top of the lens minimize the risk of injury and comply with the guidelines of the UCI World Cycling Association. Another advantage is that they make it easier to install the wheel, because the rounded top prevents it from tilting in the brake calliper. The discs are available with diameters of 160 - 220 millimeters. Thanks to their high stability, the HS2 brake discs are also ideally suited for E-MTB use.
Technical specifications:
Material braking surface: steel
Material spider: -
Execution: one-piece
Disc mount: 6-hole
Diameter: 180 mm
Thickness: 2.0mm
Friction ring width: n / a
Recommended brake pads: metal or resin
Technology / Features: Rounded Edges
Color: silver, black
The HS2 brake discs were specially developed for the requirements in the MTB sector. Compared to the previous versions, both the braking performance and the heat dissipation could be improved. In addition, the HS2 discs tend to be less noisy. These properties were achieved through a new profile that improves the traction of the brake pads. The improved heat management is achieved via 6 recessed spokes with a special heat-dissipating coating. In addition, the thickness of the friction ring has been increased from 1.8 mm to 2.0 mm compared to the SRAM Centerline discs. Thanks to these optimizations, the braking performance could be increased by 7% and in the Garda test the window temperature could be reduced by 40 degrees. Rounded edges on the top of the lens minimize the risk of injury and comply with the guidelines of the UCI World Cycling Association. Another advantage is that they make it easier to install the wheel, because the rounded top prevents it from tilting in the brake calliper. The discs are available with diameters of 160 - 220 millimeters. Thanks to their high stability, the HS2 brake discs are also ideally suited for E-MTB use.
Technical specifications:
Material braking surface: steel
Material spider: -
Execution: one-piece
Disc mount: 6-hole
Diameter: 180 mm
Thickness: 2.0mm
Friction ring width: n / a
Recommended brake pads: metal or resin
Technology / Features: Rounded Edges
Color: silver, black
SRAM CENTERLINE 2 PCS CENTER LOCK DISC BRAKE BLACK 160MM
Regular price OMR 35
Shipping calculated at checkout.
Technical specifications:
Material: Steel | aluminum, titanium (screws)
Friction Ring Thickness: 1.8mm
Disc Diameter: 160mm
Brake disc mount: Centerlock
Color: silver, black
Weight according to the manufacturer: kA
Weight weighed: 118g
Material: Steel | aluminum, titanium (screws)
Friction Ring Thickness: 1.8mm
Disc Diameter: 160mm
Brake disc mount: Centerlock
Color: silver, black
Weight according to the manufacturer: kA
Weight weighed: 118g
SRAM ETAP AXS BATTERY
Regular price OMR 32
Shipping calculated at checkout.
The SRAM battery for eTap / AXS is the power source for all electronic components on your bike
The SRAM battery powers your eTap® or AXS™ shifting system and your AXS seat post. It can be used for all compatible electronic components. After 60 minutes at the latest, the battery is charged and allows you to drive up to 1000 kilometres.Specifications:
Type: lithium-ion batteryVoltage: 7.4 V
Energy Quantity: 2.22 Wh
Capacity: 300 mAh
Charge Time: max. 60 minutes
Compatibility:
- eTap front derailleur- eTap rear derailleur
- AXS front derailleur
- AXS rear derailleur
- RockShox Reverb AXS seatpost
SRAM FORCE 11A MECH BRAKESET (front and rear)
Regular price OMR 70
Shipping calculated at checkout.
SPECIFICATION
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
SRAM FORCE AXS XG-1270 CASSETTE 12SPD 10-36T
Regular price OMR 90
Shipping calculated at checkout.
Specifications:
Application: Road, Gravel, CyclocrossGearing: 12-speed
Gradation: 10-28, 10-33, 10-36
Sprocket Material: steel (sprockets 1 - 11), aluminium (sprocket 12)
Freehub Compatibility: SRAM XDR
Compatibility:
- 10-36 teeth only compatible with matching Force eTap AXS rear derailleur with medium length cageFeatures:
- more uniform gear gradation through at least three gear steps with only one tooth difference each- initial sprocket with 10 teeth for a larger gear ratio range
- MINI CLUSTER construction for reduced weight and increased durability
- 10-36 version for widest bandwidth
SRAM FORCE CHAIN 12 SPEED 114LINKS R2
Regular price OMR 20
Shipping calculated at checkout.
SPECIFICATION
- Application:
- Road
- Gearing:
- 12-speed
Technical Information:
- Number of Links:
- 114, 120
- Closure Type:
- master link (PowerLock™)
- Pin Type:
- chromium-plated, solid
- Directional:
- no (chain), yes (master link)
- Material:
- steel
SRAM FORCE ETAP AXS 2X D1 HRD FM ELECTRONIC GROUPSET BLACK 6 BOLTS
Regular price OMR 650
Shipping calculated at checkout.
Product description Sram Force E-Tap AXS 2X HRD FM Electronic Groupset
You asked. We listened. eTap is now available for Force. SRAM Force eTap AXS offers the key features of RED eTap AXS—modern gearing, advanced chain management, and easy personalization—in a more affordable package. Exploring new limits has never been easier. SRAM Force eTap AXS—Simply Beyond.
Includes
Derailleur: Force eTap AXS 2s
Rear Derailleur: Force eTap AXS 12s
Shifters: Force eTap AXS HRD FM
Brakes: Force AXS (flat mount) disc brakes mountready (filled&bled), Centerline CLX Ti 6-bolt rotors, 2-part, 160 mm, Includes 160 mm disc brake adapter
Charger: Yes
Battery: Yes
SRAM FORCE ETAP AXS GROUPSET BLACK
Regular price OMR 650
Shipping calculated at checkout.
Product description Sram Force E-Tap AXS 2X D1 HRD FM Electronic Groupset
Groupset Sram Force e-Tap AXS 2x 2xD1,HRD,FM,160Rotor,bl/FD+batt.SL,hydDB
Includes
Derailleur: Force eTap 12s
Rear Derailleur: Force eTap 2s
Shifters: Force eTap
Brakes: Sram Hydraulic disc brake calipers, Centerline XR 160mm centerlock rotors
Charger: Yes
Battery: Yes
Brake Type: Disc
SRAM G2 RS DISC BRAKE G2
Regular price OMR 74
Shipping calculated at checkout.
FEATURES
- Power organic pads give riders both feel and bite.
- Bleeding Edge for simple fluid installation and maintenance.
- Tools-free reach adjust for quick personalization.
SPECIFICATIONS
| APPLICATION (DB) | MTB |
|---|---|
| BRAKE TYPE | Hydraulic |
| COLOR (DB) | Diffusion Black Anodized |
| BLADE MATERIAL | Aluminum - Stamped |
| REC MMX CLAMP (NOT INCLUDED) | Stl(glossblk)bolt,blk clp |
| ORIENTATION | Front, Rear |
| PAD TYPE (DISC) | Steel-backed organic |
SRAM HYDRAULIC HOSE FOR GUIDE RSC/RS/R DB5 MODELS 200MM
Regular price OMR 20
Shipping calculated at checkout.
Technical Information:
Length: 2000 mmCompatibility: Guide RSC, Guide RS, Guide R, DB5
Note: Not compatible with SRAM's S4 caliper. A special hydraulic hose is required for the S4 brake callipers.
SRAM MATCHMAKER X CLAMPS BC
Regular price OMR 18
Shipping calculated at checkout.
The Matchmaker X clamps from SRAM are organizational talents
With the SRAM Matchmaker X clamps you can efficiently ensure a clean look in the cockpit. You can attach compatible left and right brake and shift levers to these in combination, which you would otherwise attach to the handlebars with their own clamps. The MMX (MatchMaker X) clamps are not just clamps - they are a clean-up magic.Compatibility:
Shifters:- Eagle AXS
- X01
- X01 single click
- X01 Eagle
- X01 Eagle Single Click
- X01 DH
- X01 DH X-Actuation
- XX1
- XX1 Eagle
- XX1 Eagle Single Click
- GX Eagle
- GX X-Actuation
- GX-E
- X1 X actuation
- S-700 X-Actuation Single Click
brake handles:
- SRAM G2
- SRAM Guide
- SRAM level
- SRAM DB5
- Avid Elixir 9
- Avid Elixir 7
- Avid Elixir CR Mag
- Avid Elixir X01
- Avid Elixir XX
Features:
- Stainless steel screws
- required tool Torx T25
