All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. 

The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.

During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. 

The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.

During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

All CeramicSpeed Bearings are hand-built in Denmark. Super smooth CeramicSpeed grade 3 Silicon Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.

The balls are held in place by a reinforced polyamide cage. Every bearing is optimised with a low viscosity CeramicSpeed “Blue Grease” to minimise fiction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross and MTB. The benefits are super low friction, better power transfer and increased bearing life.

During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads and are 100% smoother.

• Inner Diameter: 12 mm
• Outer Diameter: 24 mm
• Width: 6 mm

T47/86 Bottom Bracket for SRAM DUB Road

The new SRAM DUB crank standard, built on a 28.99 spindle, allows for a more contamination resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for.  

T47 is a newer bottom bracket shell design, utilizing the oversized interface of PF30 and EVO386, but with the benefit and peace of mind of a threaded interface.

With an integrated dust cover for all models, a snug & secure fit that also fully protects the face of the bearing delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with un-paralleled durability & efficiency.

In the box: 2 cups with CeramicSpeed Bearings installed 2 dustcovers Spacer-tube 4 x 1mm spacers 2 x 3mm spacers CeramicSpeed All Round Grease Sticker sheet Technical Data The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The T47 for SRAM DUB Road comes in two versions; with our CeramicSpeed Standard Bearings and Coated Bearings for even longer lifetime and lower friction.  Compatible with:Frame: T47Opening diameter: Threads Shell width: 86 Also compatible with TREK T47 85.5mm wide frames.Bottom Bracket tool for installation: BBT-47.

Product description

T47a for 77mm asymmetrical shell.

T47a is a threaded bottom bracket shell design, utilizing the oversized interface of BB right, but with the benefit and peace of mind of a threaded interface. Compatible frames feature an asymmetrical 77mm shell width, placing the non-drive side bearing within the frame, and the drive side bearing externally.

Equipped with precision dust covers for a snug & secure fit that also fully protects the face of the bearing delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with un-paralleled durability & efficiency.

Bottom Bracket tool for installation: CeramicSpeed Dual Socket Tool T45/T47 16-notch 52,2mm cup tool diameter

In the box:

• 2 cups with CeramicSpeed bearings and dust covers
• 2-part spacer tube
• All Round Grease
• Decal

Product description

Italian-threaded bottom bracket shells are typically found on Italian-brand road bikes. The shell measures 70mm wide and has a 35mm inner diameter.

This kit has all the pieces necessary to install 24mm diameter spindle cranks into an ITA shell. Those cranks come from Shimano, FSA, and others.

CeramicSpeed bearings pressed into threaded cups, then threaded into the frame. Those bearings comprise either Standard or Coated Bearings. Super round, super smooth CeramicSpeed balls rotate in hardened-steel races in both. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag.

Bikeworkx CHAINN STAR EXTREM 50 ML

• suitable for extreme conditions

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions

DESCRIPTION

All Chamois Butt’r products are safe for women and men, but Her’ was made specifically for women’s more neutral skin pH by a female sports medicine physician in cooperation with professional women cyclists.  Women with more sensitive skin benefit from using products developed with the natural body chemistry in mind which is why we utilize premium ingredients including aloe vera, green tea leaf extract, tea tree oil, shea butter, & lavender oil for their naturally occurring beneficial properties.

KEY INGREDIENTS:

• Lavender Oil, Shea Butter
• Green Tea Leaf Extract
• Aloe Vera, Tea Tree Oil
• No parabens, phthalates, gluten or artificial fragrances

BENEFITS:

• No greasy residue
• Immediately improves comfort
• Soothes already chafed or irritated skin
• Rinses out of clothing and off of skin easily
• Won’t damage or discolor technical clothing

• Uniquely formulated, long-wearing synthetic leather material featuring prismatic Gamma style that is anti-slip with excellent performance in all conditions.
• Multi-layer, multi-density foam laminates effectively absorbs shock, dampens vibration and minimizes fatigue
• Highly elastic and lightweight organic adhesive will not leave residue on the handlebars to ease installation and adjustment
• Reusable, expanding locking bar plugs are reliable and resistance to falling out
• Highly elastic finishing tape does not deform, degrade of soften in extreme temperature and weather conditions.

• Uniquely formulated synthetic Halo Touch surface with prismatic texture sure to turn heads while improving grip and providing all-out performance.
• Multi-layer, multi-density foam laminates effectively absorbs shock, dampens vibration and minimizes fatigue.
• Highly elastic and lightweight organic adhesive will not leave residue on the handlebars to ease installation and adjustment.
• Reusable, expanding locking bar plugs are reliable and resistance to falling out.
• Highly elastic finishing tape does not deform, degrade of soften in extreme temperature and weather conditions.

• Tai Chi bottle cages are the optimal amalgamation of power and beauty, combining strong yet lightweight design with the beauty of carbon fiber finished in a fusion of color textures.
• Aerospace 3k carbon composite material is skillfully layered into a high strength structure ensuring secure holding of your bottle
• Includes lightweight, corrosion-free aluminum alloy bolts

Cleat Fit

Key features

• Weight: 226g

• Zero-Gravity CloudTec® provides a cushioned feel

• Packable and ultra-lightweight for travel

• Speedboard® engineered for all-day performance and support

• An updated mesh pattern provides increased breathability

• Kick-down heel with upgraded cushioning

• Updated outsole for more traction, grip