All Products
48 products
48 products
SHIMANO BB-MT500-PA
Regular price OMR 11
Shipping calculated at checkout.
| BOTTOM BRACKET PARTS, SM-BB92-41B, PRESS FIT TYPE FOR ROAD, RIGHT & LEFT ADAPTER, BEARING, INNER COVER, ETC, IND.PACK |
|
BOTTOM BRACKET PARTS, SM-BBR60, RIGHT & LEFT ADAPTER(BSA), BEARING, INNER COVER, ETC, W/TL-FC25, IND.PACK |
| BOTTOM BRACKET PARTS, SM-BB52, RIGHT & LEFT ADAPTER(BSA), BEARING, INNER COVER, ETC, IND.PACK |
| BOTTOM BRACKET PARTS, BB-RS500, RIGHT & LEFT ADAPTER(BSA), BEARING, IND.PACK |
| BOTTOM BRACKET PARTS, BB-MT800, RIGHT & LEFT ADAPTER(BSA), BEARING, INNER COVER, ETC, W/TL-FC25, IND.PACK |
| BOTTOM BRACKET PARTS, SM-BB70, RIGHT & LEFT ADAPTER(BSA), BEARING, INNER COVER, ETC, IND.PACK |
CERAMIC SPEED BB86 BOTTOM BRACKET FOR SRAM DUB ROAD COATED BLACK PF41X86
Regular price OMR 180
Shipping calculated at checkout.
The CeramicSpeed BB86 SRAM DUB Road bottom bracket for the installation of DUB cranks in a Pressfit frame with 86.5 mm bottom bracket width and 41 mm shell diameter is characterised by ceramic bearings that are exceptionally hard, smooth and resilient.
Type: Pressfit BB86
Shell Diameter: 41 mm
Shell Width: 86.5 mm
Axle Diameter: 28.99 mm (DUB)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
Specifications:
Application: Road, Triathlon & Time TrialType: Pressfit BB86
Shell Diameter: 41 mm
Shell Width: 86.5 mm
Axle Diameter: 28.99 mm (DUB)
Technical Information:
Bearings: ceramicCompatibility:
- SRAM DUB cranksFeatures:
- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- reduced friction: smoother running, more performance
- handmade in Denmark
Technology:
Ceramic Bearings by CeramicSpeedCeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!
KLS ACTIVE CARTRIDGE BOTTOM BRACKET SET
Regular price OMR 5
Shipping calculated at checkout.
DESCRIPTION
ACTIVE
SEALED BOTTOM BRACKET
Sealed bottom bracket KLS ACTIVE is made for all bikes which has cranks with common square bottom bracket mount
DETAILS
Sealed bearing
Square Taper chainwheel mount
BSA: BC1.37"x24T R/L 68mm
Nylon cups
2 Allen screws
Narrowed mid-section for internal routing
OPTIONS
Color: Black
Length: 126; 124,5; 122,5; 119; 117,5; 116; 113; 110mm
INCLUDED
Nylon cups
2 Allen screws
COMPATIBILITY
Bicycles which has cranks with common square bottom bracket mount
SHIMANO SM-BB72-41B 86.5MM
Regular price OMR 13
Shipping calculated at checkout.
SHIMANO ULTEGRA - Bottom Bracket - Press Fit - HOLLOWTECH II - 86.5 mm shell width
With reliable SHIMANO bearings and seals, the SHIMANO ULTEGRA bottom bracket has a long service life.
- Optimum power transfer
- Lightweight maintains efficiency
- DURA-ACE proven 4-arm design: Same stiffness and lighter weight
- 14 g lighter weight and half the friction of the SM-BB6700, while maintaining the same durability
- Variety choice of gearing: 53-39T/52-36T/50-34T/46-36T
- Weight: 69 g
SHIMANO XTR SM-BB93 68MM ST
Regular price OMR 18
Shipping calculated at checkout.
Shimano XTR SM-BB93 Bottom Bracket BSA Hollowtech II
SM-BB3 bottom bracket for Shimano XTR Hollowtech II cranksets. Light weight to offset weight disadvantage of drivetrain and with better sealing performance for smoother rotation.
Including BSA bottom bracket cups with right and left bearing shells and 3 spacers.
Compatibility:
- FC-M9100, FC-M9120
- FC-M9000, FC-M9020
- FC-M980, FC-M985
SHIMANO SM-BBR60 68MM ST
Regular price OMR 12
Shipping calculated at checkout.
Technical specifications:
intended use : road, cyclocross
Bearing shell material: aluminium
Material bearing: steel
Bottom Bracket Type: BSA
Bottom Bracket Shell Width: 68mm
Inner bearing housing Ø: 34.8 mm (with BSA thread)
Crank shaft diameter: 24mm
Compatibility crank: Hollowtech II
Tool holder: Hollowtech II tool + TL-FC25 adapter
Color: Black
intended use : road, cyclocross
Bearing shell material: aluminium
Material bearing: steel
Bottom Bracket Type: BSA
Bottom Bracket Shell Width: 68mm
Inner bearing housing Ø: 34.8 mm (with BSA thread)
Crank shaft diameter: 24mm
Compatibility crank: Hollowtech II
Tool holder: Hollowtech II tool + TL-FC25 adapter
Color: Black
SHIMANO BB-MT501
Regular price OMR 12
Shipping calculated at checkout.
Shimano BB-MT501 Bottom Bracket - Hollowtech II | Thread Type | BSA-68/73-24
The Shimano BB-MT501 bottom bracket at the level of the Deore series ensures smooth rotation of the crank's spindle improving the drive efficiency. In addition, a special seal design extends the service life noticeably. The bearing shells with BSA thread are perfectly matched to the interaction with Hollowtech II cranksets.
Material:
bearing shells: aluminum (anodized)
sleeve: resin
CERAMIC SPEED PF4130 BB FOR 30MM SPINDLE LONGER THAN 100MM COATED BLACK
Regular price OMR 180
Shipping calculated at checkout.
Product description Ceramicspeed PF4130 Coated Bottom Bracket Cup
The PF4130 bottom bracket is Press Fit into 41mm diameter shells that are 86.5mm wide and mate most cranks with a 30mm spindle to that standard.
If you have a BB86 frame and want to install a 386EVO crank or Rotor 30mm crank, this is the kit you need.
CeramicSpeed bearings are installed in cups.
The Standard Bearing has ceramic CS balls and hardened-steel races.
The Coated Bearing has the same balls running on hardened-steel races with a 3-micron thick metallic coating making the races harder and smoother, increasing service life and reducing friction.
CAMPAGNOLO ULTRA TORQUE FC-RE012 BEARINGS & SEALS
Regular price OMR 25
Shipping calculated at checkout.
Description
Campagnolo Stainless Steel Cartridge Bearing kit (pair)
Standard equipment on 2009 & later Chorus cranksets & Pre 2011 Record UT Cranksets
Fits all Campy Ultra Torque Cranksets
Campagnolo Part # FC-RE012
BBB BOTTOM BRACKET BOTTOMFIT PF30 46MM X 68/73MM N/A OSFA BBO 09
Regular price OMR 35
Shipping calculated at checkout.
BottomFit PF30
Model number: BBO-09
- High-end PF30 bottom bracket
- 3-piece threaded design
- Self-aligning bearings increases durability
- Chrome steel BB30 6806RS bearings
- Fully CNC machined
Specifications
SHIMANO BOTTOM BRACKET, BB-R9100 (ITALIAN THREAD), BEARING, W/TL-FC24, INDPACK
Regular price OMR 18
Shipping calculated at checkout.
SHIMANO DURA-ACE - Bottom Bracket - Threaded - HOLLOWTECH II - 68/70 mm shell width
With an advanced seal construction for smoother rotation and small ball bearings to minimize weight, the SHIMANO DURA-ACE bottom bracket is offered in both pressfit and threaded options.
FEATURES
- Bottom bracket with small ball bearings for lightweight
- Advanced seal construction for smoother rotation
FSA PF30 ROAD BOTTOM BRACKET 46 x 68-86.5 MM
Regular price OMR 25
Shipping calculated at checkout.
A variant of the BB30 design: the Press Fit 30 Bottom Bracket by FSA
Press fit refers to one of the newer bottom bracket standards, and was first introduced to the market by SRAM as Press Fit 30. The bearings are located in bearing cups that are pressed directly into the bottom bracket shell. Characteristic is the installation dimension of 46 mm and the shell width of 68 / 73 mm or 86.5 mm. A PF30 bottom bracket always takes only one axle with 30 mm diameter - hence the name.
Specifications:
- Application:
- Road, Cross Country
- Type:
- Press Fit PF30, BB386EVO
- Shell Diameter:
- 46 mm
- Shell Width:
- 68-86.5 mm
- Axle Diameter:
- 30 mm
Technical Information:
- Bearings:
- steel or ceramic
Compatibility:
- BB30 Road cranks
- BB386EVO cranks*
* when installed in a BB386EVO frame. If a BB386EVO crank is to be mounted in a Press Fit 30 frame, an additional MW258A adapter is required.
Note:
The 200-3112 bottom bracket also does the following:
- Installation of FSA MegaExo NBD, MegaExo Pinch Bolt, Shimano and SRAM GXP Road cranks in BB386EVO frames
- Installation of FSA MegaExo NBD, MegaExo Pinch Bolt and Shimano Road cranks in Press Fit 30 frames
- Installation of FSA BB386EVO, MegaExo NBD and MegaExo Pinch Bolt Road cranks in Cannondale press fit 30A 73 mm frames
-
- nstallation of FSA BB386EVO Road cranks in BBRight Press Fit 79 mm frames
- Installation of FSA BB392EVO, MegaExo NBD 24 mm, MegaExo NBD 19 mm, MegaExo Pinch Bolt 24 mm and Shimano MTB cranks in 68/73 mm PF30 frames
The 200-3111 bottom bracket also does the following:
- Installation of FSA MegaExo NBD Road cranks in BB386EVO frames
- Installation of FSA MegaExo NBD Road cranks in Press Fit 30 frames
- Installation of FSA BB392EVO, MegaExo NBD 24 mm, MegaExo Pinch Bolt 24 mm and Shimano MTB cranks in 68/73 mm PF30 frames
Models:
Standard:
- Bearings: steel
- Recommended Cranks: SL-K Light, Energy, Gossamer Pro, Omega, Vision TriMax Pro
- Model Number: BB-PF6000/CZ
- Manufacturer Number: 200-3112
ceramic:
- Bearings: ceramic
- Recommended Cranks: K-Force Light, TriMax Carbon TT
- Model Number: BB-PF8200/CZ
- Manufacturer Number: 200-3111
Contents:
- 1 x FSA PF 30 right bearing cup, incl. bearings and sleeve
- 1 x FSA PF 30 left bearing cup, incl. bearings and sleeve
- 1 x FSA bottom bracket centre sleeve
- 1 x spring wave washer
- incl. dust cap
Weight:
- red/ceramic: 76 g
SRAM GXP PRESSFIT 41 x 86.5/92 MM BOTTOM BRACKET MTB
Regular price OMR 25
Shipping calculated at checkout.
or the Pressfit bearing standard: the bottom bracket by Truvativ
Pressfit bottom brackets use the same bearing technology as the current GXP bottom brackets and offer the same performance in terms of durability and longevity. Pressfit bottom brackets are not screwed into the bicycle frame, as is usual with GXP bottom brackets, but are pressed into the frame.
Technical Information:
- Application:
- MTB, Road
- Cup Material:
- composite material
- Fitting:
- BB86, BB92
- Shell Diameter:
- 41 mm
- Shell Width:
- 86.5mm / 89.5 - 92mm
- Bearings:
- cartridge w/ steel balls (standard)
- Compatibility:
- only for Pressfit frames
Size Guide:
Road:
- Application: Road
- Bottom Bracket Standard: BB86
- Shell Width: 86.5 mm
- Manufacturer Number: 00.6415.033.000
MTB:
- Application: MTB
- Bottom Bracket Standard: BB92
- Shell Width: 89.5 - 92 mm
- Manufacturer Number: 00.6415.033.020
Contents:
- 1 x Truvativ GXP Pressfit right bearing cup, incl. bearings
- 1 x Truvativ GXP Pressfit left bearing cup, incl. bearings
- 1 x Truvativ GXP Pressfit centre tube
SRAM GXP PRESSFIT 41 x 86.5/92 MM BOTTOM BRACKET ROAD
Regular price OMR 25
Shipping calculated at checkout.
For the Pressfit bearing standard: the bottom bracket by Truvativ
Pressfit bottom brackets use the same bearing technology as the current GXP bottom brackets and offer the same performance in terms of durability and longevity. Pressfit bottom brackets are not screwed into the bicycle frame, as is usual with GXP bottom brackets, but are pressed into the frame.
Technical Information:
- Application:
- MTB, Road
- Cup Material:
- composite material
- Fitting:
- BB86, BB92
- Shell Diameter:
- 41 mm
- Shell Width:
- 86.5mm / 89.5 - 92mm
- Bearings:
- cartridge w/ steel balls (standard)
- Compatibility:
- only for Pressfit frames
Size Guide:
Road:
- Application: Road
- Bottom Bracket Standard: BB86
- Shell Width: 86.5 mm
- Manufacturer Number: 00.6415.033.000
MTB:
- Application: MTB
- Bottom Bracket Standard: BB92
- Shell Width: 89.5 - 92 mm
- Manufacturer Number: 00.6415.033.020
Contents:
- 1 x Truvativ GXP Pressfit right bearing cup, incl. bearings
- 1 x Truvativ GXP Pressfit left bearing cup, incl. bearings
- 1 x Truvativ GXP Pressfit centre tube
FSA BB-6000 MEGAEXO 24MM BSA
Regular price OMR 22
Shipping calculated at checkout.
FSA BB-6000 BSA MegaExo 24mm Road Bottom Bracket
FSA MegaExo Road Bottom Bracket for Gossamer MegaExo crank. Double O-ring seal, for 24mm hollow shaft, anodized surface. Cartride MegaExo oversized bearings and CNC-machined aluminium MegaExocbearings.
Color - BB-6000 BSA MegaExo 24mm Road bottom bracket
- silver
Weight
- 103g (manufacturer specification)
FSA BB-8681 MegaExo 24mm NBD BSA
Regular price OMR 22
Shipping calculated at checkout.
FSA MegaExo BB-8681 Bottom Bracket
FSA MegaExo Road Bottom Bracket for SL-K Licht crank. Double O-ring seal, for 24mm hollow shaft, anodized surface. Cartride MegaExo oversized bearings and CNC-machined aluminium MegaExocbearings.
Product features
- Compatible with:
- SL-K Light
- Team Issue
- Shimano® Di2
- Bearing: CrMo Steel
- Width: 68 mm
- BSA thread 1.37 x 24 T
- For 24 mm axles
